| |
Product SKUs |
| SYS-7046GT-TRF | SuperServer 7046GT-TRF (Black) |
| |
Motherboard |
| Super X8DTG-QF |
| |
Processor/Cache |
| CPU | - Dual 1366-pin LGA Sockets
- Supports up to two Intel 64-Bit Xeon processor(s) of the same type below:
- Intel Xeonprocessor 5600 Series (Westmere)
- Intel Xeonprocessor 5500 Series (Nehalem-EP)
|
| QPI | Up to 6.4 GT/s |
| |
System Memory |
| Memory Capacity | - 12x 240-pin DIMM sockets
- Supports up to 192 GB 1333 / 1066 / 800 MHz DDR3 ECC registered memory
- Supports up to 48 GB 1333 / 1066 / 800 MHz DDR3 ECC / Non ECC unbuffered memory
- Memory Mirroring supported
|
| Memory Type | 1333 / 1066 / 800MHz ECC registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | - 1GB, 2GB, 4GB
- , 8 GB
- , 16 GB
|
| Memory Voltage | 1.5 V / 1.35 V |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel x4 and x8 Single Device Data Correction (SDDC)
|
| |
On-Board Devices |
| Chipset | - Dual Intel 5520 (Tylersburg) chipset
- ICH10R
|
| SATA | - Intel ICH10R SATA 3.0 Gb/s controller
- RAID 0, 1, 5, 10 support
|
| Graphics | Matrox G200eW |
| Super I/O | Winbond 83827HF chip |
| |
Expansion Slots |
| PCI-Express | - 4x (x16) PCI-E 2.0 slots
- 2 (x4) PCI-E 2.0 (in x16 slots)
- 1x (x4) PCI-E (in x8 slot)
|
| PCI | 2x 33MHz PCI slots |
| |
Input / Output |
| Serial ATA | - Six Serial ATA ports
- Six SATA hard drives supported
|
| LAN | 2x RJ45 LAN ports |
| USB | - 4x USB rear ports
- 2x USB on-board
- 1x USB internal header - 2 ports
- Total 8x USB 2.0 Compliant
|
| VGA | 1x VGA Port |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Port / Header | - 1x Fast UART 16550 serial port
- 1x Fast UART 16550 serial header (Option)
|
| |
System BIOS |
| BIOS Type | 32Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | - Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
|
| |
Chassis |
| Form Factor | - 4U Rackmountable / Tower
- Optional Rackmount Kit
|
| Model | CSE-747TQ-R1400B |
| |
Dimensions |
| Height | 17.8" (452mm) |
| Width | 7" (178 mm) |
| Depth | 26.5" (673mm) |
| Gross Weight | 72 lbs (32.7 kg) |
| Package | 38.6" x 26.6" x 17.4" |
| Available Colors | Dark Gray |
| |
Front Panel |
| Buttons | - LED Power On/Off button
- System Reset button
|
| LEDs | - Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- Power Fail LED
|
| Ports | 2x Front side USB Ports |
| |
Drive Bays |
| Hot-Swap | - 8x 3.5" Hot-swap SAS/SATA Drive Bays
- Supports up to 6 SATA Drives
|
| Peripheral Bay(s) | - 3x 5.25" drive bays in storage module - rotates 90° for Rackmount
- rotates 90° for Rackmount
- 1x 3.5" fixed drive bay
|
| |
SAS / SATA Backplane |
| SAS / SATA Hard Drive Backplane with SES2 |
| |
System Cooling |
| Fans | - 4x 5000 RPM Hot-swap Cooling Fans
- 2x 5000 RPM Hot-swap Rear Exhaust Fan
|
| |
Power Supply |
| 1400 W high-efficiency (1+1) redundant power supply with PMBus |
| AC Input | - 1100 W Output @ 100-140 V, 13.5-9.5 A, 50-60 Hz
- 1400 W Output @ 180-240 V, 9.5-7.0 A, 50-60 Hz
|
| DC Output | - 1100 W: +12 V / 92 A; +5V sb / 4 A
- 1400 W: +12 V / 116 A; +5 V sb / 4 A
|
| With Distributor | - +5 V: 30 A
- +3.3V: 24 A
- -12V: 0.6 A
|
| Certification | Gold Certified |
| |
PC Health Monitoring |
| CPU | - Monitors for CPU Cores, +1.8V, +3.3V, +5V, 12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
- 6-Phase-switching voltage regulator
|
| FAN | - Total of eight fan headers supporting up to 8 fans
- Eight 4-pin fan headers
- 8x fans with tachometer status monitoring
- Supports 3-pin fans (w/o speed control)
- Low noise fan speed control
|
| Temperature | - Monitoring for CPU and chassis environment
- Thermal Control for 8x fan connectors
- PECI
|
| Other Features | - Chassis intrusion detection
- Chassis intrusion header
|
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant |
| Environmental Specifications | - Operating Temperature: 10° to 35 °C (50° to 95 °F)
- Non-operating temperature: -40° to 70 °C (-40° to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5 to 95% (non-condensing)
|
0 Artikel
