|
Product SKUs |
SYS-1028U-TNRTP+ | SuperServer 1028U-TNRTP+ (Black) |
|
Motherboard |
Super X10DRU-i+ |
|
Processor/Cache |
CPU | - Intel® Xeon® processor E5-2600 v4/
- v3 family
- (up to 145W TDP)
- *
- Dual Socket R3 (LGA 2011)
|
Cores / Cache | Up to 22 Cores / Up to 55MB Cache |
System Bus | QPI up to 9.6 GT/s |
Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
|
System Memory |
Memory Capacity | - 24x 288-pin DDR4 DIMM slots
- Up to 3TB ECC 3DS LRDIMM, 768GB ECC RDIMM
|
Memory Type | 2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
DIMM Sizes | 64GB, 32GB, 16GB, 8GB, 4GB |
Memory Voltage | 1.2 V |
Error Detection | Corrects single-bit errors |
|
On-Board Devices |
Chipset | Intel® C612 chipset |
SATA | SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- ASPEED AST2400 BMC
|
Network Connectivity | - 2x 10G SFP+ ports via AOC-URN2-I2XS
- Intel® 82599ES 10G SFP+
- 1x Realtek RTL8211E PHY (dedicated IPMI)
|
Graphics | ASPEED AST2400 BMC |
|
Input / Output |
SATA | 10x SATA3 (6Gbps) ports |
SAS | 8x SAS3 ports support via optional Add-on Card |
NVMe | 2x NVMe ports |
LAN | - 2x 10G SFP+ ports
- 1x RJ45 Dedicated IPMI LAN port
|
USB | 5x USB 3.0 ports(2 rear, 2 front panel, 1 Type A) |
Video | 1x VGA Connector |
Serial Port | 1x Serial header |
|
System BIOS |
BIOS Type | 128 Mb SPI Flash EEPROM with AMI BIOS |
BIOS Features | - Plug and Play (PnP)
- APM 1.2
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI 2.3.1
|
|
Management |
Software | - SuperDoctor® 5
- Intel® Node Manager 3.0
- Watch Dog
- NMI
- SUM and SSM
- Optional IPMI 1.5 / 2.0
|
Power Configurations | - ACPI Power Management
- Power-on mode for AC power recovery
|
|
Chassis |
Form Factor | 1U Rackmount |
Model | CSE-119UAC2-R750 |
|
Dimensions and Weight |
Height | 1.7" (43 mm) |
Width | 17.2" (437mm) |
Depth | 27.82" (707mm) |
Weight | - Net Weight: 26 lbs (11.8 kg)
- Gross Weight: 41 lbs (18.6 kg)
|
Available Colors | Black |
|
Front Panel |
Buttons | - Power On/Off button
- System Reset button
|
LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED / Fan fail LED / UID LED
|
|
Expansion Slots |
PCI-Express | - 2x PCI-E 3.0 x16 slots (Full-height, 10.5" L)
- 2x PCI-E 3.0 x8 slots (Low-profile, 1 internal)
- (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
|
|
Drive Bays |
Hot-Swap | - 10x 2.5" Hot-Swap drive bays
- Default 8x SATA3 ports and 2x NVMe/SATA3 hybrid ports
- Optional 8x SAS3 ports via AOC
|
|
System Cooling |
Fans | - 5x heavy duty fans with optimal fan speed control
- 3x additional fans optional
|
Air Shroud | 1x Air Shroud |
|
Power Supply |
750W Redundant AC-DC Power Supplies, +12V/+12Vsb output |
AC Input | - 100-127Vac, 50-60Hz
- 200-240Vac, 50-60Hz
|
+12 V | - Max: 62.5A & Min: 0A (100Vac-127Vac)
- Max: 62.5A & Min: 0A (200Vac-240Vac)
|
12V SB | |
Certification | Platinum Level |
|
PC Health Monitoring |
Voltage | - Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
- 5+1 Phase-switching voltage regulator
|
FAN | - 8x 4-pin fan headers
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
|
Temperature | - Support to monitor Supermicro AOC temperatures from IPMI or SD 5
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x Fan Connectors
- Thermal Monitor 2 (TM2) support
- PECI
|
LED | - Memory DIMM ECC error LEDs
- CPU / System Overheat LED
- Supsend-State Indicator LED
- UID/Remote UID
|
Other Features | - 4x 8-pin GPU power connectors
- Chassis intrusion detection
- Chassis intrusion header
- SDDC Support
- RoHS
|
|
Operating Environment / Compliance |
RoHS | RoHS Compliant |
Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 60 °C (-40 °F to 140 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|