| |
Product SKUs |
| SYS-5017R-WRF | SuperServer 5017R-WRF (Black) |
| |
Motherboard |
| Super X9SRW-F |
| |
Processor/Cache |
| CPU | - Single Socket R (LGA 2011)
- Intel® Xeon® processor E5-2600 and E5-2600/1600 v2 family?
|
| Note | ? BIOS version 3.0 or above is required |
| Cache | Up to 30 MB |
| System Bus | QPI up to 8 GT/s |
| |
System Memory |
| Memory Capacity | - 8x 240-pin DDR3 DIMM sockets
- Up to 512 GB DDR3 ECC LRDIMM
- Up to 256 GB DDR3 ECC registered memory (RDIMM)
- up to 64 GB DDR3 ECC/non-ECC unbuffered memory (UDIMM)
|
| Memory Type | 1866/1600/1333/1066MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 32 GB, 16 GB, 8 GB, 4 GB, 2 GB, 1 GB |
| Memory Voltage | 1.5 V, 1.35 V |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
On-Board Devices |
| Chipset | Intel C602 chipset |
| SATA | - SATA 2.0 3 Gb/s with RAID 0, 1, 5, 10
- SATA 3.0 6 Gb/s with RAID 0, 1, 5, 10
|
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Renesas SH7757 BMC
|
| Network Controllers | - Intel i350 Dual port GbE LAN
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| VGA | Matrox G200eW 16MB DDR2 graphics controller |
| |
Input / Output |
| SATA | - 2x SATA 3.0 ports (6 Gb/s)
- 4 SATA 2.0 ports (3 Gb/s)
|
| LAN | - 2x RJ45 LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB | 8x USB 2.0 ports total(4x rear + 4x via headers) |
| VGA | 1x VGA port |
| Serial Port / Header | 1x Fast UART 16550 serial port |
| |
Chassis |
| Form Factor | 1U Rackmount |
| Model | CSE-815TQ-R500WB |
| |
Dimensions |
| Height | 1.7" (43 mm) |
| Width | 17.2" (437mm) |
| Depth | 25.6" (650mm) |
| Weight | - Net Weight: 23.5 lbs (10.7 kg)
- Gross Weight: 36 lbs (16.3 kg)
|
| Available Colors | Black |
| |
Front Panel |
| Buttons | - Power On/Off button
- System Reset button
|
| LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
|
| |
Expansion Slots |
| PCI-Express | - 2x PCI-E 3.0 x16 Full-height slots
- 1x PCI-E 3.0 x8 Low-Profile slot
- UIO AoC Compatibility Matrix
|
| |
Drive Bays |
| Hot-Swap | 4x 3.5" Hot-swap drive bays |
| |
Backplane |
- SAS/SATA HDD Backplane
- (SAS support requires optional SAS controller)
|
| |
System Cooling |
| Fans | 3x 4 cm Counter-rotating PWM fans |
| |
Power Supply with Power Distributor |
| 500 W high-efficiency (94 %+) redundant power supplies w/ PMBus and I²C |
| AC Input | 100-240 V, 50-60 Hz, 6.2-2.6 A |
| DC Output | - 3 A @ +5V standby
- 42 A @ +12V
|
| With Power Distributor | - +5 V: 25 A
- +3.3 V: 12 A
- -12V: 0.6 A
|
| Certification | Platinum Certified |
| |
System BIOS |
| BIOS Type | 8Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | - DMI 2.3
- PCI 2.3
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
|
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant |
| Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|
0 Artikel
