|
Product SKUs |
SYS-1028GQ-TXRT | SuperServer 1028GQ-TXRT (Black) |
|
Motherboard |
Super X10DGQ |
|
Processor/Cache |
CPU | - Intel® Xeon® processor E5-2600 v4/
- v3 family
- (up to 145W TDP)
- *
- Dual Socket R3 (LGA 2011)
|
Cores / Cache | Up to 22 Cores / Up to 55MB Cache |
System Bus | QPI up to 9.6 GT/s |
Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
|
System Memory |
Memory Capacity | - 16x 288-pin DDR4 DIMM slots
- Up to 2TB ECC 3DS LRDIMM, 1TB ECC RDIMM
|
Memory Type | 2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
DIMM Sizes | - RDIMM:
- 64GB, 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64 GB, 32 GB
- 3DS LRDIMM: 128GB
|
Memory Voltage | 1.2 V |
Error Detection | Corrects single-bit errors |
|
On-Board Devices |
Chipset | Intel® C612 chipset |
SATA | SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- ASPEED AST2400 BMC
|
Network Controllers | - Intel X540 Dual port 10GBase-T
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
Graphics | ASPEED AST2400 BMC |
|
Input / Output |
SATA | 6 SATA3 (6Gbps) ports |
LAN | - 2 RJ45 10GBase-TEthernet ports
- 1x RJ45 Dedicated IPMI LAN port
|
USB | 2 USB 3.0 ports (2 via headers) |
Video | 1x VGA Connector |
Serial Port | 1x Serial header |
|
System BIOS |
BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS |
BIOS Features | - Plug and Play (PnP)
- APM 1.2
- DMI 2.3
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI
|
|
Chassis |
Form Factor | 1U Rackmount |
Model | CSE-118GQP-R2K05B |
|
Dimensions and Weight |
Height | 1.7" (43 mm) |
Width | 17.2" (437mm) |
Depth | - 35.2" (894mm)
- 39.3" (997mm) with rails
|
Package | 24" (H) x 8" (W) x 46" (D) |
Weight | - Net Weight: 45 lbs (15.9 kg)
- Gross Weight: 58 lbs (21.8 kg)
|
Available Colors | Black |
|
Front Panel |
Buttons | - Power On/Off button
- System Reset button
|
LEDs | - Power LED
- Hard drive activity LED
- 2 Network activity LEDs
- System Overheat LED / Fan fail LED / UID LED
|
|
Expansion Slots |
PCI-Express | - 3 PCI-E 3.0 x16 slots
- 1 PCI-E 3.0 x8 low-profile slot
|
|
Drive Bays |
Hot-Swap | 2x 2.5" Hot-swap drive bays |
Fixed | 2x 2.5" internal drive bays |
|
System Cooling |
Fans | 8x 4cm heavy duty counter-rotating fans with air shroud & optimal fan speed control |
|
Power Supply |
2000W Redundant Power Supplies with PMBus |
Total Output Power | 1000W/1800W/1980W/2000W |
Dimension(W x H x L) | 73.5 x 40 x 265 mm |
Input | - 100-120Vac / 12-9.5A / 50-60Hz
- 200-220Vac / 10-9.5A / 50-60Hz
- 220-230Vac / 10-9.8A / 50-60Hz
- 230-240Vac / 10-9.8A / 50-60Hz
- 200-240Vac / 11.8-9.8A / 50-60Hz (UL/cUL only)
|
+12 V | - Max: 83.3A / Min: 0A (100-120Vac)
- Max: 150A / Min: 0A (200-220Vac)
- Max: 165A / Min: 0A (220-230Vac)
- Max: 166.7A / Min: 0A (230-240Vac)
- Max: 166.7A / Min: 0A (200-240Vac) (UL/cUL only)
|
12Vsb | Max: 2.1A / Min: 0A |
Output Type | 25 Pairs Gold Finger Connector |
Certification | UL/cUL/CB/BSMI/CE/CCC Titanium Level |
|
PC Health Monitoring |
CPU | - Monitors for CPU Cores, +1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.
- 5 Phase-switching voltage regulator
|
FAN | - Total of eight 4-pin PWM fans
- 8 fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
|
Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8 Fan Connectors
- PSU I²C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
LED | - Power Fail / Overheat LED
- Supsend-State Indicator LED
- UID LED
|
Other Features | SDDC Support |
|
Operating Environment / Compliance |
RoHS | RoHS Compliant |
Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|