| |
Product SKUs
- Discontinued SKU. Please contact sales-rep for possible OEM production quantities. MOQ may apply |
| MBD-H8QMi-2-O | H8QMi-2 (Standard Retail Pack) |
| MBD-H8QMi-2-B | H8QMi-2 (Bulk Pack) |
| |
Physical Stats |
| Form Factor | Proprietary |
| Dimensions | 16.4" x 13" (41.7cm x 33.0cm) |
| |
Processor/Chipset |
| CPU | - Quad 1207-pin Socket F
- Supports up to four Six-Core / Quad-Core / Dual-Core AMD Opteron™ 8000 Series processors
- HT3.0 Link support ^
|
| Chipset | - nVidia MCP55 Pro
- IO 55
- NEC uPD720400
|
| |
System Memory |
| Memory Capacity | - 32x 240-pin DIMM sockets support up to 256GB DDR2 800/667/533 MHz memory *
- Single or Dual (recommended) channel memory support
- For Quad CPUs: Recommended that memory be populated equally in adjacent memory banks
|
| Memory Type | DDR2 800/667/533MHz Reg. ECC SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 256MB, 512MB, 1GB, 2GB, 4GB, 8GB |
| Memory Voltage | 1.8 V only |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
On-Board Devices |
| SATA | - nVidia MCP55 Pro SATA2 3.0Gbps Controller
- 6 SATA2 Ports
- nVidia RAID 2.0
- SATA RAID 0, 1, 0+1, 5 JBOD Support
|
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- 200-pin IPMI slot
- (Optional: AOC-SIM1U(+) R 3.00)
- (Optional: AOC-SIMLC(+) R 3.00)
- RMM (Remote Management Module)
- (Card not included)
- Note: KVM-over-LAN is available on AOC-SIM1U+ only and dedicated LAN is required
|
| Network Controllers | - Intel® 82546GB Dual Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
|
| Super I/O | Winbond 83627HG |
| VGA | - ATI ES1000 Graphics Controller
- 16MB Graphics & VGA port
|
| |
System BIOS |
| BIOS Type | - 8Mb Flash EEPROM with AMI BIOS
- SST 49LF080A BIOS Chip
|
| BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0/1.0
- USB Keyboard Support
- SMBIOS 2.3
|
| |
Expansion Slots |
| PCI-Express | - 2 x16 PCI-e Slots
- 1x (x8) PCI-e Slot
- 1 x4 PCI-e Slot (Using x8 Slot)
|
| PCI-X | 1 64-bit 133 MHz PCI-X (3.3V) slots |
| |
Chassis ( Optimized for H8QMi-2 ) |
| 1U Chassis | CSE-818TQ+-1000B |
| Tower / 4 U Rackmount | - CSE-748TQ-R1400B
- Required: Heat sink (SNK-P0023P+) & Airshroud (MCP-310-74802-0B)
|
| Important Chassis Notes | To ensure system stability, a 1200W (minimum) ATX power supply [ 8-pin & 8-pin (+12V) and 24-pin are required] |
| |
Input / Output |
| SATA | 6 SATA2 ports |
| IDE | - Single EIDE channel support up to two UDMA IDE devices
- Supports UDMA Mode 5
- Supports PIO Mode 4
- Supports ATA 100 / 133
|
| Floppy | 1 Floppy port; 1.44 MB support |
| LAN | 2 RJ45 LAN ports |
| USB | - Up to 4 USB Ports 2.0/1.1 Compliant
- 2 Rear Ports
- 2 Internal Headers
|
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Ports | - 1x Fast UART 16550 serial port
- 1x Header
|
| VGA | 1x VGA port |
| Others | 1 SATA DOM power connector |
| |
Management |
| Software | - Optional IPMI (Intelligent Platform Management Interface) 2.0
- Super Doctor III
- Watch Dog
|
| Power Configurations | - ACPI Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) headert
- Wake-On-LAN (WOL) header
- Keyboard wakeup from soft-off
- Power-on mode control for AC power loss recovery
- Internal/External modem remote ring-on
|
| |
PC Health Monitoring |
| CPU | - Monitors CPU Core Voltages, +3.3V, +5V, +12V, +5V Standby, VBAT.
- CPU switching voltage regulator
|
| FAN | - Total up to 9-fan status tachometer monitoring
- Up to nine 3-pin fan headers
- Status monitor for speed control
- Support 3-pin fans with fan-speed control
- Low noise fan speed control
|
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- PC Temperature Sensing Logic
|
| LED | - CPU / System Overheat LED
- +5 V Standby Alert LED
|
| Other Features | - Chassis Intrusion Detection
- Chassis Intrusion Header
|
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant 5/6, Server Exemption |
| Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|
| |
OS compatibility |
| Please see our OS Compatibility Chart |
| |
Regulatory |
| FCC | Passed to meet FCC standard requirement |
0 Artikel
