|
Product SKUs |
MBD-H8QIi+-F-O | H8QIi+-F (Standard Retail Pack) |
MBD-H8QIi+-F-B | H8QIi+-F (Bulk Pack) |
|
Physical Stats |
Form Factor | Proprietary |
Dimensions | 16.4" x 13" (41.7cm x 33.0cm) |
|
Processor/Chipset |
CPU | - Quad 1207-pin Socket F
- Supports up to four Six-Core / Quad-Core AMD Opteron™ 8000 Series processors**
- HT3.0 Link support
|
Chipset | AMD SR5690 + SP5100 Chipset |
|
System Memory |
Memory Capacity | - Sixteen 240-pin DIMM sockets
- Support up to 128GB memory
- Dual channel memory bus; Single or Dual (recommended) channel memory support
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
|
Memory Type | DDR2 800/667/533 MHz Registered ECC SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes | 256 MB, 512 MB, 1GB, 2GB, 4GB, 8GB |
Memory Voltage | 1.8 V only |
|
On-Board Devices |
SATA | AMD SP5100 (RAID 0, 1, 10) |
IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Winbond® WPCM450 BMC
|
Network Controllers | - Intel® 82576 controller, Dual-Port Gigabit Ethernet
- 10/100/1000BASE-T support
|
VGA | Matrox G200eW 16MB DDR2 graphics |
Super I/O | Winbond® 83627DHG chip |
|
Input / Output |
SATA | 6x SATA2.0 (3Gb/s) Ports |
IDE | - Single EIDE channel support up to two UDMA IDE devices
- Supports UDMA Mode 5
- Supports PIO Mode 4
- Supports ATA 100/133
|
LAN | - 2 RJ45 LAN ports
- 1 RJ45 Dedicated LAN supports IPMI
|
USB | - 6x USB 2.0 ports
- 2x Rear / 2x header / 2x type A
|
VGA | 1x VGA port |
Keyboard / Mouse | PS/2 keyboard and mouse ports |
Serial Ports | - 1x Fast UART 16550 serial port
- 1x serial port header
|
Others | 1 SATA DOM power connector |
|
Expansion Slots |
PCI-Express | 1x PCI-e 2.0 x16 |
|
Chassis ( Optimized for H8QIi+-F ) |
1U Chassis | - CSE-818TQ-1400B
- (with SNK-P0022+)
|
2U Chassis | CSE-828TQ+-R1400LPB |
Tower / 4 U Rackmount | CSE-748TQ-R1400B |
|
Server(s) ( with H8QIi+-F ) |
Model(s) | AS -1041A-T2F |
|
System BIOS |
BIOS Type | 16Mb SPI Flash ROM with AMI® BIOS |
BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- USB Keyboard Support
- SMBIOS 2.3
|
|
Management |
Software | - IPMI (Intelligent Platform Management Interface) 2.0
- Super Doctor III
|
Power Configurations | - ACPI Power Management
- Wake-On-LAN (WOL) header
- Keyboard wakeup from soft-off
- Power-on mode control for AC power loss recovery
|
|
PC Health Monitoring |
CPU | - Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, VBAT, HT, memory, chipset
- CPU switching voltage regulator
|
FAN | - Up to 9-fan status tachometer monitoring
- Up to nine 4-pin fan headers
- Status monitor for speed control
- 3-pin fan support (w/o speed control)
- Low noise fan speed control (4-pin fan only)
- Pulse Width Modulated (PWM) fan connectors
|
Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- I²C temperature sensing logic
|
LED | - CPU / System Overheat LED
- +5 V Standby Alert LED
|
Other Features | - Chassis Intrusion Detection
- Chassis Intrusion Header
|
|
Operating Environment / Compliance |
RoHS | RoHS Compliant 5/6, Server Exemption |
Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|
|
OS compatibility |
Please see our OS Compatibility Chart |
|
Regulatory |
FCC | Passed to meet FCC standard requirement |