| |
Product SKUs |
| SSG-6048R-E1CR72L | SuperServer 6048R-E1CR72L (Black) |
| |
Motherboard |
| Super X10DRH-iT |
| |
Processor/Cache |
| CPU | - Intel® Xeon® processor E5-2600 v4/
- v3 family
- (up to 145W TDP)
- *
- Dual Socket R3 (LGA 2011)
|
| Cores / Cache | Up to 22 Cores / Up to 55MB Cache |
| System Bus | QPI up to 9.6 GT/s |
| Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| |
System Memory |
| Memory Capacity | - 16x 288-pin DDR4 DIMM slots
- Up to 2TB ECC 3DS LRDIMM, 512 ECC RDIMM
|
| Memory Type | 2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | - RDIMM:
- 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64 GB, 32 GB
- 3DS LRDIMM: 128GB
|
| Memory Voltage | 1.2 V |
| Error Detection | Corrects single-bit errors |
| |
On-Board Devices |
| Chipset | Intel® C612 chipset |
| SAS | - SAS3 (12Gbps) via 3x LSI 3008 (AOC)
- IT mode firmware
|
| SATA | SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- ASPEED AST2400 BMC
|
| Network Controllers | - Intel® X540 Dual Port 10GbE
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Realtek RTL8201N PHY (dedicated IPMI)
|
| Graphics | ASPEED AST2400 BMC |
| |
Input / Output |
| Serial ATA | 6 SATA3 (6Gbps) ports |
| LAN | - 2 RJ45 10GBase-T LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB | - 2 USB 3.0 ports (rear)
- 2 USB 2.0 ports (rear)
- 1 Type A
|
| VGA | 1x VGA port |
| Serial Port / Header | 1 Fast UART 16550 port / 1 Header |
| |
Chassis |
| Form Factor | 4U Rackmount |
| Model | CSE-847DTS-R2K04LPB |
| |
Dimensions and Weight |
| Width | 17.2" (437mm) |
| Height | 7" (178 mm) |
| Depth | 35" (889mm) |
| Weight | - Gross Weight: 104 lbs (47.2 kg)
- Net Weight: 67 lbs (30.4 kg)
|
| Available Colors | Black |
| |
Front Panel |
| Buttons | - Power On/Off button
- System Reset button
|
| LEDs | - Power status LED
- Hard drive activity LED
- 2 Network activity LEDs
- System Overheat LED
- Power fail LED
|
| |
Expansion Slots |
| PCI-Express | - 1 PCI-E 3.0 x16, 3 PCI-E 3.0 x8 slots
- 3 slots occupied by IT Mode disk controller, LSI 3008
|
| |
Drive Bays |
| Hot-Swap | - 72x 3.5" Hot-swap SAS3/SATA3 drive bays with SES2
- Double-sided storage
- 2x 2.5" Hot-swap SATA drive bays (rear)
|
| Fixed | 2x 2.5" Fixed bays |
| |
Backplane |
| SAS3/SATA3 single expander per backplane |
| |
System Cooling |
| Fans | 7x 92mm hot-swap cooling fans |
| |
Power Supply (76mm Width) |
| 2000W Redundant Power Supplies with PMBus |
| Total Output Power | 1000W/2000W |
| Dimension(W x H x L) | 76 x 40.4 x 336 mm |
| Input | - 100-127 Vac / 12-9.5 A / 50-60 Hz
- 200-220 Vac / 10-9.5 A / 50-60 Hz
- 220-230 Vac / 10-9.8 A / 50-60 Hz
- 230-240 Vac / 10-9.8 A / 50-60 Hz
- 200-240 Vac / 11.8-10 A / 50-60 Hz (UL/cUL only)
|
| +12 V | - Max: 83.3A & Min: 0A (100-127 Vac)
- Max: 150A & Min: 0A (200-220 Vac)
- Max: 165A & Min: 0A (220-230 Vac)
- Max: 166.7A & Min: 0A (230-240 Vac)
- Max: 166.7A & Min: 0A (200-240 Vac)(UL/cUL only)
|
| +5Vsb | Max: 1A / Min: 0A |
| Output Type | 27 Pairs Gold Finger Connector |
| Certification | UL/cUL/CB/BSMI/CE/CCC Titanium Level |
| |
System BIOS |
| BIOS Type | 128 Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | - Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant |
| Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|
0 Artikel
