| |
Product SKUs |
| MBD-PDSBM-LN2+-O | PDSBM-LN2+ (Standard Retail Pack) |
| MBD-PDSBM-LN2+-B | PDSBM-LN2+ (Bulk Pack) |
| |
Physical Stats |
| Form Factor | uATX |
| Dimensions | 9.6" x 9.6 ", (24.4cm x 24.4cm) |
| |
Processor/Cache |
| CPU | - Single LGA775 ZIF Socket
- Supports a Dual-Core Intel® Xeon® 3000 Series
- Supports an Intel® Core?2 Duo E6000 and E4000 Series
- Supports Intel Pentium E2000 Series
- Supports Intel Pentium D 945, 935, 925, 915
- and 820, 805
- Supports Intel Pentium 4 600 and 500 Series
- Supports Intel Celeron E1000 Series
- Supports an Intel Celeron 400 Series
- Supports Intel Celeron D 300 Series
- NOTE: This board DOES NOT support Q9000, E8000, E7000, E5000 series or 45 nm processor
|
| System Bus | 1066 / 800 / 667 MHz system bus |
| |
System Memory |
| Memory Capacity | - Two 240-pin DIMM sockets
- Supports up to 4 GB of unbuffered, non-ECC DDR2 667/533MHz memory (Single / Dual Channel)
|
| Memory Type | DDR2 667/533MHz unbuffered, non-ECC SDRAM, 240-pin gold-plated DIMMs |
| DIMM Sizes | 256 MB, 512 MB, 1 GB, 2 GB |
| Memory Voltage | 1.8 V only |
| |
On-Board Devices |
| Chipset | - Intel 946GZ
- ICH7R + Intel® 82573
|
| Serial ATA | - Intel® ICH7R SATA2 (3 Gbps) controller built-in
- Intel:
- RAID 0, 1, 5, 10 support (Windows Only)
|
| Network Controllers | - 2 x Intel® 82573 Gigabit PCI-Express Ethernet
- Supports 10BASE-T, 100/1000BASE-TX, RJ45 output
|
| Graphics | On Chip Intel 946GZ video |
| Super I/O | Winbond 83627DHG chip |
| Clock Generator | ICS9LPRS511 |
| |
Input / Output |
| Serial ATA | - Four SATA ports ( 3 Gb/s )
- Four SATA hard drives supported
|
| IDE | - One EIDE channel supports up to two UDMA/IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
| Floppy | 1x Floppy controller; 1.44 MB |
| LAN | 2x RJ45 LAN ports |
| USB | - 4x USB 2.0 / 1.1 compatible
- 2 in front (FUCI), 2 in rear
|
| VGA | Intel 946GZ on chip |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Ports | - 1x Fast UART 16550 serial port
- 1x Serial Header
|
| |
Chassis ( Optimized for PDSBM-LN2+ ) |
| 1U | - CSE-811T-300
- CSE-513F-260 (Mini 1U)
- CSE-512F-260 (Mini 1U)
- CSE-813MFT-300C (OEM and SuperServer only)
- CSE-502-200B
- CSE-503-200B
- CSE-510-200B
|
| 1U
(For Low-Voltage CPU only) | - CSE-811T-260
- (Mini 1U)
- CSE-512L-260 (Mini 1U)
- CSE-513L-260 (Mini 1U)
|
| Important Note | Only Supermicro 1U chassis is recommended for 1U Building Block Solutions |
| |
Expansion Slots |
| Universal Slot | - 1 (x4) (x8 physical) PCI-Express Slot OR
- 1x 32-bit 33MHz PCI Slot
|
| PCI | 1x 32-bit 33MHz PCI (5V) slots |
| |
System BIOS |
| BIOS Type | 8Mb Flash EEPROM with PhoenixBIOS® |
| BIOS Features | - Plug and Play (PnP)
- APM 1.2
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- Hardware BIOS Virus protection
- SMBIOS 2.3
|
| |
Management |
| Software | - SuperDoctor® III
- Watch Dog
- NMI
|
| Power Configurations | - ACPI/APM Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Suspend to RAM (STR)
- Power-on mode control for AC power recovery
- Internal / External modem remote ring-on
|
| |
PC Health Monitoring |
| Voltage | - Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V/+5V Standby, VBAT, HT, Memory, Chipset
- CPU core 4-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
|
| FAN | - Total of five 4-pin fan headers
- 5x fans with tachometer monitoring
- Status monitor for speed control
- Status Monitor for on / off control
- Support 3-pin PWM fans (with speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan conn.
|
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x Fan Connectors
- I²C temperature sensing logic
- Thermal Monitor 2 (TM2) Support
- PECI
|
| LED | - CPU / System Overheat LED
- Supsend-State Indicator LED
- +5 V standby alert LED
|
| Other Features | - Chassis intrusion Detection
- Chassis intrusion Header
- SDDC Support
|
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant 6/6, Pb Free |
| Environmental Specifications | - Operating Temperature: 10° to 35 °C (50° to 95 °F)
- Non-operating temperature: -40° to 70 °C (-40° to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5 to 95% (non-condensing)
|
| |
Regulatory |
| FCC | Passed to meet FCC standard requirement |
0 Artikel
