|
Product SKUs |
MBD-H8DMi-2-O | H8DMi-2 (Standard Retail Pack) |
MBD-H8DMi-2-B | H8DMi-2 (Bulk Pack) |
|
Physical Stats |
Form Factor | Extended ATX |
Dimensions | 12" x 13.05" (30.5cm x 33.2cm) |
|
Processor/Chipset |
CPU | - Dual 1207-pin Socket F
- Supports up to two Six-Core / Quad-Core / Dual-Core AMD Opteron™ 2000 Series processors
- HT3.0 Link support ^
|
Chipset | |
|
System Memory |
Memory Capacity | - Eight 240-pin DIMM sockets
- Supports up to 64 GB DDR2 800/667/533 MHz memory
- For Single CPU: Memory must be populated in CPU1 DIMMs only
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
- Dual channel memory bus
|
Memory Type | DDR2 800/667/533 MHz ECC, reg. ECC SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes | 256 MB, 512 MB, 1GB, 2GB, 4GB, 8GB |
Memory Voltage | 1.8 V only |
|
On-Board Devices |
SATA | - nVidia MCP55 Pro SATA2 3.0Gbps Controller
- 6 SATA2 Ports
- nVidia RAID 2.0
- SATA RAID 0, 1, 0+1, 5 JBOD Support
|
IPMI | - Support for Intelligent Platform Management Interface v.2.0
- 200-pin IPMI slot (SIMLP)
- (Optional: AOC-SIMLP-B(+) R 3.00)
- (Optional: AOC-SIMLP-3(+) R 3.00) with 3rd LAN support
- RMM (Remote Management Module)
- (Card not included)
|
Network Controllers | - nVidia MCP55 Pro Chipset Dual-port LAN / Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
|
VGA | - ATI ES1000 Graphics Controller
- 16MB Graphics & VGA port
|
Super I/O | Winbond 83627HF |
|
Input / Output |
SATA | 6 SATA2 ports |
IDE | - Single EIDE channel support up to two UDMA IDE devices
- Supports UDMA Mode 5
- Supports PIO Mode 4
- Supports ATA 100/133
|
Floppy | 1 Floppy port; 1.44 MB support |
LAN | 2 RJ45 LAN ports |
USB | - Up to 6 USB Ports 2.0 Compliant, 1.1 Compatible
- 2 Rear Ports
- 4 Internal Headers
|
VGA | 1x VGA port |
Keyboard / Mouse | PS/2 keyboard and mouse ports |
Serial Ports | - 1x Fast UART 16550 serial port
- 1 serial port header
|
Parallel Port | 1 ECP / EPP parallel port |
Others | 1 SATA DOM power connector |
|
Expansion Slots |
PCI-Express | - 2 x8 PCI-e slots
- 1 x4 PCI-e (in a x8 physical slot)
- 1 SEPC (Supermicro extended Power Connector) slot for 2U active riser cards w/ a power extension (i.e. CSE-RR2UE-AX)
|
PCI-X | - 1 64-bit 133MHz PCI-X (3.3V) slots
- 2 64-bit 133/100MHz PCI-X (3.3V) slots
|
IPMI | IPMI 2.0 expansion slot |
|
Chassis ( Optimized for H8DMi-2 ) |
2U Chassis | - CSE-213A-R900LPB
- CSE-216A-R900LPB
- CSE-825TQ-R700LPB
|
Tower / 4 U Rackmount | CSE-745TQ-R800B |
Important Chassis Notes | To ensure system stability, a 550W (minimum) ATX power supply [ 4-pin (+12V), 8-pin (+12V) and 24-pin are required] |
|
System BIOS |
BIOS Type | 8Mb Flash EEPROM with AMI BIOS |
BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- USB Keyboard Support
- SMBIOS 2.3
|
|
Management |
Software | - Optional IPMI (Intelligent Platform Management Interface) 2.0
- Super Doctor III
- Watch Dog
|
Power Configurations | - ACPI Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) headert
- Wake-On-LAN (WOL) header
- Keyboard wakeup from soft-off
- Power-on mode control for AC power loss recovery
- Internal/External modem remote ring-on
|
|
PC Health Monitoring |
CPU | - Monitors CPU Core Voltages, +3.3V, +5V, ±12V, 5V Standby, VBAT
- CPU switching voltage regulator
|
FAN | - Up to 8-fan status tachometer monitoring
- Up to six 3-pin & two 4-pin fan headers
- Status monitor for speed control
- 3-pin fan support
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- I²C temperature sensing logic
|
LED | - CPU / System Overheat LED
- +5 V Standby Alert LED
|
Other Features | - Chassis Intrusion Detection
- Chassis Intrusion Header
- Chipkill Support
|
|
Operating Environment / Compliance |
RoHS | RoHS Compliant 5/6, Server Exemption |
Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|
|
Regulatory |
FCC | Passed to meet FCC standard requirement |