| |
Product SKUs |
| MBD-X9SRD-F -B | X9SRD-F (Bulk Pack) |
| |
Physical Stats |
| Form Factor | Proprietary |
| Dimensions | 4.75" x 15.95", (12.06cm x 40.51cm) |
| |
Processor/Cache |
| CPU | - Single Socket R (LGA 2011)
- Intel® Xeon® processor E5-2600/1600 and E5-2600/1600 v2 family?
- (up to 12 cores and up to 130 W)
|
| Note | ? BIOS version 3.0 or above is required |
| |
System Memory |
| Memory Capacity | - 4x 240-pin DDR3 DIMM sockets
- Supports up to 128 GB DDR3 ECC registered memory (RDIMM)
- Supports up to 32 GB DDR3 ECC unbuffered memory (UDIMM)
|
| Memory Type | 1866/1600/1333/1066 MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 32 GB, 16 GB, 8 GB, 4 GB, 2 GB, 1 GB, 64 GB LRDIMM |
| Memory Voltage | 1.5 V |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
On-Board Devices |
| Chipset | Intel® C602J PCH chipset |
| SATA | - 1x SATA DOM
- SATA 3.0 6Gb/s with RAID 0, 1, 5, 10
|
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Nuvoton WPCM450 BMC
|
| Network Controllers | 1x Realtek RTL8201N PHY (dedicated IPMI) |
| VGA | Matrox G200eW 16MB DDR2 |
| |
Input / Output |
| Serial ATA | 2 SATA 3.0 ports (6Gb/s) |
| LAN | 1x RJ45 Dedicated IPMI LAN port |
| USB | 2 USB 2.0 ports (1 header + 1 type A) |
| VGA | 1x VGA port |
| Serial Port / Header | 2 Fast UART 16550 serial port(one header and one rear port) |
| DOM | 1x DOM (Disk on Module) power connector |
| TPM | 1 TPM 1.2 20-pin Header |
| |
Chassis ( Optimized for X9SRD-F
) |
| 3U Chassis | CSE-938H-R1620B |
| Important Chassis Notes | To support the new generation Intel® Xeon® processor-based motherboards, a Revision K chassis is recommended for most models. Please talk to your sales representative or follow the link for details. |
| |
Expansion Slots |
| PCI-Express | 1x (x8) PCI-E 2.0 slot |
| |
System BIOS |
| BIOS Type | 32Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | - Plug and Play (PnP)
- APM 1.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- RTC (Real Time Clock) Wakeup
|
| |
Management |
| Software | - IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
- SuperDoctor® III
- Watch Dog
- NMI
|
| Power Configurations | - ACPI / ACPM Power Management
- Main Switch Override Mechanism
- Power-on mode for AC power recovery
- Suspend to RAM (STR)
|
| |
PC Health Monitoring |
| Voltage | - Monitors for CPU cores, +1.8 V, +3.3 V, +5 V, ±12 V, +3.3 V Standby, +5 V Standby, VBAT, HT, Memory, chipset voltages.
- 5-Phase-switching voltage regulator with auto-sense from 0.8375 V - 1.60 V
|
| FAN | - Total of 5 fan headers supporting up to 5 fans
- Five 4-pin fan headers
- 5x fans with tachometer status monitoring
|
| Temperature | - CPU thermal trip support
- FC temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED | - CPU / System Overheat LED
- +5 V Standby alert LED
- UID/Remote UID
|
| Other Features | |
0 Artikel
