|
Product SKUs |
MBD-X7DBU-B | X7DBU (Bulk Pack) |
|
Physical Stats |
Form Factor | Proprietary |
Dimensions | 12" x 13" (30.5cm x 33.2cm) |
|
Processor/Cache |
CPU | - Dual 771-pin LGA Sockets
- Supports up to two Intel 64-Bit Xeon processor(s) of the same type below:
- Quad-Core Intel XeonProcessor 5400/5300 sequence
- (Harpertown/Clovertown processor) up to 3.16 GHz
- Dual-Core Intel Xeon processor 5200/5100/5000 sequence (Wolfdale)
- (Woodcrest/Dempsey processor) up to 3.40 GHz
|
System Bus | 1333 / 1066 / 667 MHz system bus |
Operating System Software | - Supports 64-Bit Operating Systems
- Supports 32-Bit Operating Systems
|
|
System Memory |
Memory Capacity | - Eight 240-pin DIMM sockets
- Supports up to 32 GB 667 / 533 MHz DDR2 ECC FB-DIMM memory
- Dual branch memory bus
- Memory must be populated in pairs
- Memory Mirroring supported
|
Memory Type | 667 / 533 MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes | 256 MB, 512 MB, 1 GB, 2 GB, 4 GB |
Memory Voltage | |
|
On-Board Devices |
Chipset | - Intel 5000P (Blackford) chipset
- ESB2
|
Clock Generator | IDT CV152 |
SATA | - Intel ESB2 SATA 3.0 Gb/s controller
- RAID 0, 1, 5, 10 support (Windows Only)
- RAID 0, 1, 10 support (Linux)
|
IPMI | - Support for Intelligent Platform Management Interface v.2.0
- 200-pin IPMI slot (SIMSO)
- (Optional: AOC-SIMSO(+))
- For dedicated LAN, cable CBL-0177L must be used (cable sold separately)
|
Network Controllers | Intel (ESB2/Gilgal) 82563EB Dual-port Gigabit Ethernet controller |
Graphics | ATI ES1000 controller with 16 MB of video memory |
Super I/O | Winbond 83627HF chip |
|
Input / Output |
Serial ATA | Six Serial ATA ports |
IDE | - Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S)
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
Floppy | 1x Floppy controller; 1.44 MB, 2.88 MB |
LAN | 2x RJ45 LAN ports |
USB | - 2x USB rear ports
- 3x USB internal headers
- Total 5x USB 2.0 Compliant / 1.1 Compliant
|
VGA | 1x VGA Port |
Keyboard / Mouse | PS/2 keyboard and mouse ports |
Serial Port / Header | - 1x Fast UART 16550 serial port
- 1x Fast UART 16550 serial header
|
|
System BIOS |
BIOS Type | 8Mb Flash EEPROM with Phoenix BIOS |
BIOS Features | - Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
|
|
Chassis ( Optimized for X7DBU ) |
1U Chassis | CSE-113TQ-R650UB |
2U Chassis | CSE-825TQ-R700U |
Important Chassis Notes | - To ensure system stability, a 550W (minimum) ATX power supply
- [4-pin (+12V), 8-pin (+12V) and 20-pin are required]
|
|
Expansion Slots |
PCI-Express / PCI-X / UIO | - Left Side 1 (x8) PCI-Express &
- 1 UIO slot
- Right Side
- 1 64-bit 133MHz PCI-X or
- 1x (x8) PCI-Express
|
|
Management |
Software | - Optional IPMI (Intelligent Platform Management Interface) 1.5 / 2.0
- SuperDoctor® III
- Watch Dog
- NMI
|
Power Configurations | - ACPI Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Power-on mode for AC power recovery
- Internal / External modem remote ring-on
|
|
PC Health Monitoring |
Voltage | - Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory Voltage, Chipset Voltage
- 5-Phase-switching voltage regulator with auto-sense from 0.8375 V - 1.60 V
|
FAN | - Total of four 3-pin and four 4-pin fan headers supporting up to 8 fans
- 8x fans with tachometer status monitoring
- Status monitor for speed control
- Supports 3-pin speed control
- Pulse Width Modulated (PWM) fan connectors
|
Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x fan connectors
- PSU I²C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
LED | - CPU / System Overheat LED
- UID / Remote UID LED ( IPMI Only )
|
Other Features | - Chassis intrusion detection
- Chassis intrusion header
- SDDC Support
|
|
Operating Environment / Compliance |
RoHS | RoHS Compliant 5/6, Server Exemption |
Environmental Specifications | - Operating Temperature: 10° to 35 °C (50° to 95 °F)
- Non-operating temperature: -40° to 70 °C (-40° to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5 to 95% (non-condensing)
|
|
OS compatibility |
Please see our OS Compatibility Chart |
|
Regulatory |
FCC | Passed to meet FCC standard requirement |