|
Produkt-Artikelnummern |
MBD-H8DCT-F | H8DCT-F (Standard Retail Pack) |
|
Physische Werte |
Form Faktor | Proprietary Form |
Dimensionen | 6.5" x 16.64" (16.4cm x 42.3cm) |
|
Processor/Chipset |
CPU | - Dual 1207-pin Socket C32
- Supports two 8/6/4-Core ready AMD Opteron™ 4000 Series processors
- HT3.0 Link support
|
Chipsatz | AMD chipset SR5670 + SP5100 |
|
Arbeitsspeicher |
Speicherkapazität | - 12 DIMM sockets
- Supports up to 192GB Registered ECC or 64GB Unbuffered ECC/non-ECC DDR3 1600/1333/1066 SDRAM in 12 DIMMs
- Dual Kanal Memory Bus
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
- See Detailed Memory Support Matrix
|
Speicher Typ | DDR3 1600/1333/1066 MHz Registered ECC or Unbuffered ECC/non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Größen | 1GB, 2GB, 4GB, 8GB, 16GB, 32GB |
Speicherspannung | 1.35V or 1.5V |
|
On-Board Geräte |
SATA | AMD SP5100 (RAID 0, 1, 10) |
IPMI | - Unterstützung für Intelligent Platform Management Interface (IPMI) v.2.0
- IPMI 2.0 mit Virtual Media über LAN und KVM über LAN Unterstützung
- Winbond® WPCM450 BMC
|
Netzwerk Controller | - Intel® 82576 controller, Dual-Port Gigabit Ethernet
- 10/100/1000BASE-T support
|
VGA | Matrox G200eW 16 MB DDR2 |
Super I/O | Winbond® W83527 chip |
|
Input / Output |
SATA | 4x SATA (3Gb/s) ports |
LAN | - 2 RJ45 LAN Ports
- 1 RJ45 Dedicated LAN supports IPMI
|
USB | - 4x USB 2.0 Ports
- 2x Rear, 1x header (2 ports)
|
VGA | 1x VGA Port |
Serial Ports | 1x Fast UART 16550 serieller Port |
Andere | TPM Header |
|
Erweiterungsslots |
PCI-E | 1 PCI-E 2.0 x16 |
|
Recommended Chassis |
1U Twin | SC808, SC809 |
|
Server(s) ( with H8DCT-F ) |
Model(s) | AS -2022TC-BTRF |
|
System BIOS |
BIOS Typ | 16Mb SPI Flash ROM with AMI® BIOS |
BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- USB Keyboard Unterstützung
- SMBIOS 2.3
|
|
Management |
Software | - IPMI (Intelligent Platform Management Interface) 2.0
- Super Doctor III
|
Leistungskonfigurationen | - ACPI Power Management
- Tastatur Wakeup aus Soft-Off
- Anschalt-Kontrolle für AC Stromverlust-Zurückgewinnung
|
|
PC Health Überwachung |
CPU | - Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, VBAT, HT, memory, chipset
- CPU switching voltage regulator
|
LÜFTER | - Up to 3-fan status tachometer monitoring
- Up to three 4-pin fan headers
- Status Monitor für Geschwindigkeitskontrolle
- 3-pin fan support (w/o speed control)
- Geräuscharme Lüftergeschwindigkeits-Kontrolle (ausschließlich 4-Pin Lüfter)
- Pulsweitenmodulierte (PWM) Lüfter Anschlüsse
|
Temperatur | - Überwachung für CPU und Gehäuse Umgebung
- CPU Themal-Trip Unterstützung
- Thermal control for 8x Fan connectors
- I²C Temperatur-Messungs Logik
|
LED | - CPU / System Overheat LED
- +5 V Standby Alarm LED
|
Andere Features | - Gehäuse Zugriff Erkennung
- Gehäuse Zugriff Header
|
|
Betriebs-Umgebung / Compliance |
RoHS | RoHS Compliant 5/6, Pb Free |
Umgebungsbedingungen | - Betriebstemperatur: 10° bis 35 °C (50° bis 95 °F)
- Temperatur ohne Betrieb: -40° bis 70°C (-40° bis 158°F)
- Relative Luftfeuchtigkeit für Betrieb: 8% bis 90% (nicht kondensierend)
- Relative Luftfeuchtigkeit ohne Betrieb: 5% bis 95% (nicht kondensierend)
|
|
Betriebssystem Kompatibilität |
Please see our OS Compatibility Chart |
|
Regulatory |
FCC | Passed to meet FCC standard requirement |