|
Produkt-Artikelnummern |
SYS-7048R-C1RT | SuperServer 7048R-C1RT (Black) |
|
Mainboard |
Super X10DRH-CT |
|
Prozessor/Cache |
CPU | - Intel® Xeon® processor E5-2600 v3 family
- (up to 145W TDP **)
- Dual Socket R3 (LGA 2011)
|
Cores / Cache | Up to 18 Cores / Up to 45MB Cache |
System Bus | QPI bis zu 9.6 GT/s |
Hinweis | ** Please contact your Supermicro sales representative for additional details. |
|
Arbeitsspeicher |
Speicherkapazität | - 16x 288-pin DDR4 DIMM sockets
- Up to 1TB ECC LRDIMM, 512GB ECC RDIMM
|
Speicher Typ | 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
DIMM Größen | - RDIMM: 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64 GB, 32 GB
|
Speicherspannung | 1.2 V |
Fehlererkennung | - Korrigiert Einzel-Bit Fehler
- Entdeckt Zwei-Bit Fehler (mit ECC Speicher)
|
|
On-Board Geräte |
Chipsatz | Intel® C612 Express chipset |
SATA | SATA3 (6Gbps); RAID 0, 1, 5, 10 |
SAS | LSI 3108 SAS3 (12Gbps) Controller; HW RAID 0, 1, 5, 6, 10, 50, 60 |
IPMI | - Unterstützung für Intelligent Platform Management Interface (IPMI) v.2.0
- IPMI 2.0 mit Virtual Media über LAN und KVM über LAN Unterstützung
- ASPEED AST2400 BMC
|
Netzwerk Controller | - Intel® X540 10GBase-T
- Virtual Machine Device Queues reduzierter I/O overhead
- Unterstützt 10GBASE-T, 100BASE-TX und 1000BASE-T, RJ45 Output
- 1x Realtek RTL8201N PHY (Dedicated IPMI)
|
Video | ASPEED AST2400 BMC |
|
Input / Output |
SATA | 8x SATA3 (6Gbps) Ports |
SAS | 8x SAS-3 (12 Gb/s) Ports |
LAN | - 2x RJ45 10GBase-T Ports
- 1x RJ45 Dedicated IPMI LAN Port
|
USB | - 2x USB 3.0 Ports (2x Rückseite)
- 4x USB 2.0 Ports (2 Rückseite, 2 Front)
- 1x USB Type A
|
Video | 1x VGA Port |
Serieller Port / Header | 1x COM/Serial |
DOM | 2x SuperDOM (Disk on Module) Ports |
|
Erweiterungsslots |
PCI-Express | - 1x PCI-E 3.0 x16 (Full-height, Full-length)
- 6x PCI-E 3.0 x8 (Full-height, Full-length)
|
|
System BIOS |
BIOS Typ | 128 Mb SPI Flash EEPROM mit AMI BIOS |
BIOS Features | - Plug and Play (PnP)
- APM 1.2
- DMI 2.2
- ACPI 1.0 / 2.0
- USB Tastatur Unterstützung
- SMBIOS 2.3
- UEFI
|
|
Gehäuse |
Form Faktor | - 4 HE Rackmountable / Tower
- optionales Rackmount Kit
|
Model | CSE-745TQ-R920B |
|
Maße und Gewicht |
Höhe | 17.2" (437mm) |
Breite | 7.0" (178 mm) |
Tiefe | 25.5" (648 mm) |
Packung | 24" (H) x 14" (W) x 26.5" (D) |
Gewicht | - Net Weight: 56.5 lbs (25.6 kg)
- Gross Weight: 74 lbs (33.57 kg)
|
Verfügbare Farben | Schwarz |
|
Frontabdeckung |
Knöpfe | - Stromschalter
- System-Reset Schalter
|
LEDs | - Strom LED
- Festplatten-Aktivitäts LED
- 2x Netzwerk Aktivitäts LEDs
- System-Überhitzungs LED
- Power Fail LED
|
Ports | 2x USB Ports |
|
Laufwerkschächte |
Hot-Swap | - 8x 3.5" Hot-swap SATA3 drive trays
- 8x 2.5" Hot-swap SAS3 drives in mobile rack
|
Periphärer Schacht | 1x 5.25" drive bay (optional devices) |
|
SAS / SATA Backplane |
- SAS via backplane (BPN-SAS3-I28A) in Mobile rack
- SATA via chassis HDD Backplane CSE-SAS-743TQ-O-P
|
|
Systemkühlung |
Lüfter | - 3x 8cm Hot-swap redundant PWM Cooling Fans
- 2x 8cm Hot-swap Rear Exhaust PWM Fans & air shroud
|
|
Netzteil mit Power Distributor |
Redundante 920 W Hocheffizienz (94%+) AC-DC Netzteile mit PMBus und I²C |
AC Input | 100-240 V, 50-60 Hz, 11-4.5 A |
DC Output | - 4 A @ +5 V Standby
- 75 A @ +12 V
|
Zertifikat | Platinum zertifiziert |
|
PC Health Überwachung |
CPU | - Monitore für CPU Kerne, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Speicher, Chipsatz Spannungen
- 6-Phasen Spannungs-Regulierung
|
LÜFTER | - Total of five fan headers supporting up to 5 fans
- 5x Lüfter mit Tachometer-Status Überwachung
- Status Monitor für Geschwindigkeitskontrolle
- Pulsweitenmodulierte (PWM) Lüfter Anschlüsse
|
Temperatur | - Überwachung für CPU und Gehäuse Umgebung
- CPU Thermal Trip Unterstützung
- Temperatur-Kontrolle für 5x Lüfter-Konnektoren
- Thermal Monitor 2 (TM2) Unterstützung
- PECI
|
LED | - System Info. LED: UID Indikator, Lüfter-Ausfall/System-Überhitzung
- Suspend-Status Indikator-LED
- UID/Fernsteuerungs-LED
|
Andere Features | - Erkennung von unberechtigten Gehäuseöffnungen
- Chassis intrusion header
|
|
Betriebs-Umgebung / Compliance |
RoHS | RoHS konform |
Umgebungsbedingungen | - Betriebstemperatur: 10° bis 35 °C (50° bis 95 °F)
- Temperatur ohne Betrieb: -40° bis 70°C (-40° bis 158°F)
- Relative Luftfeuchtigkeit für Betrieb: 8% bis 90% (nicht kondensierend)
- Relative Luftfeuchtigkeit ohne Betrieb: 5% bis 95% (nicht kondensierend)
|