| |
Product SKUs |
| AS-1022GG-TF | A+ Server 1022GG-TF (Black) |
| |
Motherboard |
| Super H8DGG-QF |
| |
Processor/Chipset |
| CPU | - Dual 1944-pin Socket G34
- Supports up to two 16/12/8/4-Core ready AMD Opteron™ 6000 Series processors
- HT3.0 Link support
|
| Chipset | Dual AMD chipset SR5690 + SP5100 |
| Note | Supports 6000 processors with Max ACP 80W (TDP 115W) at 30°C |
| |
System Memory |
| Memory Capacity | - Sixteen DIMM sockets
- Support up to 512GB Registered ECC or 128GB Unbuffered ECC/non-ECC DDR3 1600/1333/1066 SDRAM in 16 DIMMs*
- Quad channel memory bus
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
|
| Memory Type | DDR3 1600/1333/1066 MHz Registered ECC or unbuffered ECC / non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 1GB, 2GB, 4GB, 8GB, 16GB, 32GB |
| Memory Voltage | 1.35V or 1.5V |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
On-Board Devices |
| SATA | AMD SP5100 (RAID 0, 1, 10) |
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Winbond® WPCM450 BMC
|
| Network Controllers | - Intel® 82576 controller, Dual-Port Gigabit Ethernet
- 10/100/1000BASE-T support
|
| VGA | Matrox G200 16MB DDR2 |
| Super I/O | Winbond® W83527 chip |
| |
Expansion Slots |
| 1U | 2/1 PCI-E 2.0 x16/x8 in x16 (2 GPU) |
| |
Input / Output |
| SATA | 3x SATA2.0 (3Gb/s) Ports |
| LAN | - 2 RJ45 LAN ports
- 1 RJ45 Dedicated LAN supports IPMI
|
| USB | - 4x USB 2.0 ports
- 2x Rear and 2x header
|
| VGA | 1x VGA port |
| Serial Ports | - 1x Fast UART 16550 serial port
- 1x serial port header
|
| |
System BIOS |
| BIOS Type | 16Mb SPI Flash ROM with AMI® BIOS |
| BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- USB Keyboard Support
- SMBIOS 2.3
|
| |
Chassis |
| Form Factor | 1U Rackmount |
| Model | SC818G-1400B |
| |
Dimensions |
| Height | 1.7" (43 mm) |
| Width | 17.2" (437mm) |
| Depth | 28.2" (716 mm) |
| Gross Weight | 38 lbs (17.2 kg) |
| Available Colors | Black |
| |
Front Panel |
| Buttons | - Power On/Off button
- System Reset button
|
| LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED / Fan fail LED / UID LED
|
| |
Drive Bays |
| Hot-Swap | - 3x 3.5" Hot-swap SATA drive bays
- Enterprise SATA HDD only recommended
|
| |
Peripheral Drives |
| DVD-ROM | Slim DVD-ROM drive (optional) |
| |
Backplane |
| SATA HDD Backplane |
| |
System Cooling |
| Fans | 8x 4 cm heavy-duty counter-rotating PWM fans with optimal fan speed control |
| |
Power Supply |
| 1400 W high-efficiency power supply with PMBus |
| AC Input | - 1200 W: 100 - 140 V, 50 - 60 Hz, 10.5 - 14.7 A
- 1400 W: 180 - 240 V, 50 - 60 Hz, 7.2 - 9.5 A
|
| DC Output +5 V standby | 4 A |
| DC Output +12 V | - 100 A @ 100-140 V
- 117 A @ 180-240 V
|
| Certification | Gold Certified |
| |
PC Health Monitoring |
| CPU | - Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, memory, chipset
- CPU switching voltage regulator
|
| FAN | - Up to 8-fan status tachometer monitoring
- Up to eight 4-pin fan headers
- Status monitor for speed control
- 3-pin fan support (w/o speed control)
- Low noise fan speed control (4-pin fan only)
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal control for 8x Fan connectors
- I²C temperature sensing logic
|
| LED | - CPU / System Overheat LED
- +5 V Standby Alert LED
|
| Other Features | - Chassis Intrusion Detection
- Chassis Intrusion Header
|
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant |
| Environmental Specifications | - Operating Temperature: 5°C to 30°C (41°F to 86°F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|
0 Artikel
