|
Produkt-Artikelnummern |
MBD-H8DCL-iF | H8DCL-iF (Standard Retail Pack) |
|
Physische Werte |
Form Faktor | ATX |
Dimensionen | 12" x 10" |
|
Processor/Chipset |
CPU | - Dual 1207-pin Socket C32
- Supports two 8/6/4-Core ready AMD Opteron™ 4000 Series processors
- HT3.0 Link support
|
Chipsatz | AMD chipset SR5690 + SP5100 |
|
Arbeitsspeicher |
Speicherkapazität | - 8 DIMM sockets
- Supports up to 256GB Registered ECC or 64GB Unbuffered ECC/non-ECC DDR3 1600/1333/1066 SDRAM in 8 DIMMs
- Dual Kanal Memory Bus
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
- See Detailed Memory Support Matrix
|
Speicher Typ | Registered ECC or unb. ECC / non-ECC DDR3 1600/1333/1066 MHz SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Größen | 1GB, 2GB, 4GB, 8GB, 16GB, 32GB |
Speicherspannung | 1.35V or 1.5V |
|
On-Board Geräte |
SATA | AMD SP5100 (RAID 0, 1, 10) |
SAS | - LSI 2008 8 port SAS controller
- RAID 0, 1, 10; RAID 5 Optional
- Optional: AOC-SAS2-RAID5-KEYRAID 5 support
|
IPMI | - Unterstützung für Intelligent Platform Management Interface (IPMI) v.2.0
- IPMI 2.0 mit Virtual Media über LAN und KVM über LAN Unterstützung
- Winbond® WPCM450 BMC
|
Netzwerk Controller | - 2 Intel® 82574L single-port Gigabit Ethernet Controllers
- 10/100/1000BASE-T support
|
VGA | Matrox G200eW 16 MB DDR2 |
Super I/O | Winbond® W83527 chip |
|
Input / Output |
SATA | 6x SATA (3Gb/s) ports |
SAS | - Integrated LSI 1068E SAS Controller
- Eight Serial Attached SCSI (SAS) ports
- Each SAS port supports up to 4 SAS / SATA drives
|
LAN | - 2 RJ45 LAN Ports
- 1 RJ45 Dedicated LAN supports IPMI
|
USB | - 7x USB 2.0 Ports
- 2 rear, 1 Type-A, 2 headers for 4 ports
|
VGA | 1x VGA Port |
Serial Ports | 2x Fast UART 16550 serial port (one header & one port) |
Power | - SSI 24-pin + 8-pin + 8-pin power connectors / EPS12V
- Note: Two 8-pin connectors are required to support 2 CPUs due to SSI spec
|
Andere | 1 SATA DOM power connector, TPM header |
|
Erweiterungsslots |
PCI-E | - 1 PCI-E 2.0 x8 (in x16 slot)
- 3 PCI-E 2.0 x8
- 1 PCI-E 2.0 x4 (in x8 slot)
- 1 PCI
|
|
Chassis (Optimized for H8DCL-iF ) |
3U/Mid Tower | - CSE-835TQ-R920B
- CSE-936A-R900B
- CSE-936A-R1200B
- CSE-732i-500B
|
Tower/4U Rackmount | - CSE-743TQ-865B
- CSE-743TQ-865B-SQ
- CSE-743TQ-R760
- CSE-745TQ-800B
- CSE-745TQ-920B
- CSE-745TQ-R800B
- CSE-842TQ-665B
- CSE-846A-R1200B
- CSE-846E1-R900B
- CSE-846E16-R1200B
- CSE-846E2-R900
- CSE-846E26-R1200B
|
|
System BIOS |
BIOS Typ | 16Mb SPI Flash ROM with AMI® BIOS |
BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- USB Keyboard Unterstützung
- SMBIOS 2.3
|
|
Management |
Software | - IPMI (Intelligent Platform Management Interface) 2.0
- Super Doctor III
|
Leistungskonfigurationen | - ACPI Power Management
- Wake-On-LAN (WOL) Header
- Tastatur Wakeup aus Soft-Off
- Anschalt-Kontrolle für AC Stromverlust-Zurückgewinnung
|
|
PC Health Überwachung |
CPU | - Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, VBAT, HT, memory, chipset
- CPU switching voltage regulator
|
LÜFTER | - Up to 6-fan status tachometer monitoring
- Up to 6x 4-pin fan headers
- Status Monitor für Geschwindigkeitskontrolle
- 4-pin fan support (w/o speed control)
- Geräuscharme Lüftergeschwindigkeits-Kontrolle (ausschließlich 4-Pin Lüfter)
- Pulsweitenmodulierte (PWM) Lüfter Anschlüsse
|
Temperatur | - Überwachung für CPU und Gehäuse Umgebung
- CPU Themal-Trip Unterstützung
- Thermal control for 8x Fan connectors
- I²C Temperatur-Messungs Logik
|
LED | - CPU / System Overheat LED
- +5 V Standby Alarm LED
|
Andere Features | - Gehäuse Zugriff Erkennung
- Gehäuse Zugriff Header
|
|
Betriebs-Umgebung / Compliance |
RoHS | RoHS Compliant 5/6, Pb Free |
Umgebungsbedingungen | - Betriebstemperatur: 10° bis 35 °C (50° bis 95 °F)
- Temperatur ohne Betrieb: -40° bis 70°C (-40° bis 158°F)
- Relative Luftfeuchtigkeit für Betrieb: 8% bis 90% (nicht kondensierend)
- Relative Luftfeuchtigkeit ohne Betrieb: 5% bis 95% (nicht kondensierend)
|
|
Betriebssystem Kompatibilität |
Please see our OS Compatibility Chart |
|
Regulatory |
FCC | Passed to meet FCC standard requirement |