|
Product SKUs |
MBD-H8DCT-F | H8DCT-F (Standard Retail Pack) |
|
Physical Stats |
Form Factor | Proprietary Form |
Dimensions | 6.5" x 16.64" (16.4cm x 42.3cm) |
|
Processor/Chipset |
CPU | - Dual 1207-pin Socket C32
- Supports two 8/6/4-Core ready AMD Opteron™ 4000 Series processors
- HT3.0 Link support
|
Chipset | AMD chipset SR5670 + SP5100 |
|
System Memory |
Memory Capacity | - 12 DIMM sockets
- Supports up to 192GB Registered ECC or 64GB Unbuffered ECC/non-ECC DDR3 1600/1333/1066 SDRAM in 12 DIMMs
- Dual channel memory bus
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
- See Detailed Memory Support Matrix
|
Memory Type | DDR3 1600/1333/1066 MHz Registered ECC or Unbuffered ECC/non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes | 1GB, 2GB, 4GB, 8GB, 16GB, 32GB |
Memory Voltage | 1.35V or 1.5V |
|
On-Board Devices |
SATA | AMD SP5100 (RAID 0, 1, 10) |
IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Winbond® WPCM450 BMC
|
Network Controllers | - Intel® 82576 controller, Dual-Port Gigabit Ethernet
- 10/100/1000BASE-T support
|
VGA | Matrox G200eW 16MB DDR2 |
Super I/O | Winbond® W83527 chip |
|
Input / Output |
SATA | 4x SATA (3Gb/s) ports |
LAN | - 2 RJ45 LAN ports
- 1 RJ45 Dedicated LAN supports IPMI
|
USB | - 4x USB 2.0 ports
- 2x Rear, 1x header (2 ports)
|
VGA | 1x VGA port |
Serial Ports | 1x Fast UART 16550 serial port |
Others | TPM header |
|
Expansion Slots |
PCI-E | 1 PCI-E 2.0 x16 |
|
Recommended Chassis |
1U Twin | SC808, SC809 |
|
Server(s) ( with H8DCT-F ) |
Model(s) | AS -2022TC-BTRF |
|
System BIOS |
BIOS Type | 16Mb SPI Flash ROM with AMI® BIOS |
BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- USB Keyboard Support
- SMBIOS 2.3
|
|
Management |
Software | - IPMI (Intelligent Platform Management Interface) 2.0
- Super Doctor III
|
Power Configurations | - ACPI Power Management
- Keyboard wakeup from soft-off
- Power-on mode control for AC power loss recovery
|
|
PC Health Monitoring |
CPU | - Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, VBAT, HT, memory, chipset
- CPU switching voltage regulator
|
FAN | - Up to 3-fan status tachometer monitoring
- Up to three 4-pin fan headers
- Status monitor for speed control
- 3-pin fan support (w/o speed control)
- Low noise fan speed control (4-pin fan only)
- Pulse Width Modulated (PWM) fan connectors
|
Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal control for 8x Fan connectors
- I²C temperature sensing logic
|
LED | - CPU / System Overheat LED
- +5 V Standby Alert LED
|
Other Features | - Chassis Intrusion Detection
- Chassis Intrusion Header
|
|
Operating Environment / Compliance |
RoHS | RoHS Compliant 5/6, Pb Free |
Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|
|
OS compatibility |
Please see our OS Compatibility Chart |
|
Regulatory |
FCC | Passed to meet FCC standard requirement |