| |
Product SKUs |
| MBD-A1SA7-2750F -B | A1SA7-2750F (Bulk Pack) |
| |
Physical Stats |
| Form Factor | Proprietary |
| Dimensions | 8.3" x 6.7" (21.08cm x 17.02cm) |
| |
Processor/Cache |
| CPU | - Intel® Atom? Processor C2750(formerly Avoton)
- CPU TDP 20W (8-Core)
- FCBGA 1283
- System-on-Chip
|
| |
System Memory |
| Memory Capacity | - 4x 240-pin DDR3 UDIMM socket
- Supports up to 64GB DDR3 ECC or Non-ECC memory
|
| Memory Type | 1600/1333MHz ECC or non-ECC UDIMM SDRAM, 240-pin gold-plated DIMMs, x8 width only |
| DIMM Sizes | 16GB, 8GB, 4GB, 2GB |
| Memory Voltage | 1.5 V, 1.35 V |
| |
On-Board Devices |
| SATA | - SoC controller for 1x SATA3 (6Gbps) port
- LSI® 2116 SW controller for 16x SATA3 (6Gbps) ports; SATA3 or SAS2 with IT mode
|
| USB 2.0 | C2000 SoC |
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Aspeed AST 2400 BMC
|
| Video | Aspeed AST2400 BMC |
| |
Input / Output |
| Serial ATA | 17x SATA3 (6Gbps) ports |
| LAN | - 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB | 3x USB 2.0 (2 rear, 1 Type A) |
| Serial Port | 1x Fast UART 16550 Serial Port |
| DOM | 1x SATA DOM (Disk on Module) power connector |
| VGA | 1x VGA Port |
| Others | TPM 1.2 header |
| |
SuperServers Using A1SA7-2750F |
| 1U System | SSG-5018A-AR12L |
| |
Chassis ( Optimized for A1SA7-2750F ) |
| 1U Chassis | - SC816LT-655B
- SC801LTQ-R406B
|
| |
Expansion Slots |
| PCI-Express | 1x PCI-E 2.0 x4 (in x8) slot |
| |
System BIOS |
| BIOS Type | 64 Mb SPI Flash EEPROM with AMI UEFI BIOS |
| BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- ACPI 5.0
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI
|
| |
Management |
| Software | - SuperDoctor® 5
- IPMI 2.0
- Watch Dog
- NMI
|
| Power Configurations | - ACPI / ACPM Power Management
- Main Switch Override Mechanism
- Power-on mode for AC power recovery
|
| |
PC Health Monitoring |
| Voltage | Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +5V Standby, VBAT, Memory Voltages. |
| FAN | - Total of 7x 4-pin fan headers
- 7x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
|
| LED | System Overheat LED |
| Other Features | - Chassis intrusion detection
- Chassis intrusion header
- Support shared IPMI with Supermicro proprietary 10GbE card AOC-STGN-i1SF
- Support Supermicro power built in SATA DOM
|
| |
Operating Temperature |
| 0°C to 50°C |
0 Artikel
