|
Produkt-Artikelnummern |
MBD-A1SA7-2750F -B | A1SA7-2750F (Bulk Pack) |
|
Physische Werte |
Form Faktor | Proprietary |
Dimensionen | 8.3" x 6.7" (21.08cm x 17.02cm) |
|
Prozessor/Cache |
CPU | - Intel® Atom? Processor C2750(formerly Avoton)
- CPU TDP 20W (8-Core)
- FCBGA 1283
- System-on-Chip
|
|
Arbeitsspeicher |
Speicherkapazität | - 4x 240-pin DDR3 UDIMM Sockel
- Supports up to 64GB DDR3 ECC or Non-ECC memory
|
Speicher Typ | 1600/1333 MHz ECC oder non-ECC UDIMM SDRAM, 240-pin goldbeschichtete DIMMs, nur x8 Breite |
DIMM Größen | 16 GB, 8 GB, 4 GB, 2 GB |
Speicherspannung | 1.5 V, 1.35 V |
|
On-Board Geräte |
SATA | - SoC controller for 1x SATA3 (6Gbps) port
- LSI® 2116 SW controller for 16x SATA3 (6Gbps) ports; SATA3 or SAS2 with IT mode
|
USB 2.0 | C2000 SoC |
IPMI | - Unterstützung für Intelligent Platform Management Interface (IPMI) v.2.0
- IPMI 2.0 mit Virtual Media über LAN und KVM über LAN Unterstützung
- Aspeed AST 2400 BMC
|
Video | Aspeed AST2400 BMC |
|
Input / Output |
Serial ATA | 17x SATA3 (6Gbps) ports |
LAN | - 2x RJ45 Gigabit Ethernet LAN Ports
- 1x RJ45 Dedicated IPMI LAN Port
|
USB | 3x USB 2.0 (2 rear, 1 Type A) |
Serial Port | 1x Fast UART 16550 Serial Port |
DOM | 1x SATA DOM (Disk on Module) Stromverbindung |
VGA | 1x VGA Port |
Andere | TPM 1.2 Header |
|
SuperServers Using A1SA7-2750F |
1U System | SSG-5018A-AR12L |
|
Chassis ( Optimized for A1SA7-2750F ) |
1 HE Gehäuse | - SC816LT-655B
- SC801LTQ-R406B
|
|
Erweiterungsslots |
PCI-Express | 1x PCI-E 2.0 x4 (in x8) Slot |
|
System BIOS |
BIOS Typ | 64 Mb SPI Flash EEPROM mit AMI UEFI BIOS |
BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- ACPI 5.0
- USB Tastatur Unterstützung
- SMBIOS 2.7.1
- UEFI
|
|
Management |
Software | - SuperDoctor® 5
- IPMI 2.0
- Watch Dog
- NMI
|
Leistungskonfigurationen | - ACPI / ACPM Power Management
- Hauptschalter Überbrückungsmechanismus
- Power-on Modus für Wechselstrom-Wiederherstellung
|
|
PC Health Überwachung |
Spannung | Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +5V Standby, VBAT, Memory Voltages. |
LÜFTER | - Total of 7x 4-pin fan headers
- 7x fans with tachometer status monitoring
- Status Monitor für Geschwindigkeitskontrolle
- Status Monitor für an/aus Kontrolle
- Lüfter Geschwindigkeitskontrolle für geringe Lautstärke
- Pulsweitenmodulierte (PWM) Lüfter Anschlüsse
|
Temperatur | - Überwachung für CPU und Gehäuse Umgebung
- CPU Thermal Trip Unterstützung
|
LED | System-Überhitzungs LED |
Andere Features | - Erkennung von unberechtigten Gehäuseöffnungen
- Chassis intrusion header
- Support shared IPMI with Supermicro proprietary 10GbE card AOC-STGN-i1SF
- Support Supermicro power built in SATA DOM
|
|
Operating Temperature |
0°C to 50°C |