| |
Product SKUs |
| MBD-H8SCM-F | H8SCM-F (Standard Retail Pack) |
| |
Physical Stats |
| Form Factor | Micro ATX Form |
| Dimensions | 9.6" x 8.6" (24.4cm x 21.8cm) |
| |
Processor/Chipset |
| CPU | - Single 1207-pin Socket C32
- Supports one 8/6/4-Core ready AMD Opteron™ 4000 Series processors
|
| Chipset | AMD chipset SR5650/SP5100 |
| |
System Memory |
| Memory Capacity | - Four DIMM sockets
- Supports up to 128GB Registered ECC or 32GB Unbuffered ECC/non-ECC DDR3 1600/1333/1066 SDRAM in 4 DIMMs
- Dual channel memory bus
- See Detailed Memory Support Matrix
|
| Memory Type | DDR3 1600/1333/1066 MHz Registered ECC SDRAM or Unbuffered ECC/non-ECC 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 1GB, 2GB, 4GB, 8GB, 16GB, 32GB |
| Memory Voltage | 1.35V or 1.5V |
| |
On-Board Devices |
| SATA | AMD SP5100 (RAID 0, 1, 10) |
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Winbond® WPCM450 BMC
|
| Network Controllers | - Two Intel® 82574L controllers
- Two single-port Gigabit Ethernet
- 10/100/1000BASE-T support
|
| VGA | Matrox G200eW 16MB DDR2 |
| Super I/O | Winbond® W83527HG chip |
| |
Input / Output |
| SATA | 6x SATA (3Gb/s) Ports |
| USB | - 7x USB 2.0 ports
- 2x Rear, 2x header (4 ports), 1x Type A
|
| VGA | 1x VGA port |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Ports | - 2x Fast UART 16550 serial port
- (one header & one port)
|
| Others | 1 SATA DOM power connector, TPM header |
| |
Expansion Slots |
| PCI-E/PCI | - 1 PCI-E 2.0 x8 (in x16 slot)
- 1 PCI-E 2.0 x8
- 1 PCI-E 2.0 x4 (in x8 slot)
- 1 PCI
|
| |
Chassis ( Optimized for H8SCM-F ) |
| 1U Chassis | - CSE-113MTQ-563CB
- CSE-512F-350B
- CSE-813MTQ-350C
|
| 2U Chassis | CSE-213LT-563LPB |
| 1U | SC512, SC513, SC811, SC813M, SC111, SC113M |
| Mid-Tower | SC731, SC733 |
| |
Server(s) ( with H8SCM-F ) |
| Model(s) | AS -1012C-MRF |
| |
System BIOS |
| BIOS Type | 16Mb SPI Flash ROM with AMI® BIOS |
| BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- USB Keyboard Support
- SMBIOS 2.3
|
| |
Management |
| Software | Super Doctor III |
| Power Configurations | - ACPI Power Management
- Wake-On-LAN (WOL) header
- Keyboard wakeup from soft-off
- Power-on mode control for AC power loss recovery
|
| |
PC Health Monitoring |
| CPU | - Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, VBAT, HT, memory, chipset
- CPU switching voltage regulator
|
| FAN | - Up to 5-fan status tachometer monitoring
- Up to five 4-pin fan headers
- Status monitor for speed control
- 3-pin fan support (w/o speed control)
- Low noise fan speed control (4-pin fan only)
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal control for 8x Fan connectors
- I²C temperature sensing logic
|
| LED | - CPU / System Overheat LED
- +5 V Standby Alert LED
|
| Other Features | - Chassis Intrusion Detection
- Chassis Intrusion Header
|
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant 6/6, Pb Free |
| Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|
| |
OS compatibility |
| Please see our OS Compatibility Chart |
| |
Regulatory |
| FCC | Passed to meet FCC standard requirement |
0 Artikel
