|
Product SKUs |
MBD-H8SGL-F | H8SGL-F (Standard Retail Pack) |
|
Physical Stats |
Form Factor | ATX Form |
Dimensions | 12" x 8" (30.5cm x 20.3cm) |
|
Processor/Chipset |
CPU | - Single 1944-pin Socket G34
- Supports one 16/12/8/4-Core ready AMD Opteron™ 6000 Series processors
- HT3.0 Link support
|
Chipset | AMD chipset SR5650 + SP5100 |
|
System Memory |
Memory Capacity | - Eight DIMM sockets
- Supports up to 256GB Registered ECC or 64GB Unbuffered ECC/non-ECC DDR3 1600/1333/1066 SDRAM in 8 DIMMs
- Quad channel memory bus
- See Detailed Memory Support Matrix
|
Memory Type | DDR3 1600/1333/1066 MHz Registered ECC SDRAM or Unbuffered ECC/non-ECC 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes | 1GB, 2GB, 4GB, 8GB, 16GB, 32GB |
Memory Voltage | 1.35V or 1.5V |
Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
|
On-Board Devices |
SATA | AMD SP5100 (RAID 0, 1, 10) |
IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Winbond® WPCM450 BMC
|
Network Controllers | - Two Intel® 82574L controller, Dual-Port Gigabit Ethernet
- 10/100/1000BASE-T support
|
VGA | Matrox G200 16MB DDR2 |
Super I/O | Winbond® W83527 chip |
|
Input / Output |
SATA | 6x SATA2.0 (3Gb/s) Ports |
LAN | - 2 RJ45 LAN ports
- 1 RJ45 Dedicated LAN supports IPMI
|
USB | - 8x USB 2.0 ports
- 2x Rear, 2x header(4x ports), and 2x TypeA
|
VGA | 1x VGA port |
Keyboard / Mouse | PS/2 keyboard and mouse ports |
Serial Ports | - 1x Fast UART 16550 serial port
- 1x serial port header
|
Others | 1 SATA DOM power connector, TPM header |
|
Expansion Slots |
PCI-E/PCI | - 1 PCI-E 2.0 x8 (in x16 slot)
- 1 PCI-E 2.0 x8
- 1 PCI-E 2.0 x4 (in x8 slot)
- 3 PCI
|
|
Chassis ( Optimized for H8SGL-F ) |
1U Chassis | - CSE-512F-350B
- CSE-811T-260
- CSE-811T-300
- CSE-813MTQ-350C
|
Mid-Tower | - CSE-733E-500B
- CSE-733i-500B
- CSE-733T-500B
- CSE-733TQ-500B
|
|
System BIOS |
BIOS Type | 16Mb SPI Flash ROM with AMI® BIOS |
BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- USB Keyboard Support
- SMBIOS 2.3
|
|
Management |
Software | - IPMI (Intelligent Platform Management Interface) 2.0
- Super Doctor III
|
Power Configurations | - ACPI Power Management
- Wake-On-LAN (WOL) header
- Keyboard wakeup from soft-off
- Power-on mode control for AC power loss recovery
|
|
PC Health Monitoring |
CPU | - Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, VBAT, HT, memory, chipset
- CPU switching voltage regulator
|
FAN | - Up to 6-fan status tachometer monitoring
- Up to six 4-pin fan headers
- Status monitor for speed control
- 3-pin fan support (w/o speed control)
- Low noise fan speed control (4-pin fan only)
- Pulse Width Modulated (PWM) fan connectors
|
Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal control for 6x Fan connectors
- I²C temperature sensing logic
|
LED | - CPU / System Overheat LED
- +5 V Standby Alert LED
|
Other Features | - Chassis Intrusion Detection
- Chassis Intrusion Header
|
|
Operating Environment / Compliance |
RoHS | RoHS Compliant 6/6, Pb Free |
Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|
|
OS compatibility |
Please see our OS Compatibility Chart |
|
Regulatory |
FCC | Passed to meet FCC standard requirement |