| |
Product SKUs |
| MBD-C2G41
-O | - C2G41
- (Standard Retail Pack)
|
| MBD-C2G41
-B | |
| |
Physical Stats |
| Form Factor | Micro ATX |
| Dimensions | 9.6" x 8.6" (24.4cm x 21.8cm) |
| |
Processor/Cache |
| CPU | - Single LGA775 Socket
- Supports Intel® Core?2 Quad Q9000/Q8000 series
- Supports Intel® Core?2 Duo E8000/E7000/E6000/E4000 series
- Supports Intel Pentium E5000/E2000 series
- Supports Intel Celeron E1000 and 400 series
|
| System Bus | 1333 / 1066 / 800 MHz system bus |
| |
System Memory |
| Memory Capacity | - Supports up to 4 GB 1066 / 800MHz DDR3 non-ECC Un-Buffered memory
- 2 DIMM sockets (Dual Channel)
|
| Memory Type | 1066 / 800MHz Un- Buffered non-ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 256MB, 512MB, 1GB, 2GB |
| Memory Voltage | 1.5V |
| |
On-Board Devices |
| Chipset | |
| SATA | Intel ICH7 SATA (3Gbps) Controller |
| Audio | Realtek ALC888 7.1 HD audio |
| Super I/O | ITE IT8720F-JX |
| TPM | TPM 1.2 onboard |
| Clock Generator | IDTCV194CPAG |
| |
Input / Output |
| Serial ATA | - 4 Serial ATA ports
- 4 SATA hard drives supported
|
| LAN | 1x RJ45 LAN ports |
| USB | - 4x USB rear ports
- 2x USB internal header(4 ports)
- Total 8x USB 2.0 Compliant
|
| Audio | - 8x analog outputs (7.1 HD)
- 1x Optical S/PDIF digital output
- 1x Coaxial S/PDIF digital output
|
| Video | - 1x HDMI port
- 1x VGA, D-Sub port
- HDMI+VGA Dual Display
|
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Port / Header | 2x Fast UART 16550 serial headers |
| |
I/O Panel |
| Please see this board's I/O Panel |
| |
OS compatibility |
| Please see our OS Compatibility Chart |
| |
Chassis ( Optimized for C2G41
) |
| Important Chassis Notes | - To ensure system stability, a 300W (minimum) ATX power supply
- [4-pin (+12V), 8-pin (+12V) and 24-pin are required]
|
| |
Expansion Slots |
| PCI-Express | - 1x (x16) PCI-e slot
- 1 (x1) PCI-e slot
|
| PCI | 2x 32-bit PCI slots |
| |
System BIOS |
| BIOS Type | 16 Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
|
| |
Management |
| Software | SuperDoctor® III |
| Power Configurations | - ACPI / ACPM Power Management
- Main Switch Override Mechanism
- Keyboard wakeup from soft-off
- Power-on mode for AC power recovery
|
| |
PC Health Monitoring |
| Voltage | - Monitors for CPU cores, +1.8 V, +3.3 V, +5 V, ±12 V, +3.3 V Standby, +5 V Standby, VBAT, HT, Memory, chipset voltages.
- 3-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
|
| FAN | - Total of 3 fan headers supporting up to 3 fans
- Three 4-pin fan headers
- Status monitor for speed control
- Status monitor for on/off control
- Supports 3-pin fans (w/o speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Monitor 2 (TM2) support
- PECI
|
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant 6/6, Pb Free |
| Environmental Specifications | - Operating Temperature: 10° to 35 °C (50° to 95 °F)
- Non-operating temperature: -40° to 70 °C (-40° to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5 to 95% (non-condensing)
|
0 Artikel
