| |
Product SKUs |
| SYS-F628R3-FC0 | SuperServer F628R3-FC0 (Black) |
| |
Motherboard |
| Super X10DRFF-C |
| |
Processor/Cache |
| CPU | - Intel® Xeon® processor E5-2600 v4/
- v3 family
- (up to 145W TDP)
- *
- Dual Socket R3 (LGA 2011)
|
| Cores / Cache | Up to 22 Cores / Up to 55MB Cache |
| System Bus | QPI up to 9.6 GT/s |
| Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| |
System Memory |
| Memory Capacity | - 8x 288-pin DDR4 DIMM slots
- Up to 1TB ECC 3DS LRDIMM, 512GB ECC RDIMM
|
| Memory Type | 2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | - RDIMM:
- 64GB, 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64 GB, 32 GB
- 3DS LRDIMM: 128GB
|
| Memory Voltage | 1.2 V |
| Error Detection | Corrects single-bit errors |
| |
On-Board Devices |
| Chipset | Intel® C612 chipset |
| SAS | - SAS3 (12Gbps) via LSI 3008
- SW RAID 0, 1, 10 support
|
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- ASPEED AST2400 BMC
|
| Network Controllers | - Intel® i210 Single Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
- 1x Realtek RTL8211E PHY (dedicated IPMI)
|
| Graphics | Aspeed AST2400 BMC Controller |
| |
Input / Output (per Node) |
| SAS | 4x SAS3 (12Gbps) ports |
| LAN | - 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB | 2x USB 3.0 ports |
| VGA | 1x VGA port |
| |
Chassis |
| Form Factor | 4U Rackmount |
| Model | CSE-F424AF-R1K28BP |
| |
Dimensions and Weight |
| Width | 17.63" (448mm) |
| Height | 6.96" (177mm) |
| Depth | 29" (737 mm) |
| Package | 28.3" (W) x 15.0" (H) x 42.4" (D) |
| Weight | - Net Weight: 105 lbs (47.63 kg)
- Gross Weight: 150 lbs (68.04 kg)
|
| Available Colors | Black |
| |
Front Panel |
| Buttons | - Power On/Off button
- UID button
|
| LEDs | - Power status LED
- Hard drive activity LED
- 2x Network activity LEDs
|
| |
Expansion Slots (per node) |
| PCI-Express | 1x PCI-E 3.0 x16 (LP) via riser card |
| |
Drive Bays (per node) |
| Hot-Swap | 4x 3.5" Hot-swap SAS3 HDD trays |
| |
System Cooling |
| Fans | 8x 8cm 9.5K RPM Rear Fans and PWM fan speed control |
| |
Power Supply |
| 1280 W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2 |
| AC Input | - 1000W Output @ 100-140V, 8-12A, 50-60Hz
- 1280W Output @ 180-240V, 6-8A, 50-60Hz
|
| DC Output | - 1000 W: +12 V / 83 A; +5 V sb / 4 A
- 1280 W: +12 V / 106.7 A, +5V sb / 4 A
|
| Certification | Platinum Certified |
| |
System BIOS |
| BIOS Type | 128 Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | - Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant |
| Environmental Specifications | - Operating Temperature: 5°C to 40°C (41°F to 104°F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|
0 Artikel
