|
Product SKUs |
MBD-H8DA3-2-O | H8DA3-2 (Standard Retail Pack) |
MBD-H8DA3-2-B | H8DA3-2 (Bulk Pack) |
|
Physical Stats |
Form Factor | Extended ATX |
Dimensions | 12" x 13.05" (30.5cm x 33.2cm) |
|
Processor/Chipset |
CPU | - Dual 1207-pin Socket F
- Supports up to two Six-Core / Quad-Core / Dual-Core AMD Opteron™ 2000 Series processors
- HT3.0 Link support ^
|
Chipset | - nVIDIA MCP55Pro
- nVIDIA IO55
|
|
System Memory |
Memory Capacity | - 8x 240-pin DIMM sockets support up to
- 64GB DDR2 800/667/533/400 MHz SDRAM
- Single or Dual (recommended) channel memory support
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
|
Memory Type | DDR2 800/667/533 MHz Reg. ECC SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes | 256MB, 512MB, 1GB, 2GB, 4GB, 8GB |
Memory Voltage | 1.8 V only |
|
On-Board Devices |
Clock Generator | nVIDIA MCP55Pro |
SAS | - LSI SAS1068E *
- RAID 0, 1, 10 support
- (Optional: AOC-IButton68) RAID 5 support
|
SATA | - nVidia MCP55 Pro SATA2 3.0Gbps Controller
- 6 SATA Ports
- nVidia RAID 2.0
- SATA RAID 0, 1, 0+1, 5, JBOD Support
|
IPMI | - Support for Intelligent Platform Management Interface v.2.0
- 200-pin IPMI slot (SIMLP)
- (Optional: AOC-SIMLP-B(+) R 3.00)
- (Optional: AOC-SIMLP-3(+) R 3.00) with 3rd LAN support
- NOTE: KVM-over-LAN not supported - there is no DVO signal to the IPMI slot
- RMM (Remote Management Module)
- (Card not included)
|
Network Controllers | - nVidia MCP55 Pro Chipset Dual-port LAN / Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
|
Super I/O | Winbond 83627HG |
Audio | HD Audio ALC883 |
|
Input / Output |
SAS | - Eight SAS / SATA (internal) ports
- Up to 8 SAS / SATA hard drives supported
|
SATA | 6 SATA2 ports |
IDE | - Single EIDE channel support up to two UDMA IDE devices
- Supports UDMA Mode 5
- Supports PIO Mode 4
- Supports ATA 100/133
|
Floppy | 1 Floppy port; 1.44 MB support |
LAN | 2 RJ45 LAN ports |
USB | - FUCI
- Up to 8 USB Ports 2.0 Compliant, 1.1 Compliant
- 4 Rear Ports
- 4 Internal Headers
|
Keyboard / Mouse | PS/2 keyboard and mouse ports |
Serial Ports | - 2x Fast UART 16550 serial ports
- 2 Headers
|
Parallel Port | 1 ECP / EPP parallel port |
Audio | 1 Line In / Line Out / Microphone port |
Others | 1 SATA DOM power connector |
|
Expansion Slots |
PCI-Express | - 2 x16 PCI-e Slots(nVidia SLI Technology Supported)
- 1 x8 PCI-e (using x16 slot)
- 2 x4 PCI-e (using x8 slot)
|
PCI-X | 1x 32-bit PCI slot |
|
Chassis ( Optimized for H8DA3-2 ) |
Mid-Tower | - CSE-733T-465B
- CSE-733TQ-465B
|
Tower / 4 U Rackmount | - CSE-743TQ-645
- CSE-743TQ-865B
|
Important Chassis Notes | To ensure system stability, a 550W (minimum) ATX power supply [ 4-pin (+12V), 8-pin (+12V) and 24-pin are required] |
|
System BIOS |
BIOS Type | 8Mb Flash EEPROM with AMI BIOS |
BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- USB Keyboard Support
- SMBIOS 2.3
|
|
Management |
Software | - Optional IPMI (Intelligent Platform Management Interface) 2.0
- Super Doctor III
- Watch Dog
|
Power Configurations | - ACPI Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Keyboard wakeup from soft-off
- Power-on mode control for AC power loss recovery
- Internal/External modem remote ring-on
- Suspend to RAM (STR)
|
|
PC Health Monitoring |
CPU | - Monitors CPU Core Voltages, +3.3V, +5V, +12V, 5V Standby, VBAT
- CPU switching voltage regulator
|
FAN | - Total up to 8-fan status tachometer monitoring
- Up to eight 4-pin fan headers
- Status monitor for speed control
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- PC temperature sensing logic
|
LED | - CPU / System Overheat LED
- +5 Standby Alert LED
|
Other Features | - Chassis Intrusion Detection
- Chassis Intrusion Header
- Chipkill Support
|
|
Operating Environment / Compliance |
RoHS | RoHS Compliant 6/6, Pb Free |
Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|
|
OS compatibility |
Please see our OS Compatibility Chart |
|
Regulatory |
FCC | Class B |