|
Produkt-Artikelnummern |
MBD-H8QI6-F-O | H8QI6-F (Standard Retail Pack) |
MBD-H8QI6-F-B | H8QI6-F (Bulk Pack) |
|
Physische Werte |
Form Faktor | Proprietary |
Dimensionen | 16.4" x 13" (41.7cm x 33.0cm) |
|
Processor/Chipset |
CPU | - Quad 1207-pin Socket F
- Supports up to four Six-Core / Quad-Core AMD Opteron™ 8000 Series processors**
- HT3.0 Link support
|
Chipsatz | Dual AMD SR5690 + SP5100 Chipset |
|
Arbeitsspeicher |
Speicherkapazität | - Sechzehn 240-pin DIMM Sockel
- Support up to 128GB memory
- Dual channel memory bus; Single or Dual (recommended) channel memory support
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
|
Speicher Typ | DDR2 800/667/533 MHz Registered ECC SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Größen | 256 MB, 512 MB, 1GB, 2GB, 4GB, 8GB |
Speicherspannung | 1.8 V ausschließlich |
|
On-Board Geräte |
SATA | AMD SP5100 (RAID 0, 1, 10) |
SAS | - LSI 2008 8 port SAS2 controller
- RAID 0, 1, 10; RAID 5 Optional
- Optional: AOC-SAS2-RAID5-KEY
- RAID 5 support
|
IPMI | - Unterstützung für Intelligent Platform Management Interface (IPMI) v.2.0
- IPMI 2.0 mit Virtual Media über LAN und KVM über LAN Unterstützung
- Winbond® WPCM450 BMC
|
Netzwerk Controller | - Intel® 82576 controller, Dual-Port Gigabit Ethernet
- 10/100/1000BASE-T support
|
VGA | Matrox G200eW 16 MB DDR2 Grafik |
Super I/O | Winbond® 83627DHG chip |
|
Input / Output |
SATA | 6x SATA2.0 (3Gb/s) Ports |
SAS | - Integrated LSI 2008 SAS2 Controller
- Eight Serial Attached SCSI (SAS) ports
- 8x 6 Gb/s SAS / SATA Ports
|
IDE | - Single EIDE channel support up to two UDMA IDE devices
- Supports UDMA Mode 5
- Supports PIO Mode 4
- Supports ATA 100/133
|
LAN | - 2 RJ45 LAN Ports
- 1 RJ45 Dedicated LAN supports IPMI
|
USB | - 6x USB 2.0 ports
- 2x Rear / 2x header / 2x type A
|
VGA | 1x VGA Port |
Tastatur / Maus | PS/2 Keyboard und Maus Ports |
Serial Ports | - 1x Fast UART 16550 serieller Port
- 1x serial port header
|
Andere | 1 SATA DOM power connector |
|
Erweiterungsslots |
PCI-Express | - 3x PCI-e 2.0 x16
- 1x PCI-e 2.0 x8
- 2x PCI-e 2.0 x4 (in x8 slot)
- 1x UIO Slot
|
|
Chassis ( Optimized for H8QI6-F ) |
1 HE Gehäuse | CSE-818TQ-1400B |
2 HE Gehäuse | - CSE-828TQ+-R1400LPB
- (rev. K required Air Shroud MCP-310-82801-0N)
|
|
System BIOS |
BIOS Typ | 16Mb SPI Flash ROM with AMI® BIOS |
BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- USB Keyboard Unterstützung
- SMBIOS 2.3
|
|
Management |
Software | - IPMI (Intelligent Platform Management Interface) 2.0
- Super Doctor III
|
Leistungskonfigurationen | - ACPI Power Management
- Wake-On-LAN (WOL) Header
- Tastatur Wakeup aus Soft-Off
- Anschalt-Kontrolle für AC Stromverlust-Zurückgewinnung
|
|
PC Health Überwachung |
CPU | - Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, VBAT, HT, memory, chipset
- CPU switching voltage regulator
|
LÜFTER | - Up to 9-fan status tachometer monitoring
- Up to nine 4-pin fan headers
- Status Monitor für Geschwindigkeitskontrolle
- 3-pin fan support (w/o speed control)
- Geräuscharme Lüftergeschwindigkeits-Kontrolle (ausschließlich 4-Pin Lüfter)
- Pulsweitenmodulierte (PWM) Lüfter Anschlüsse
|
Temperatur | - Überwachung für CPU und Gehäuse Umgebung
- CPU Themal-Trip Unterstützung
- Thermal control for 9x fan connectors
- I²C Temperatur-Messungs Logik
|
LED | - CPU / System Overheat LED
- +5 V Standby Alarm LED
|
Andere Features | - Gehäuse Zugriff Erkennung
- Gehäuse Zugriff Header
|
|
Betriebs-Umgebung / Compliance |
RoHS | RoHS kompatibel 5/6, Server Ausnahme |
Umgebungsbedingungen | - Betriebstemperatur: 10° bis 35 °C (50° bis 95 °F)
- Temperatur ohne Betrieb: -40° bis 70°C (-40° bis 158°F)
- Relative Luftfeuchtigkeit für Betrieb: 8% bis 90% (nicht kondensierend)
- Relative Luftfeuchtigkeit ohne Betrieb: 5% bis 95% (nicht kondensierend)
|
|
Betriebssystem Kompatibilität |
Please see our OS Compatibility Chart |
|
Regulatory |
FCC | Passed to meet FCC standard requirement |