| |
Product SKUs |
| SYS-F628R3-R72B+ | SuperServer F628R3-R72B+ (Black) |
| |
Motherboard |
| Super X10DRFR |
| |
Processor/Cache |
| CPU | - Intel® Xeon® processor E5-2600 v3 family
- (up to 145W TDP **)
- Dual Socket R3 (LGA 2011)
|
| Cores / Cache | Up to 18 Cores / Up to 45MB Cache |
| System Bus | QPI up to 9.6 GT/s |
| Note | ** Please contact your Supermicro sales representative for additional details. |
| |
System Memory |
| Memory Capacity | - 16x 288-pin DDR4 DIMM sockets
- Up to 1TB ECC LRDIMM, 512GB ECC RDIMM
|
| Memory Type | 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | - RDIMM: 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64 GB, 32 GB
|
| Memory Voltage | 1.2 V |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
On-Board Devices |
| Chipset | Intel® C612 Express chipset |
| SATA | SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
| SAS | - SAS-2 via LSI 2208 (1GB cache)
- HW RAID 0, 1, 5, 6, 10, 50, 60 support
|
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- ASPEED AST2400 BMC
|
| Network Controllers | - Intel i350-AM2 Dual port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| Graphics | ASPEED AST2400 BMC |
| |
Input / Output (per Node) |
| Serial ATA | - 8x SATA3 (6Gbps) ports
- 2x SATA3 powered ports that support SATA DOM
|
| SAS | 8x SAS-2 (6 Gb/s) ports |
| LAN | - 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB | 2x USB 3.0 ports |
| VGA | 1x VGA port |
| Serial Port / Header | 1x Fast UART 16550 port |
| |
Management |
| Software | - SuperDoctor® 5
- Watch Dog
- NMI
- IPMI 2.0
- SMCBU and SMM
|
| Power Configurations | - ACPI / APM Power Management
- Power-on mode for AC power recovery
|
| |
Chassis |
| Form Factor | 4U Rackmount |
| Model | CSE-F424AS-R1K28B |
| |
Dimensions and Weight |
| Width | 17.63" (448mm) |
| Height | 6.96" (177mm) |
| Depth | 29" (737 mm) |
| Package | 28.3" (W) x 15.0" (H) x 42.4" (D) |
| Weight | - Net Weight: 105 lbs (47.63 kg)
- Gross Weight: 150 lbs (68.04 kg)
|
| Available Colors | Black |
| |
Front Panel |
| Buttons | - Power On/Off button
- System Reset button
|
| LEDs | - Power status LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- Power fail LED
|
| |
Expansion Slots (per node) |
| PCI-Express | - 1x PCI-E 3.0 x16 (LP) + 1x Micro LP
- MicroLP Adapter Matrix (Networking options)
|
| |
Drive Bays (per node) |
| Hot-Swap | (6+2) 3.5" Hot-swap SAS/SATA HDD trays |
| |
Backplane |
| 1x SAS/SATA backplane |
| |
System Cooling (per node) |
| Fans | 2x 8cm 11k RPM middle fans |
| |
Power Supply |
| 1280 W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2 |
| AC Input | - 1000 W Output @ 100-140 V, 12-8 A, 50-60 Hz
- 1280 W Output @ 180-240 V, 8-6 A, 50-60 Hz
|
| DC Output | - 1000 W: +12 V / 83 A; +5 V sb / 4 A
- 1280 W: +12 V / 106.7 A, +5V sb / 4 A
|
| Certification | Platinum Certified |
| |
System BIOS |
| BIOS Type | 128 Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | - Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant |
| Environmental Specifications | - Operating Temperature: 5°C to 40°C (41°F to 104°F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|
0 Artikel
