|
Product SKUs |
MBD-H8DCE-B | H8DCE (Bulk Pack) |
|
Physical Stats |
Form Factor | Extended ATX |
Dimensions | 12" x 13.05" (30.5cm x 33.2cm) |
|
Processor/Chipset |
CPU | - Dual 940-pin ZIF Sockets
- Supports up to two Dual-Core AMD Opteron™ 200 Series processor(s)
- VRM x3
|
Chipset | - nVidia nForce Pro 2200 (CK804)
- nVidia nForce Pro 2050 (CKIO4)
|
|
System Memory |
Memory Capacity | - Eight 184-pin DIMM sockets support:
- Up to 16 GB DDR 400 MHz memory OR
- Up to 16 GB DDR 333 MHz memory OR
- Up to 32 GB DDR 266 MHz memory
- Single or Dual (recommended) channel memory support
- For Single CPU: Memory must be populated in CPU1 DIMMs only
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
|
Memory Type | DDR 400/333/266MHz buffered (registered) ECC SDRAM 72-bit, 184-pin gold-plated DIMMs |
DIMM Sizes | 256 MB, 512 MB, 1 GB, 2 GB, 4 GB** |
Memory Voltage | 2.5 V only |
Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
|
On-Board Devices |
SATA | - nVidia nForce Pro 2200 SATA 3.0Gbps Controller
- nVidia nForce Pro 2050 SATA 3.0Gbps Controller
- 8 SATA Ports
- nVidia RAID 2.0
- SATA RAID 0, 1, 0+1 support
|
Network Controllers | - nVidia nForce Pro 2200 & 2050 Dual Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
|
Audio | - AC97 audio CODEC with high quality 6-channel sound
- Front-side audio header
|
|
System BIOS |
BIOS Type | 4Mb Flash EEPROM with AMI® BIOS |
BIOS Features | - Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.3
- ACPI 2.0
- Fan Speed Control
|
|
Expansion Slots |
PCI-Express | - 2 PCI-e x16 slots(nVidia SLI Technology Supported)
- 2 PCI-e x4 (using x8) slots
|
PCI | 3 32-bit PCI slots |
|
Chassis ( Optimized for H8DCE ) |
4U Chassis | SC743T-645 |
Important Chassis Notes | To ensure system stability, a 645W (minimum) ATX power supply [4-pin (+12V), 8-pin (+12V) and 24-pin are required] |
|
Input / Output |
Serial ATA | - Integrated SATA 3.0Gbps Controller
- Eight Serial ATA Connectors
- Eight SATA hard drives supported
|
IDE | Dual ATA 133/100 EIDE channels support up to four UDMA IDE devices |
Floppy | 1 Floppy port; 1.44 MB, 2.88 MB, 3-mode support |
LAN | 2 RJ45 LAN ports |
USB | - FUCI
- Up to 8 USB Ports 2.0 Compliant, 1.1 Compatible
|
Audio | 1 Line In / Line Out / Microphone ports |
Keyboard / Mouse | PS/2 keyboard and mouse ports |
Serial Ports | 2x Fast UART 16550 serial ports |
Parallel Ports | 1 ECP / EPP parallel port |
|
Management |
Software | - Super Doctor III
- Watch Dog
|
Power Configurations | - ACPI/API Power Management
- Wake-On-LAN (WOL) header
- Power-on mode control for AC power loss recovery
- Internal/External modem remote ring-on
|
|
PC Health Monitoring |
CPU | - Monitors CPU Core Voltages, +3.3V, +5V, ±12V & +3.3V Standby, HyperTransport Link voltage 1.2V, memory voltage 2.5V, nVidia nForce Pro 2200 & 2050 voltage 1.5V
- Up to 8 fan status
- Supports System Management Utility
- S3 Suspend To RAM (STR)
|
FAN | - Total up to eight 4-pin fan status
- 8 Tachometer Monitoring
- Status Monitor for On/Off Control
- Supports 3-pin fans (without speed control)
- Low Noise Fan Speed Control
- Pulse Width Modulated (PWM) fan connector
|
Temperature | Monitoring for CPU and chassis environment |
LED | Overheat LED |
Other Features | Chassis Intrusion Header |
|
Operating Environment / Compliance |
RoHS | RoHS Compliant Version Available, Revision 3.xx or later |
|
OS compatibility |
Please see our OS Compatibility Chart |
|
Regulatory |
FCC | Class B |