| |
Product SKUs |
| SYS-6027TR-D71RF | SuperServer 6027TR-D71RF (Black) |
| |
Motherboard |
| Super X9DRT-HF |
| |
Processor/Cache |
| CPU | - Dual Socket R (LGA 2011)
- Intel Xeon processor E5-2600 and E5-2600 v2 family
- (up to 135 W TDP *)
- * Please contact your Supermicro sales representative for additional details
|
| Note | BIOS version 3.0 or above is required |
| Cache | Up to 30 MB |
| System Bus | QPI up to 8 GT/s |
| |
System Memory |
| Memory Capacity | - 8x 240-pin DDR3 DIMM sockets
- Up to 512 GB DDR3 ECC LRDIMM
- Up to 256 GB DDR3 ECC registered memory (RDIMM)
|
| Memory Type | 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 32 GB, 16 GB, 8 GB, 4 GB, 2 GB, 1 GB |
| Memory Voltage | 1.5 V, 1.35 V |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
On-Board Devices |
| Chipset | Intel C602 chipset |
| SAS | - LSI 2108 SAS (6 Gb/s) w/ Hardware RAID support
- RAID 0, 1, 5, 6, 10, 50, 60 support
- NOTE: In order to support the LSI RAID Controllers, both CPU socket must be populated
|
| SATA | SATA 2.0 & 3.0 with RAID 0, 1, 5, 10 |
| Network Controllers | - Intel i350 Dual port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| Graphics | Matrox G200eW |
| |
Input / Output (per Node) |
| Serial ATA | - 2x SATA 3.0 ports (6 Gb/s)
- 5x SATA 2.0 ports (3 Gb/s)
|
| SAS | 8x SAS-2 ports (6 Gb/s) |
| LAN | - 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB | 3x USB 2.0 ports total (2x rear + 1x Type A) |
| VGA | 1x VGA port |
| Serial Port / Header | 1x Fast UART 16550 port / 1 Header |
| |
Chassis |
| Form Factor | 2U Rackmount |
| Model | CSE-827HD-R1K28B |
| |
Dimensions |
| Width | 17.25" (438mm) |
| Height | 3.47" (88mm) |
| Depth | 28.5" (724 mm) |
| Gross Weight | 85 lbs (38.6kg) |
| Available Colors | Black |
| |
Front Panel |
| Buttons | - Power On/Off button
- System Reset button
- UID button
|
| LEDs | - Power status LED
- HDD activity LED
- 2x Network activity LEDs
- Universal Information (UID) LED
|
| |
Expansion Slots (per Node) |
| PCI-Express | 3x PCI-E 3.0 (x8) slots (1x Low-Profile and 2x Full-height Full-length) |
| |
Drive Bays (per Node) |
| Hot-Swap | 6x Hot-Swap 3.5" SATA-3/SAS-2 HDD trays |
| |
System Cooling |
| Fans | 4x 8 cm heavy duty PWM fans with optimal fan speed control |
| |
Power Supply |
| 1280 W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2 |
| AC Input | - 1000 W Output @ 100-140 V, 12-8 A, 50-60 Hz
- 1280 W Output @ 180-240 V, 8-6 A, 50-60 Hz
|
| DC Output | - 1000 W: +12 V / 83 A; +5 V sb / 4 A
- 1280 W: +12 V / 106.7 A, +5V sb / 4 A
|
| Certification | Platinum Certified |
| |
System BIOS |
| BIOS Type | 128 Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | - Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant |
| Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|
0 Artikel
