| |
Produkt-Artikelnummern |
| MBD-H8DA8-O | H8DA8 (Standard Retail Pack) |
| MBD-H8DA8-B | H8DA8 (Bulk Pack) |
| |
Physische Werte |
| Form Faktor | Extended ATX |
| Dimensionen | 12" x 13.05" (30.5cm x 33.2cm) |
| |
Processor/Chipset |
| CPU | - Dual 940-pin ZIF Sockets
- Supports up to two Dual-Core AMD Opteron™ 200 Series processor(s)
- VRM x3
|
| Chipsatz | - AMD 8131 HyperTransport PCI-X Tunnel
- AMD 8111 HyperTransport I/O Hub
|
| |
Arbeitsspeicher |
| Speicherkapazität | - Eight 184-pin DIMM sockets support:
- Up to 16 GB DDR 400 MHz memory OR
- Up to 32 GB DDR 333 MHz memory OR
- Up to 32 GB DDR 266 MHz memory
- Single or Dual (recommended) channel memory support
- For Single CPU: Memory must be populated in CPU1 DIMMs only
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
|
| Speicher Typ | DDR 400/333/266MHz buffered (registered) ECC SDRAM 72-bit, 184-pin gold-plated DIMMs |
| DIMM Größen | 256 MB, 512 MB, 1 GB, 2 GB, 4 GB** |
| Speicherspannung | 2.5 V ausschließlich |
| Fehlererkennung | - Korrigiert Einzel-Bit Fehler
- Entdeckt Zwei-Bit Fehler (mit ECC Speicher)
|
| |
On-Board Geräte |
| SCSI | - Adaptec AIC-7902W Controller
- Dual-Channel Ultra320 SCSI with Host RAID (Host RAID only supports 4 drives)
- Host RAID 0, 1, 10, JBOD
|
| Zero Channel RAID | - Support for Zero-Channel RAID with Adaptec 2010S SCSI ZCR Card
- (Karte nicht enthalten)
|
| IPMI | - 1U and 3U support for Intelligent Platform Management Interface v.2.0 (Optional: 1UIPMI-B)
- 2U and 4U support for Intelligent Platform Management Interface v.2.0, Low Profile (Optional: AOC-LPIPMI-LANG)
- RMM (Fernverwaltung Module)
- (Karte nicht enthalten)
|
| Netzwerk Controller | - Broadcom® 5704 Dual Port Gigabit Ethernet Controller
- Unterstützt 10BASE-T, 100BASE-TX, und 1000BASE-T; RJ45 Ausgang
|
| VGA | ATI Rage XL 8MB PCI Graphics Controller |
| |
Erweiterungsslots |
| PCI-X | - 2 64-bit 133/100MHz PCI-X (3.3V) slots
- 2 64-bit 66MHz PCI-X (3.3V) slots
|
| PCI | 2 32-bit 33MHz PCI (5V) slots |
| IPMI | IPMI 2.0 expansion slot |
| |
Chassis ( Optimized for H8DA8 ) |
| 2 HE Gehäuse | - SC823S-550LP *
- SC823S-R500LP *
- * Please use air-shroud CSE-PT0083
- (Air-shrouds sold separately)
|
| 3 HE Gehäuse | - SC833S-R760
- SC833S-550
- SC933S1-R760
- SC933S2-R760
|
| Rackmount Tower / 4U | |
| Wichtige Gehäuse Hinweise | To ensure system stability, a 420W (minimum) ATX power supply [ 8-pin (+12V) and 24-pin are required] |
| |
System BIOS |
| BIOS Typ | 4Mb Flash EEPROM with AMI® BIOS |
| BIOS Features | - Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.3
- ACPI 2.0
- Lüfter-Geschwindigkeitskontrolle
|
| |
Input / Output |
| IDE | Dual ATA 133/100 EIDE channels support up to four UDMA IDE devices |
| Floppy | 1 Floppy port; 1.44 MB, 2.88 MB, 3-mode support |
| LAN | 2 RJ45 LAN Ports |
| USB | - FUCI
- Up to 5 USB Ports 1.1 Compliant
|
| Tastatur / Maus | PS/2 Keyboard und Maus Ports |
| Serial Ports | 2x Fast UART 16550 serielle Ports |
| |
Management |
| Software | - Optional IPMI (Intelligent Platform Management Interface) 2.0
- Super Doctor III
- Watch Dog
|
| Leistungskonfigurationen | - ACPI/API Power Management
- Wake-On-LAN (WOL) Header
- Anschalt-Kontrolle für AC Stromverlust-Zurückgewinnung
- Internal/External modem remote ring-on
|
| |
PC Health Überwachung |
| CPU | - Monitors CPU Core Voltages, +3.3V, +5V, ±12V & +3.3V Standby, +5V Standby, HyperTransport voltage 1.2V, memory voltage 2.5V, DDR termination 1.25V, chipset voltage 1.8V
- Up to 8 fan status
- Supports System Management Utility
|
| LÜFTER | - Total up to 8-fan status
- 3-pin fan speed control or
- 4-pin Pulse Width Modulated (PWM) fan connector
|
| Temperatur | Überwachung für CPU und Gehäuse Umgebung |
| LED | Overheat LED |
| Andere Features | Gehäuse Zugriff Header |
| |
Betriebssystem Kompatibilität |
| Please see our OS Compatibility Chart |
| |
Regulatory |
| FCC | Passed to meet FCC standard requirement |
0 Artikel
