| |
Product SKUs |
| SYS-6025B-TR+V | SuperServer 6025B-TR+V (Silver) |
| SYS-6025B-TR+B | SuperServer 6025B-TR+B (Black) |
| |
Motherboard |
| Super X7DBE+ |
| |
Processor/Cache |
| CPU | - Dual 771-pin LGA Sockets
- Supports up to two Intel 64-Bit Xeon processor(s) of the same type below:
- Quad-Core Intel XeonProcessor 5400/5300 sequence
- (Harpertown/Clovertown processor) up to 3.16 GHz
- Dual-Core Intel Xeon processor 5200/5100/5000 sequence (Wolfdale)
- (Woodcrest/Dempsey processor) up to 3.40 GHz
- NOTE: Motherboard PCB revision 2.0 or above is required to support Xeon 5100 (Woodcrest) processors
|
| System Bus | 1333 / 1066 / 667 MHz system bus |
| Operating System Software | - Supports 64-Bit Operating Systems
- Supports 32-Bit Operating Systems
|
| |
System Memory |
| Memory Capacity | - Sixteen 240-pin DIMM sockets
- Supports up to 64 GB 667 / 533 MHz DDR2 ECC FB-DIMM memory
- Dual branch memory bus
- Memory must be populated in pairs
- Memory Mirroring supported
|
| Memory Type | 667 / 533 MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 512 MB, 1GB, 2GB, 4GB |
| Memory Voltage | |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel x4 and x8 Single Device Data Correction (SDDC)
|
| |
On-Board Devices |
| Chipset | - Intel 5000P (Blackford) chipset
- MCH + PXH + ESB2
|
| SATA | - Intel ESB2 SATA 3.0 Gb/s controller
- RAID 0, 1, 5, 10 support (Windows Only)
- RAID 0, 1, 10 support (Linux)
|
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- 200-pin IPMI slot (SIMLP)
- (Optional: AOC-SIMLP-B(+))
- (Optional: AOC-SIMLP-3(+)) with 3rd LAN support
|
| Network Controllers | - Intel (ESB2/Gilgal) 82563EB Dual-port Gigabit Ethernet controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
- Intel I/OAT support for fast, scaleable, and reliable networking
|
| Graphics | ATI ES1000 controller with 16 MB of video memory |
| Super I/O | Winbond 83627HG chip |
| |
Input / Output |
| Serial ATA | - Six Serial ATA ports
- Six SATA hard drives supported
|
| IDE | - Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card
- Compact Flash (40-pin connector, IDE 1, single channel) slot
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
| Floppy | 1x Floppy controller; 1.44 MB, 2.88 MB |
| LAN | 2x RJ45 LAN ports |
| USB | - 2x USB rear ports
- 3x USB internal headers
- Total 5x USB 2.0 Compliant / 1.1 Compliant
|
| VGA | 1x VGA Port |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Port / Header | - 1x Fast UART 16550 serial port
- 1x Fast UART 16550 serial header
|
| Parallel Port | 1x ECP / EEP parallel port |
| |
System BIOS |
| BIOS Type | 8Mb Flash EEPROM with Phoenix BIOS |
| BIOS Features | - Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.1
- PCI 2.2
- ACPI 1.0
- USB Keyboard support
- Hardware BIOS Virus protection
|
| |
Chassis |
| Form Factor | 2U Rackmount |
| Model | SC825TQ-R700LPV |
| |
Dimensions |
| Height | 3.5" (89mm) |
| Width | 17.2" (437mm) |
| Depth | 25.5" (648 mm) |
| Gross Weight | 55 lbs (24.9kg) |
| Available Colors | Silver, Black |
| |
Front Panel |
| Buttons | - Power On/Off button
- System Reset button
|
| LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat / Fan Failure LED
- Power fail LED
|
| Ports | 2x USB Ports + DB9 COM Port (optional) |
| |
Expansion Slots |
| PCI-Express | - 2 (x8) PCI-e slots
- 1x (x4) PCI-e (using x8) slot
|
| PCI-X | - 2x 64-bit 133MHz PCI-X (3.3V) slots
- 1x 64-bit 100MHz PCI-X (3.3V) slot
|
| |
Drive Bays |
| Hot-Swap | - 8x 3.5" SATA Hot-swap drive trays
- Supports up to 6x SATA hard drives
|
| |
Peripheral Drives |
| DVD-ROM | Slim 8x DVD, 24x CD, DVD-ROM Drive |
| Floppy | Slim 1.44MB Floppy Drive (Optional) |
| |
SATA Backplane |
| 1x 2U SATA backplane |
| |
System Cooling |
| Fans | 3x 80 mm 6300 RPM fans |
| Shroud | 1x Air Shroud |
| |
Power Supply |
| 700 W (1 + 1) Redundant AC-DC high-efficiency power supply w/ PFC |
| AC Voltage | 100 - 240 V, 60-50 Hz, 10 - 4 A |
| +5 V standby | 4 A |
| +12 V | 57 A |
| With Power Distributor | - +5 V: 30 A
- +3.3V: 24 A
- -12V: 0.6 A
|
| |
PC Health Monitoring |
| CPU | - Monitors for CPU Cores, +3.3V, +5V, 12V, +1.2V
- 5-Phase-switching voltage regulator with auto-sense from 0.8375 V - 1.60 V
|
| FAN | - Total of four 3-pin and four 4-pin fan headers supporting up to 8 fans
- 8x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x fan connectors
- PSU I²C temperature sensing logic
- Thermal Monitor 2 (TM2) support
|
| LED | CPU / System Overheat LED |
| Other Features | - Chassis intrusion detection
- Chassis intrusion header
- SDDC Support
|
| |
Operating Environment / Compliance |
| Environmental Specifications | - Operating Temperature: 10° to 35 °C (50° to 95 °F)
- Non-operating temperature: -40° to 70 °C (-40° to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5 to 95% (non-condensing)
|
0 Artikel
