| |
Product SKUs |
| MBD-H8QGL-6F | H8QGL-6F (Standard Retail Pack) |
| |
Physical Stats |
| Form Factor | SWTX |
| Dimensions | 16.48" x 13" (41.9cm x 33.0cm) |
| |
Processor/Chipset |
| CPU | - Quad 1944-pin Socket G34
- Supports up to four 16/12/8/4-Core ready AMD Opteron™ 6000 Series processors
- HT3.0 Link support
|
| Chipset | Dual AMD SR5690 and SP5100 |
| |
System Memory |
| Memory Capacity | - 16 DIMM sockets
- Supprots up to 512GB Registered ECC or 128GB Unbuffered ECC/non-ECC DDR3 1866/1600/1333/1066 SDRAM in 16 DIMMs
- Quad channel memory bus
- See Detailed Memory Support Matrix
|
| Memory Type | DDR3 1866/1600/1333/1066 MHz Registered ECC SDRAM or Unbuffered ECC/non-ECC 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 1GB, 2GB, 4GB, 8GB, 16GB, 32GB |
| Memory Voltage | 1.35V or 1.5V |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
On-Board Devices |
| SATA | AMD SP5100 (RAID 0, 1, 10) |
| SAS | - LSI 2008 8 port SAS controller
- RAID 0, 1, 10; RAID 5 Optional
- Optional: AOC-SAS2-RAID5-KEY RAID 5 support
|
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Winbond® WPCM+450 BMC
|
| Network Controllers | - Intel® 82576 dual-port Gigabit Ethernet LAN
- 10/100/1000BASE-T support
|
| VGA | Matrox G200eW 16MB DDR2 |
| Super I/O | Winbond® W83527 chip |
| |
Input / Output |
| SATA | 6x SATA2.0 (3Gb/s) Ports |
| SAS | - Integrated LSI 2008 SAS2 Controller
- Eight Serial Attached SCSI (SAS) ports
- Each SAS port supports up to 4 SAS / SATA drives
|
| LAN | - 2 RJ45 LAN ports
- 1 RJ45 Dedicated LAN supports IPMI
|
| USB | - 7x USB 2.0 ports
- 2x Rear, 2x header-4x ports, and 1x TypeA
|
| VGA | 1x VGA port |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Ports | - 1x Fast UART 16550 serial port
- 1x serial port header
|
| Others | 1 SATA DOM power connector, TPM header |
| |
Expansion Slots |
| PCI-E/PCI | - 3 PCI-E 2.0 x16
- 2 PCI-E 2.0 x8 (in x16 slots)
- 1x PCI-E 2.0 x4 (in x16 slot)
|
| |
Chassis ( Optimized for H8QGL-6F ) |
| 1U Chassis | CSE-818TQ-1400B Requires rev. K chassis, air shroud MCP-310-81808-0B* |
| 2U Chassis | - CSE-828TQ+-R1400LPB Requires rev. K chassis, air shroud MCP-310-82801-0N*
- CSE-828TQ+-R1K43LPB Requires rev. K chassis, air shroud MCP-310-82801-0N*
|
| Tower / 4 U Rackmount | - CSE-418E16-R1K62B Requires air shroud MCP-310-84802-0B*
- CSE-748TQ-R1400B Requires rev. K chassis, air shroud MCP-310-74802-0B*
- CSE-848A-R1K62B Requires air shroud MCP-310-84802-0B*
- CSE-848E16-R1K62B Requires air shroud MCP-310-84802-0B*
|
| Note | * Sold separately, please refer to the chassis web spec for the air shroud info in the optional part list. |
| |
System BIOS |
| BIOS Type | 16Mb SPI Flash ROM with AMI® BIOS |
| BIOS Features | - Plug and Play (PnP)
- APM 1.2
- DMI 2.3
- PCI 2.2
- ACPI 1.0/2.0
- USB Keyboard Support
- SMBIOS 2.3
- Real Time Clock Wakeup
|
| |
Management |
| Software | - IPMI (Intelligent Platform Management Interface) 2.0
- Super Doctor III
|
| Power Configurations | - ACPI Power Management
- Wake-On-LAN (WOL) header
- Keyboard wakeup from soft-off
- Power-on mode control for AC power loss recovery
|
| |
PC Health Monitoring |
| CPU | - Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, VBAT, HT, memory, chipset
- CPU switching voltage regulator
|
| FAN | - Up to 9-fan status tachometer monitoring
- Up to nine 4-pin fan headers
- Status monitor for speed & on/off control
- 3-pin fan support (w/o speed control)
- Low noise fan speed control (4-pin fan only)
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal control for 9x Fan connectors
- I²C temperature sensing logic
|
| LED | - CPU / System Overheat
- Suspend-state indicator
- +5V Standby Alert
- UID/Remote UID
|
| Other Features | - Chassis Intrusion Detection
- Chassis Intrusion Header
|
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant 6/6, Pb Free |
| Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|
| |
OS compatibility |
| Please see our OS Compatibility Chart |
| |
Regulatory |
| FCC | Passed to meet FCC standard requirement |
0 Artikel
