| |
Product SKUs |
| SYS-1028UX-CR-LL1 | SuperServer 1028UX-CR-LL1 (Black) |
| |
Motherboard |
| Super X10DRU-XLL |
| |
Processor/Cache |
| CPU | - Intel® Xeon® processor E5-2643 v3
- (up to 160W TDP **)
- Dual Socket R3 (LGA 2011)
|
| Cores / Cache | Up to 18 Cores / Up to 45MB Cache |
| System Bus | QPI up to 9.6 GT/s |
| Note | ** Please contact your Supermicro sales representative for additional details. |
| |
System Memory |
| Memory Capacity | - 16x 288-pin DDR4 DIMM sockets
- Up to 1TB ECC LRDIMM, 768GB ECC RDIMM
|
| Memory Type | 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | - RDIMM: 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64 GB, 32 GB
|
| Memory Voltage | 1.2 V |
| Error Detection | Corrects single-bit errors |
| |
On-Board Devices |
| Chipset | Intel® C612 Express chipset |
| SAS | LSI 3108 SAS3 (12Gbps) controllers; RAID 0, 1, 5, 6, 10, 50 support |
| SATA | SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- ASPEED AST2400 BMC
|
| Graphics | ASPEED AST2400 BMC |
| |
Input / Output |
| SAS | 8x SAS-3 (12 Gb/s) ports |
| SATA | 2x SATA-3 (6 Gb/s) ports |
| NVMe | 2x NVMe ports support via optional Add-on Card (AOC-SLG3-2E4) |
| LAN | - 4x RJ45 Gigabit Ethernet ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB | 5x USB 3.0 ports(2 rear, 2 via header, 1 Type A) |
| Video | 1x VGA Connector |
| Serial Port / Header | - 1x Fast UART 16550 serial
- 1x COM port (rear)
|
| |
System BIOS |
| BIOS Type | 128 Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | - Plug and Play (PnP)
- APM 1.2
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI 2.3.1
|
| |
Chassis |
| Form Factor | 1U Rackmount |
| Model | CSE-119UTS-R750P |
| |
Dimensions and Weight |
| Height | 1.7" (43 mm) |
| Width | 17.2" (437mm) |
| Depth | 30.6" (777 mm) |
| Gross Weight | 48 lbs (21.8 kg) |
| Available Colors | Black |
| |
Front Panel |
| Buttons | - Power On/Off button
- System Reset button
|
| LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED / Fan fail LED / UID LED
|
| |
Expansion Slots |
| PCI-Express | - Expansion slots via riser card:
- 2x PCI-E 3.0 x16, Full-heigh Full-length
- 1x PCI-E 3.0 x8, Low-profile
- 1x PCI-E 3.0 x8 SAS3 integrated
|
| |
Drive Bays |
| Hot-Swap | - 8x 2.5" Hot-swap SAS3 drive bays
- 2x 2.5" Hot-swap SATA3 drive bays
|
| |
System Cooling |
| Fans | 8x heavy duty fans with optimal fan speed control |
| Air Shroud | 1x Air Shroud |
| |
Power Supply |
| 750W Redundant AC-DC Power Supplies, +12V/+12Vsb output |
| AC Input | - 100-127Vac, 50-60Hz
- 200-240Vac, 50-60Hz
|
| +12 V | - Max: 62.5A & Min: 0A (100Vac-127Vac)
- Max: 62.5A & Min: 0A (200Vac-240Vac)
|
| 12V SB | |
| Certification | Platinum Level |
| |
PC Health Monitoring |
| CPU | - Monitors for CPU cores,+1.5 V, +3.3 V, +5 V, +12 V, +5 Stdby, +3.3 Stdby, VBAT, Memory voltages.
- CPU core 6-Phase-switching voltage regulator
|
| FAN | - Total of ten 4-pin PWM fans
- 10x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
|
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 10x Fan Connectors
- PSU I²C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED | - Power Fail / Overheat LED
- Supsend-State Indicator LED
- UID LED
|
| Other Features | SDDC Support |
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant |
| Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|
0 Artikel
