| |
Product SKUs |
| AS-2021M-32RV | A+ Server 2021M-32R (Silver) |
| AS-2021M-32RB | A+ Server 2021M-32RB (Black) |
| |
Motherboard |
| Super H8DM3-2 |
| |
Processor/Chipset |
| CPU | - Dual 1207-pin Socket F
- Supports up to two Six-Core AMD Opteron™ 2000 Series (Socket F) processors
- HT3.0 Link support
|
| Chipset | |
| |
System Memory |
| Memory Capacity | - 8x 240-pin DIMM sockets support up to
- 64GB DDR2 800/667/533/400 MHz SDRAM
- For Single CPU: Memory must be populated in CPU1 DIMMs only
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
- Dual channel memory bus
|
| Memory Type | DDR2 800/667/533/400MHz Reg. ECC SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 256 MB, 512 MB, 1GB, 2GB, 4GB, 8GB |
| Memory Voltage | 1.8 V only |
| |
On-Board Devices |
| SAS | - 8-Port LSI 1068E SAS Controller *
- SAS RAID 0, 1, 10, JBOD Support
|
| SATA | - nVidia MCP55 Pro SATA2 3.0Gbps Controller
- 6 SATA2 Ports
- nVidia RAID 2.0
- SATA RAID 0, 1, 0+1, 5 JBOD Support
|
| IPMI | - Intelligent Platform Management Interface v.2.0, Low Profile
- RMM (Remote Management Module)
- (Optional: AOC-SIMLP-B(+) R 3.00)
- (Optional: AOC-SIMLP-3(+) R 3.00) with 3rd LAN support
- (Card not included)
|
| Network Controllers | - nVidia MCP55 Pro Chipset Dual-port LAN / Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
|
| VGA | ATI ES1000 Graphics Controller |
| Super I/O | Winbond 83627HF |
| |
Input / Output |
| SAS | 8x SAS ports |
| SATA | 6 SATA2 ports |
| IDE | - Single EIDE channel support up to two UDMA IDE devices
- Supports UDMA Mode 5
- Supports PIO Mode 4
- Supports ATA 100/133
|
| Floppy | 1 Floppy port; 1.44 MB support |
| LAN | 2 RJ45 LAN ports |
| USB | - Up to 6 USB Ports 2.0 Compliant, 1.1 Compatible
- 2 Rear Ports
- 4 Internal Headers
|
| VGA | 1x VGA port |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Ports | - 1x Fast UART 16550 serial port
- 1 serial port header
|
| |
System BIOS |
| BIOS Type | 8Mb Flash EEPROM with AMI BIOS |
| BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- USB Keyboard Support
- SMBIOS 2.3
|
| |
Chassis |
| Form Factor | - 2U Rackmountable
- Optional Rackmount Kit (CSE-PT26)
|
| Model | SC825TQ-R700LPV |
| |
Dimensions |
| Height | 3.5" (89mm) |
| Width | 17.2" (437mm) |
| Depth | 25.5" (648 mm) |
| Gross Weight | 56 lbs (25.4kg) |
| Available Colors | Silver, Black |
| |
Front Panel |
| Buttons | - Power On/Off button
- System Reset button
|
| LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- Power fail LED
|
| Ports | 2x USB Ports + DB9 COM Port (optional) |
| |
Drive Bays |
| Hot-Swap | 8 x 3.5" SAS / SATA Hot-swap drive trays (supports SES2 drives) |
| |
Peripheral Drives |
| DVD-ROM | Slim 8x DVD, 24x CD, DVD-ROM Drive |
| Floppy | Slim 1.44MB Floppy Drive (Optional) |
| |
Expansion Slots |
| PCI-Express | - 2 x8 PCI-e slots
- 1 x4 PCI-e (in a x8 physical slot)
- 1 SEPC (Supermicro extended Power Connector) slot for 2U active riser cards with a power extension (i.e. CSE-RR2UE-AX)
|
| PCI-X | - 1 64-bit 133MHz PCI-X (3.3V) slots
- 2 64-bit 133/100MHz PCI-X (3.3V) slots
|
| IPMI | IPMI 2.0 expansion slot |
| Addon Card Type | Supports low-profile full-length addon cards |
| |
Backplane |
| 1x 2U SAS / SATA backplane w/ SES2 Enclosure Management |
| |
System Cooling |
| Fans | 3x 80 mm 6300 RPM fans |
| Shroud | 1x Air Shroud |
| |
Power Supply |
| 700 W AC-DC power supply and power distributor w/ PFC |
| AC Input | 100 - 240 V, 60-50 Hz, 10 - 4 A |
| +5 V standby | 4 A |
| +12 V | 57 A |
| With Power Distributor | - +5 V: 24 A
- +3.3 V: 21 A
- -12V: 0.6 A
|
| |
PC Health Monitoring |
| CPU | - Monitors CPU Core Voltages, +3.3V, +5V, +12V, 5V Standby, VBAT
- CPU 4-Phase-switching voltage reulator
|
| FAN | - Total up to 8-fan status tachometer monitoring
- Up to six 3-pin and two 4-pin fan headers
- Status monitor for speed control
- 3-pin fan support
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- I²C temperature sensing logic
|
| LED | - CPU / System Overheat LED
- +5 V Standby Alert LED
|
| Other Features | - Chassis Intrusion Detection
- Chassis Intrusion Header
- Chipkill Support
|
0 Artikel
