| |
Product SKUs |
| MBD-H8SMi-2-O | H8SMi-2 (Standard Retail Pack) |
| MBD-H8SMi-2-B | H8SMi-2 (Bulk Pack) |
| |
Physical Stats |
| Form Factor | ATX |
| Dimensions | - 12" x 9.6 " (30.5cm x 24.4cm)
- 6 layers
|
| |
Processor/Chipset |
| CPU | - Single 940-pin AM2 Socket
- Supports one Quad-Core AMD Opteron™ 1000 Series(Socket AM2) processorNOTE: Motherboard PCB revision 2.xx is needed to support quad-core processor
|
| System Bus | 1000MHz HyperTransport |
| Chipset | nVidia MCP55 Pro |
| |
System Memory |
| Memory Capacity | - Four 240-pin DIMM sockets
- Supports up to 8 GB DDR2 800/667/533 MHz memory
- Single or Dual (recommended) channel memory
|
| Memory Type | DDR2 800/667/533MHz un-buffered ECC / non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 256 MB, 512 MB, 1GB, 2 GB |
| Memory Voltage | 1.8 V only |
| |
On-Board Devices |
| SATA | - nVidia MCP55 Pro SATA2 3.0Gbps Controller
- 6 SATA Ports
- nVidia RAID 2.0
- SATA RAID 0, 1, 0+1, 5, JBOD Support
|
| IDE | - Supports UDMA Mode 5
- Supports PIO Mode 4
- Supports ATA/100/133
|
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- 200-pin IPMI slot
- (Optional: AOC-SIMLP-B(+) R 3.00) **
- (Optional: AOC-SIMLP-3(+) R 3.00) ** with 3rd LAN support
- (Optional: AOC-SIM1U(+) R 3.00) ** for 1U
- RMM (Remote Management Module)
- (Card not included)
|
| Network Controllers | - nVidia MCP55 Pro Chipset Dual-port LAN / Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
|
| VGA | - ATI ES1000 Graphics Controller
- 16MB Graphics & VGA port
|
| Super I/O | Winbond 83627HF |
| |
Input / Output |
| SATA | Up to six SATA2 devices |
| IDE | - Single ATA 133/100 EIDE channels support up to two UDMA IDE devices
- Supports UDMA Mode 5
- Supports ATA133/100
|
| Floppy | 1 Floppy port 1.44 MB |
| LAN | 2 RJ45 LAN ports |
| USB | - 2 USB Rear Ports
- 4 USB Internal Headers
- 6 Total USB 2.0 Compliant, 1.1 Compatible
|
| VGA | 1x VGA port |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Ports | - 1x Fast UART 16550 serial ports
- 1x Header
|
| Others | 1 SATA DOM power connector |
| |
Chassis ( Optimized for H8SMi-2 ) |
| Important Chassis Notes | - To ensure system stability, a 300W (minimum) ATX power supply
- [4-pin (+12V) and 24-pin are required]
|
| |
Server(s) ( with H8SMi-2 ) |
| Model(s) | AS -1011M-T2 |
| |
Expansion Slots |
| PCI-Express | - 1 x16 PCI-e slot(nVidia SLI Technology Supported)
- 1 x8 PCI-e using x16 slot
- 1 x4 PCI-e using x8 slot
|
| PCI | 3 PCI 32-bit, 33MHz slots |
| |
System BIOS |
| BIOS Type | 4Mb Flash EEPROM with AMI® BIOS |
| BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- BIOS Rescue Hot Keys
- SMBIOS 2.3
- USB Keyboard support
- Hardware BIOS Virus protection
|
| |
Management |
| Software | - Optional IPMI (Intelligent Platform Management Interface) 2.0
- Super Doctor III
|
| Power Configurations | - ACPI Power Management
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Main Switch Override Mechanism
- Power-on mode control for AC power loss recovery
- Internal/External modem remote ring-on
|
| |
PC Health Monitoring |
| CPU | - Monitors CPU Core Voltages, +3.3V, +5V, +12V, 5V Standby, VBAT
- Monitor for HyperTransport voltage 1.2V, DDR termination 1.25V
- CPU switching voltage regulator
|
| FAN | - Total up to five 3-pin fan headers
- 5 Fan Status Tachometer monitoring
- Status Monitor for Speed Control
|
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- I²C temperature sensing logic
|
| LED | - CPU / Overheat LED
- Supsend-State Indicator LED
- +5 V Standby Alert LED
|
| Other Features | - Chassis Intrusion Header
- Chassis Intrusion Detection
- Chipkill Support
|
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant 6/6, Pb Free |
| Environmental Specifications | - Operating Temperature: 10?to 35?C (50?to 95?F)
- Non-operating Temperature: -40?to 70?C (-40?to 158?F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5 to 95% (non-condensing)
|
| |
OS compatibility |
| Please see our OS Compatibility Chart |
| |
Regulatory |
| FCC | Passed to meet FCC standard requirement |
0 Artikel
