|
Product SKUs |
MBD-H8DCi-B | H8DCi (Bulk Pack) |
|
Physical Stats |
Form Factor | Extended ATX |
Dimensions | 12" x 13.05" (30.5cm x 33.2cm) |
|
Processor/Chipset |
CPU | - Dual 940-pin ZIF Sockets
- Supports up to two Dual-Core AMD Opteron™200 Series processor(s)
- Single CPU configurations are not recommended
- VRM x3
|
Chipset | - nVidia nForce Pro 2200 (CK804)
- nVidia nForce Pro 2050 (CKIO4)
- AMD 8132 PCI-X Tunnel
|
|
System Memory |
Memory Capacity | - Eight 184-pin DIMM sockets support:
- Up to 16 GB DDR 400 MHz memory OR
- Up to 32 GB DDR 333/266 MHz memory
- Single or Dual (recommended) channel memory support
- For Single CPU: Memory must be populated in CPU1 DIMMs only
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
|
Memory Type | DDR 400/333/266MHz buffered (registered) ECC SDRAM 72-bit, 184-pin gold-plated DIMMs |
DIMM Sizes | 256 MB, 512 MB, 1 GB, 2 GB, 4 GB** |
Memory Voltage | 2.5 V only |
Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
|
On-Board Devices |
SATA | - nVidia nForce Pro 2200 SATA 3.0Gbps Controller
- 4 SATA Ports
- nVidia RAID 2.0
- SATA RAID 0, 1, 0+1 support
|
Network Controllers | - nVidia nForce Pro 2200(CKIO4) & 2050(IO4) Dual Single-Port Gigabit Ethernet Controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
|
Audio | - AC97 (ALC650) audio CODEC with high quality 6-channel sound
- Front-side audio header
|
Clock Generator | CK804 |
|
Input / Output |
Serial ATA | - Integrated SATA 3.0Gbps Controller
- Four Serial ATA Connectors
- Four SATA hard drives supported
|
IDE | Dual ATA 133/100 EIDE channels support up to four UDMA IDE devices |
Floppy | 1 Floppy port; 1.44 MB, 2.88 MB, 3-mode support |
LAN | 2 RJ45 LAN ports |
USB | - FUCI
- Up to 8 USB Ports 2.0 Compliant, 1.1 Compatible
- 4 rear ports
- 4 internal headers
|
Audio | 1 Line In / Line Out / Microphone port |
Keyboard / Mouse | PS/2 keyboard and mouse ports |
Serial Ports | 2x Fast UART 16550 serial ports |
Parallel Ports | 1 ECP / EPP parallel port |
|
Chassis ( Optimized for H8DCi) |
4U Chassis | - SC743T-645
- SC743i-645
- SC743T-R760
- SC743i-R760
|
Important Chassis Notes | To ensure system stability, a 645W (minimum) ATX power supply [4-pin (+12V), 8-pin (+12V) and 24-pin are required] |
|
Expansion Slots |
PCI-Express | - 2 PCI-e x16 slots(nVidia SLI Technology Supported)
- 1 PCI-e x4 (using x8) slot
|
PCI-X | - 2 64-bit PCI-X 133/100MHz slots
- 1 64-bit PCI-X 100MHz slot
- Note: Dual Processors are required for correct PCI-X expansion slot operation
|
PCI | 1x 32-bit PCI slot |
|
System BIOS |
BIOS Type | - 8Mb Flash EEPROM with AMI BIOS
- SST49LF080A BIOS Chip
|
BIOS Features | - Plug and Play (PnP)
- ACPI 2.0
- PCI 2.2
- DMI 2.3
- USB Legacy Support
- Real Time Clock (RTC) Wake-Up
|
|
Management |
Software | - Super Doctor III
- Watch Dog / NMI
|
Power Configurations | - ACPI/API Power Management
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Power-on mode control for AC power loss recovery
- Internal/External modem remote ring-on
|
|
PC Health Monitoring |
CPU | - Monitors CPU Core Voltages +3.3V, +5V, ±12V & 3.3V Standby
- HyperTransport Link voltage 1.2V, memory voltage 2.5V, nVidia nForce Pro 2200 & 2050 voltage 1.5V
- Up to 8 fan status
- Supports System Management Utility
- S3 Suspend To RAM (STR)
|
FAN | - Total up to eight 4-pin fan status
- 8 Tachometer Monitoring
- Status Monitor for On/Off Control
- Supports 3-pin fans (without speed control)
- Low Noise Fan Speed Control
- Pulse Width Modulated (PWM) fan connector
|
Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- I²C temperature sensing logic
|
LED | - CPU / System Overheat LED
- Suspend-State Indicator LED
- +5 V Standby Alert LED
|
Other Features | - Chassis Intrusion Header
- Chassis Intrusion Detection
|
|
Operating Environment / Compliance |
RoHS | RoHS Compliant Version Available, Revision 3.xx or later |
|
OS compatibility |
Please see our OS Compatibility Chart |
|
Regulatory |
FCC | Class B |