| |
Product SKUs |
| SYS-1028R-WTRT | SuperServer 1028R-WTRT (Black) |
| |
Motherboard |
| Super X10DRW-iT |
| |
Processor/Cache |
| CPU | - Intel® Xeon® processor E5-2600 v3 family
- (up to 145W TDP **)
- Dual Socket R3 (LGA 2011)
|
| Cores / Cache | Up to 18 Cores / Up to 45MB Cache |
| System Bus | QPI up to 9.6 GT/s |
| Note | ** Please contact your Supermicro sales representative for additional details. |
| |
System Memory |
| Memory Capacity | - 16x 288-pin DDR4 DIMM sockets
- Up to 1TB ECC LRDIMM, 512GB ECC RDIMM
|
| Memory Type | 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | - RDIMM: 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64 GB, 32 GB
|
| Memory Voltage | 1.2 V |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
On-Board Devices |
| Chipset | Intel® C612 Express chipset |
| SATA | SATA3 (6Gbps); RAID 0, 1, 5, 10 |
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- ASPEED AST2400 BMC
|
| Network Controllers | - Intel X540 Dual port 10GBase-T
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8211E PHY (dedicated IPMI)
|
| Video | ASPEED AST2400 BMC |
| |
Input / Output |
| Serial ATA | 10x SATA3 (6Gbps) ports |
| LAN | - 2x RJ45 10GBase-T ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB | 6x USB 3.0 ports (4 rear + 2 via header) |
| Video | 1x VGA port |
| Serial Port / Header | 1x Fast UART 16550 header |
| DOM | 2x SuperDOM (Disk on Module) ports |
| |
PC Health Monitoring |
| Voltage | - Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
- 5+1 Phase-switching voltage regulator
|
| FAN | - 6x 4-pin fan headers (up to 6 fans)
- 6x fans with tachometer monitoring
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x Fan Connectors
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED | - CPU / System Overheat LED
- Supsend-State Indicator LED
- UID/Remote UID
|
| Other Features | - Chassis intrusion detection
- Chassis intrusion header
- SDDC Support
- RoHS
|
| |
Chassis |
| Form Factor | 1U Rackmount |
| Model | CSE-116TQ-R706WB |
| |
Dimensions and Weight |
| Width | 17.2" (437mm) |
| Height | 1.7" (43 mm) |
| Depth | 23.5" (597 mm) |
| Gross Weight | 46 lbs (20.9 kg) |
| Available Colors | Black |
| |
Front Panel |
| Buttons | - Power On/Off button
- UID button
|
| LEDs | - Power status LED
- HDD activity LED
- 2x Network activity LEDs
- Universal Information (UID) LED
|
| |
Expansion Slots |
| PCI-Express | 2x PCI-E 3.0 x16 full-height, Half-length slots |
| |
Drive Bays |
| Hot-Swap | 10x Hot-swap 2.5" SAS / SATA HDD trays (connected to onboard storage controller) |
| |
Backplane |
| SAS/SATA HDD Backplane |
| |
System Cooling |
| Fans | 5x 4cm heavy-duty counter-rotating fans w/ air shroud and optimal fan speed control |
| |
Power Supply |
| 700 W/750 W Redundant AC-DC high-efficiency power supply with PMBus and I²C |
| AC Voltage | - 700W: 100 - 140 V, 50-60 Hz
- 750W: 200 - 240V, 50-60 Hz
|
| +5 V | 25 A |
| DC Output +5 V standby | 3 A |
| DC Output +12 V | - 700 W: 58 A @ 100-140 V
- 750W: 62 Amp @ 200-240V
|
| Certification | Platinum Certified (Cert. in progress) |
| -12 V | 0.5 A |
| +3.3 V | 12 A |
| |
System BIOS |
| BIOS Type | 128 Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | - Plug and Play (PnP)
- APM 1.2
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI 2.3.1
|
| |
Management |
| Software | - SuperDoctor® 5
- Watch Dog
- NMI
- IPMI 2.0
- Intel Node Manager
|
| Power Configurations | - ACPI / APM Power Management
- Power-on mode for AC power recovery
|
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant |
| Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|
0 Artikel
