|
Product SKUs |
SYS-F618R2-RC0+ | SuperServer F618R2-RC0+ (Black) |
|
Motherboard |
Super X10DRFR-N |
|
Processor/Cache |
CPU | - Intel® Xeon® processor E5-2600 v4/
- v3 family
- (up to 145W TDP)
- *
- Dual Socket R3 (LGA 2011)
|
Cores / Cache | Up to 22 Cores / Up to 55MB Cache |
System Bus | QPI up to 9.6 GT/s |
Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
|
System Memory |
Memory Capacity | - 16x 288-pin DDR4 DIMM slots
- Up to 2TB ECC 3DS LRDIMM, 1TB ECC RDIMM
|
Memory Type | 2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
DIMM Sizes | - RDIMM:
- 64GB, 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64 GB, 32 GB
- 3DS LRDIMM: 128GB
|
Memory Voltage | 1.2 V |
Error Detection | Corrects single-bit errors |
|
On-Board Devices |
Chipset | Intel® C612 chipset |
SAS | LSI 3008 SAS3 (12Gbps) controller |
SATA | SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- ASPEED AST2400 BMC
|
Network Controllers | - Intel i350-AM2 Dual port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
Graphics | ASPEED AST2400 BMC |
|
Input / Output (per Node) |
SAS | 6 SAS3 (12Gbps) ports |
LAN | - 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
USB | 2 USB 3.0 ports |
VGA | 1x VGA port |
|
Management |
Software | - Intel® Node Manager
- SuperDoctor® 5
- Watch Dog
- NMI
- IPMI 2.0
- SUM and SSM
|
Power Configurations | - ACPI / APM Power Management
- Power-on mode for AC power recovery
|
|
Chassis |
Form Factor | 4U Rackmount |
Model | CSE-F418BC-R2K04BP |
|
Dimensions and Weight |
Width | 17.63" (448mm) |
Height | 6.96" (177mm) |
Depth | 29" (737 mm) |
Package | 28.3" (W) x 15.0" (H) x 42.4" (D) |
Weight | - Net Weight: 150 lbs (68.04 kg)
- Gross Weight: 200 lbs (90.71 kg)
|
Available Colors | Black |
|
Front Panel |
Buttons | - Power On/Off button
- UID button
|
LEDs | - Power status LED
- Hard drive activity LED
- 2 Network activity LEDs
- Information LED (UID, Fan failure, Overheat)
|
|
Expansion Slots (per node) |
PCI-Express | - 1 PCI-E 3.0 x16 Low-profile
- 1 PCI-E 3.0 x8 (Micro LP)
- MicroLP Adapter Matrix (Networking options)
|
|
Drive Bays (per node) |
Hot-Swap | - 6x 2.5" Hot-swap SAS/SATA drives
- Optional NVMe support
- Note: NVMe support requires 2 CPUs installed
|
|
Backplane |
1x SAS/SATA backplane |
|
System Cooling (per node) |
Fans | 3x 4cm 14.000 RPM middle fans |
|
Power Supply (76mm Width) |
2000W Redundant Power Supplies with PMBus |
Total Output Power | 1000W/2000W |
Dimension(W x H x L) | 76 x 40.4 x 336 mm |
Input | - 100-127 Vac / 12-9.5 A / 50-60 Hz
- 200-220 Vac / 10-9.5 A / 50-60 Hz
- 220-230 Vac / 10-9.8 A / 50-60 Hz
- 230-240 Vac / 10-9.8 A / 50-60 Hz
- 200-240 Vac / 11.8-10 A / 50-60 Hz (UL/cUL only)
|
+12 V | - Max: 83.3A & Min: 0A (100-127 Vac)
- Max: 150A & Min: 0A (200-220 Vac)
- Max: 165A & Min: 0A (220-230 Vac)
- Max: 166.7A & Min: 0A (230-240 Vac)
- Max: 166.7A & Min: 0A (200-240 Vac)(UL/cUL only)
|
+5Vsb | Max: 1A / Min: 0A |
Output Type | 27 Pairs Gold Finger Connector |
Certification | UL/cUL/CB/BSMI/CE/CCC Titanium Level |
|
System BIOS |
BIOS Type | 128 Mb SPI Flash EEPROM with AMI BIOS |
BIOS Features | - Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
|
Operating Environment / Compliance |
RoHS | RoHS Compliant |
Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|