| |
Product SKUs |
| AS-4042G-6RF | A+ Server 4042G-6RF (Black) |
| |
Motherboard |
| Super H8QG6-F |
| |
Processor/Chipset |
| CPU | - Quad 1944-pin Socket G34
- Supports up to four 16/12/8/4-Core ready AMD Opteron™ 6000 Series processors
- HT3.0 Link support
|
| Chipset | AMD SR5690/SR5670/SP5100 Chipset |
| |
System Memory |
| Memory Capacity | - 32 DIMM sockets
- Supports up to 1TB Registered ECC or 256GB Unbuffered ECC/non-ECC DDR3 1600/1333/1066 SDRAM in 32 DIMMs
- Quad channel memory bus
- For Dual or Quad CPUs: Recommended that memory be populated equally in adjacent memory banks
- See Detailed Memory Support Matrix
|
| Memory Type | Registered ECC or unb. ECC / non-ECC DDR3 1600/1333/1066 MHz SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 1GB, 2GB, 4GB, 8GB, 16GB, 32GB |
| Memory Voltage | 1.35V or 1.5V |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
On-Board Devices |
| SAS | LSI 2008 SAS2 RAID 0, 1, 10, 5 (option) |
| SATA | AMD SP5100 (RAID 0, 1, 10) |
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Winbond® WPCM450 BMC
|
| Network Controllers | - Intel® 82576 controller, Dual-Port Gigabit Ethernet
- 10/100/1000BASE-T support
|
| Super I/O | Winbond® W83527 chip |
| VGA | Matrox G200 16MB DDR2 graphics |
| |
Input / Output |
| SAS | 8x 6Gbps SAS/SATA ports |
| SATA | 6x SATA2.0 (3Gb/s) Ports |
| LAN | - 2 RJ45 LAN ports
- 1 RJ45 Dedicated LAN supports IPMI
|
| USB | - 7x USB 2.0 ports
- 2x Rear, 4x internal header, and 1x type A
|
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Ports | - 1x Fast UART 16550 serial port
- 1x serial port header
|
| VGA | 1x VGA port |
| |
Chassis |
| Form Factor | Tower / 4U Rackmountable |
| Model | SC748TQ-R1400B |
| |
Dimensions |
| Height | 7.0" (178 mm) |
| Width | 17.8" (452mm) |
| Depth | 28.4" (721mm) |
| Gross Weight | 87 lbs (39.5 kg) |
| Available Colors | Black |
| |
Front Panel |
| Buttons | - Power On/Off button
- System Reset button
|
| LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- Power Fail LED
|
| Ports | 2x USB Ports |
| |
Drive Bays |
| Hot-Swap | - 5x 3.5" Hot-swap SAS/SATA Drive Bays
- SAS or enterprise SATA HDD only recommended
|
| Peripheral Bay(s) | - 2x 5.25" Peripheral Drive Bay
- 1x 5.25" Bay For Floppy Drive
|
| |
Expansion Slots |
| PCI-Express | - 2x PCI-e 2.0 x16 slots
- 1x PCI-e 2.0 x8 slot
- 1x UIO or 1x PCI-e 2.0 x8 slot
|
| |
SAS / SATA Backplane |
| SAS / SATA Hard Drive Backplane with SES2 |
| |
System Cooling |
| Fans | - 3x 8200 RPM Hot-Swappable Cooling Fans
- 3x 8200 RPM Hot-Swappable Rear Exhaust Fan
|
| Shrouds | 1x Air Shroud |
| |
Power Supply |
| Redundant 1400 W high-efficiency power supply with PMBus |
| AC Input | - 1200 W: 100 - 140 V, 50 - 60 Hz, 10.5 - 14.7 A
- 1400 W: 180 - 240 V, 50 - 60 Hz, 7.2 - 9.5 A
|
| DC Output +5 V standby | 6 A |
| DC Output +12 V | - 100 A @ 100-140 V
- 117 A @ 180-240 V
|
| With Power Distributor | - +5 V: 30 A
- +3.3 V: 25 A
- -12V: 0.6 A
|
| Certification | Gold Certified |
| |
PC Health Monitoring |
| CPU | - Monitors CPU Core Voltages, +3.3V, +5V, +12V, 5V Standby, VBAT
- CPU 4-Phase-switching voltage reulator
|
| FAN | - Total up to 9-fan status tachometer monitoring
- Up to nine 3-pin fan headers
- Status monitor for speed control
- Support 3-pin fans with fan-speed control
|
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- PC Temperature Sensing Logic
|
| LED | - CPU / System Overheat LED
- Suspend-State Indicator LED
- +5 V Standby Alert LED
|
| Other Features | - Chassis Intrusion Detection
- Chassis Intrusion Header
|
| |
System BIOS |
| BIOS Type | - 8Mb Flash EEPROM with AMI BIOS
- SST 49LF080A BIOS Chip
|
| BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- USB Keyboard Support
- SMBIOS 2.3
|
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant |
| Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|
0 Artikel
