| |
Produkt-Artikelnummern |
| MBD-H8SMi-2-O | H8SMi-2 (Standard Retail Pack) |
| MBD-H8SMi-2-B | H8SMi-2 (Bulk Pack) |
| |
Physische Werte |
| Form Faktor | ATX |
| Dimensionen | - 12" x 9.6 " (30.5cm x 24.4cm)
- 6 layers
|
| |
Processor/Chipset |
| CPU | - Single 940-pin AM2 Socket
- Supports one Quad-Core AMD Opteron™ 1000 Series(Socket AM2) processorNOTE: Motherboard PCB revision 2.xx is needed to support quad-core processor
|
| System Bus | 1000MHz HyperTransport |
| Chipsatz | nVidia MCP55 Pro |
| |
Arbeitsspeicher |
| Speicherkapazität | - Vier 240-pin DIMM Sockel
- Supports up to 8 GB DDR2 800/667/533 MHz memory
- Single or Dual (recommended) channel memory
|
| Speicher Typ | DDR2 800/667/533MHz un-buffered ECC / non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Größen | 256 MB, 512 MB, 1 GB, 2 GB |
| Speicherspannung | 1.8 V ausschließlich |
| |
On-Board Geräte |
| SATA | - nVidia MCP55 Pro SATA2 3.0Gbps Controller
- 6 SATA Ports
- nVidia RAID 2.0
- SATA RAID 0, 1, 0+1, 5, JBOD Support
|
| IDE | - Supports UDMA Mode 5
- Supports PIO Mode 4
- Supports ATA/100/133
|
| IPMI | - Unterstützung für Intelligent Platform Management Interface (IPMI) v.2.0
- 200-Pin IPMI Slot
- (Optional: AOC-SIMLP-B(+) R 3.00) **
- (Optional: AOC-SIMLP-3(+) R 3.00) ** with 3rd LAN support
- (Optional: AOC-SIM1U(+) R 3.00) ** for 1U
- RMM (Fernverwaltung Module)
- (Karte nicht enthalten)
|
| Netzwerk Controller | - nVidia MCP55 Pro Chipset Dual-port LAN / Ethernet Controller
- Unterstützt 10BASE-T, 100BASE-TX, und 1000BASE-T; RJ45 Ausgang
|
| VGA | - ATI ES1000 Graphics Controller
- 16MB Graphics & VGA port
|
| Super I/O | Winbond 83627HF |
| |
Input / Output |
| SATA | Up to six SATA2 devices |
| IDE | - Single ATA 133/100 EIDE channels support up to two UDMA IDE devices
- Supports UDMA Mode 5
- Supports ATA133/100
|
| Floppy | 1 Floppy port 1.44 MB |
| LAN | 2 RJ45 LAN Ports |
| USB | - 2 USB Rear Ports
- 4 USB Internal Headers
- 6 Total USB 2.0 Compliant, 1.1 Compatible
|
| VGA | 1x VGA Port |
| Tastatur / Maus | PS/2 Keyboard und Maus Ports |
| Serial Ports | - 1x Fast UART 16550 serial Ports
- 1x Header
|
| Andere | 1 SATA DOM power connector |
| |
Chassis ( Optimized for H8SMi-2 ) |
| Wichtige Gehäuse Hinweise | - To ensure system stability, a 300W (minimum) ATX power supply
- [4-pin (+12V) and 24-pin are required]
|
| |
Server(s) ( with H8SMi-2 ) |
| Model(s) | AS -1011M-T2 |
| |
Erweiterungsslots |
| PCI-Express | - 1 x16 PCI-e slot(nVidia SLI Technology Supported)
- 1 x8 PCI-e using x16 slot
- 1 x4 PCI-e using x8 slot
|
| PCI | 3 PCI 32-bit, 33MHz slots |
| |
System BIOS |
| BIOS Typ | 4Mb Flash EEPROM with AMI® BIOS |
| BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- BIOS Rescue Hot Keys
- SMBIOS 2.3
- USB Tastatur Unterstützung
- Hardware BIOS Virus Schutz
|
| |
Management |
| Software | - Optional IPMI (Intelligent Platform Management Interface) 2.0
- Super Doctor III
|
| Leistungskonfigurationen | - ACPI Power Management
- Wake-On-Ring (WOR) Header
- Wake-On-LAN (WOL) Header
- Hauptschalter Überbrückungsmechanismus
- Anschalt-Kontrolle für AC Stromverlust-Zurückgewinnung
- Internal/External modem remote ring-on
|
| |
PC Health Überwachung |
| CPU | - Monitors CPU Core Voltages, +3.3V, +5V, +12V, 5V Standby, VBAT
- Monitor for HyperTransport voltage 1.2V, DDR termination 1.25V
- CPU switching voltage regulator
|
| LÜFTER | - Total up to five 3-pin fan headers
- 5 Fan Status Tachometer monitoring
- Status Monitor for Speed Control
|
| Temperatur | - Überwachung für CPU und Gehäuse Umgebung
- CPU Themal-Trip Unterstützung
- I²C Temperatur-Messungs Logik
|
| LED | - CPU / Overheat LED
- Suspend-Status Indikator-LED
- +5 V Standby Alarm LED
|
| Andere Features | - Gehäuse Zugriff Header
- Gehäuse Zugriff Erkennung
- Chipkill Unterstützung
|
| |
Betriebs-Umgebung / Compliance |
| RoHS | RoHS konform 6/6, PB Frei |
| Umgebungsbedingungen | - Operating Temperature: 10?to 35?C (50?to 95?F)
- Non-operating Temperature: -40?to 70?C (-40?to 158?F)
- Relative Luftfeuchtigkeit für Betrieb: 8% bis 90% (nicht kondensierend)
- Relative Luftfeuchtigkeit ohne Betrieb: 5 bis 95% (nicht kondensierend)
|
| |
Betriebssystem Kompatibilität |
| Please see our OS Compatibility Chart |
| |
Regulatory |
| FCC | Passed to meet FCC standard requirement |
0 Artikel
