|
Product SKUs |
MBD-H8DCL-iF | H8DCL-iF (Standard Retail Pack) |
|
Physical Stats |
Form Factor | ATX |
Dimensions | 12" x 10" |
|
Processor/Chipset |
CPU | - Dual 1207-pin Socket C32
- Supports two 8/6/4-Core ready AMD Opteron™ 4000 Series processors
- HT3.0 Link support
|
Chipset | AMD chipset SR5690 + SP5100 |
|
System Memory |
Memory Capacity | - 8 DIMM sockets
- Supports up to 256GB Registered ECC or 64GB Unbuffered ECC/non-ECC DDR3 1600/1333/1066 SDRAM in 8 DIMMs
- Dual channel memory bus
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
- See Detailed Memory Support Matrix
|
Memory Type | Registered ECC or unb. ECC / non-ECC DDR3 1600/1333/1066 MHz SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes | 1GB, 2GB, 4GB, 8GB, 16GB, 32GB |
Memory Voltage | 1.35V or 1.5V |
|
On-Board Devices |
SATA | AMD SP5100 (RAID 0, 1, 10) |
SAS | - LSI 2008 8 port SAS controller
- RAID 0, 1, 10; RAID 5 Optional
- Optional: AOC-SAS2-RAID5-KEYRAID 5 support
|
IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Winbond® WPCM450 BMC
|
Network Controllers | - 2 Intel® 82574L single-port Gigabit Ethernet Controllers
- 10/100/1000BASE-T support
|
VGA | Matrox G200eW 16MB DDR2 |
Super I/O | Winbond® W83527 chip |
|
Input / Output |
SATA | 6x SATA (3Gb/s) ports |
SAS | - Integrated LSI 1068E SAS Controller
- Eight Serial Attached SCSI (SAS) ports
- Each SAS port supports up to 4 SAS / SATA drives
|
LAN | - 2 RJ45 LAN ports
- 1 RJ45 Dedicated LAN supports IPMI
|
USB | - 7x USB 2.0 ports
- 2 rear, 1 Type-A, 2 headers for 4 ports
|
VGA | 1x VGA port |
Serial Ports | 2x Fast UART 16550 serial port (one header & one port) |
Power | - SSI 24-pin + 8-pin + 8-pin power connectors / EPS12V
- Note: Two 8-pin connectors are required to support 2 CPUs due to SSI spec
|
Others | 1 SATA DOM power connector, TPM header |
|
Expansion Slots |
PCI-E | - 1 PCI-E 2.0 x8 (in x16 slot)
- 3 PCI-E 2.0 x8
- 1 PCI-E 2.0 x4 (in x8 slot)
- 1 PCI
|
|
Chassis (Optimized for H8DCL-iF ) |
3U/Mid Tower | - CSE-835TQ-R920B
- CSE-936A-R900B
- CSE-936A-R1200B
- CSE-732i-500B
|
Tower/4U Rackmount | - CSE-743TQ-865B
- CSE-743TQ-865B-SQ
- CSE-743TQ-R760
- CSE-745TQ-800B
- CSE-745TQ-920B
- CSE-745TQ-R800B
- CSE-842TQ-665B
- CSE-846A-R1200B
- CSE-846E1-R900B
- CSE-846E16-R1200B
- CSE-846E2-R900
- CSE-846E26-R1200B
|
|
System BIOS |
BIOS Type | 16Mb SPI Flash ROM with AMI® BIOS |
BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- USB Keyboard Support
- SMBIOS 2.3
|
|
Management |
Software | - IPMI (Intelligent Platform Management Interface) 2.0
- Super Doctor III
|
Power Configurations | - ACPI Power Management
- Wake-On-LAN (WOL) header
- Keyboard wakeup from soft-off
- Power-on mode control for AC power loss recovery
|
|
PC Health Monitoring |
CPU | - Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, VBAT, HT, memory, chipset
- CPU switching voltage regulator
|
FAN | - Up to 6-fan status tachometer monitoring
- Up to 6x 4-pin fan headers
- Status monitor for speed control
- 4-pin fan support (w/o speed control)
- Low noise fan speed control (4-pin fan only)
- Pulse Width Modulated (PWM) fan connectors
|
Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal control for 8x Fan connectors
- I²C temperature sensing logic
|
LED | - CPU / System Overheat LED
- +5 V Standby Alert LED
|
Other Features | - Chassis Intrusion Detection
- Chassis Intrusion Header
|
|
Operating Environment / Compliance |
RoHS | RoHS Compliant 5/6, Pb Free |
Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|
|
OS compatibility |
Please see our OS Compatibility Chart |
|
Regulatory |
FCC | Passed to meet FCC standard requirement |