| |
Produkt-Artikelnummern |
| AS-4041M-T2R | A+ Server 4041M-T2R (Beige) |
| AS-4041M-T2RB | A+ Server 4041M-T2RB (Black) |
| |
Mainboard |
| Super H8QME-2 |
| |
Processor/Chipset |
| CPU | - Quad 1207-pin Socket F
- Supports up to four Six-Core AMD Opteron™ 8000 Series (Socket F) processors
- HT3.0 Link support
|
| Chipsatz | |
| |
Arbeitsspeicher |
| Speicherkapazität | - Sechzehn 240-pin DIMM Sockel
- Supports up to 128GB of DDR2 800/667/533/400 MHz SDRAM
- Single or Dual (recommended) channel memory support
- For Quad CPUs: Recommended that memory be populated equally in adjacent memory banks
|
| Speicher Typ | DDR2 800/667/533/400MHz buffered (registered) ECC SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Größen | 256MB, 512MB, 1GB, 2GB, 4GB, 8GB |
| Speicherspannung | 1.8 V ausschließlich |
| Fehlererkennung | - Korrigiert Einzel-Bit Fehler
- Entdeckt Zwei-Bit Fehler (mit ECC Speicher)
|
| |
On-Board Geräte |
| SATA | - nVidia MCP55 Pro SATA2 3.0Gbps Controller
- 6 SATA2 Ports
- nVidia RAID 2.0
- SATA RAID 0, 1, 0+1, 5 JBOD Support
|
| IPMI | - Intelligent Platform Management Interface v2.0 (Optional: AOC-SIMSO R3.00)
- 200-Pin IPMI Slot (SIMSO)
- NOTIZ: KVM-over-LAN nicht unterstützt - Es wird kein DVO Signal zu dem IPMI Slot gesendet
- RMM (Fernverwaltung Module)
- (Karte nicht enthalten)
- Für Dedicated LAN muss Kabel CBL-0177L benutzt werden (Kabel separat erhältlich)
|
| Netzwerk Controller | - Intel® 82546GB Dual Port Gigabit Ethernet Controller
- Unterstützt 10BASE-T, 100BASE-TX, und 1000BASE-T; RJ45 Ausgang
|
| Super I/O | Winbond 83627HF |
| VGA | ATI ES1000 Graphics Controller |
| |
Input / Output |
| SATA | 6 SATA2 ports |
| IDE | - Single EIDE channel support up to two UDMA IDE devices
- Supports UDMA Mode 5
- Supports PIO Mode 4
- Supports ATA 100/133
|
| Floppy | 1 Floppy port; 1.44 MB support |
| LAN | 2 RJ45 LAN Ports |
| USB | - FUCI
- Up to 4 USB Ports 2.0 Compliant
- 2 Rear Ports
- 2 Internal Headers
|
| Tastatur / Maus | PS/2 Keyboard und Maus Ports |
| Serial Ports | - 1x Fast UART 16550 Serial Port
- 1x Header
|
| Paralleler Port | 1 ECP / EPP parallel port |
| VGA | 1x VGA Port |
| |
Gehäuse |
| Form Faktor | - Tower / 4 HE Rackmountbar
- Optional Rackmount Kit (MCP-290-00001-00)
|
| Model | SC748TQ-R1000 |
| |
Dimensionen |
| Höhe | 7.0" (178 mm) |
| Breite | 17.8" (452mm) |
| Tiefe | 29.4" (746 mm) |
| Bruttogewicht | 87 lbs (39.5 kg) |
| Verfügbare Farben | Beige, Schwarz |
| |
Frontabdeckung |
| Knöpfe | - Stromschalter
- System-Reset Schalter
|
| LEDs | - Strom LED
- Festplatten-Aktivitäts LED
- 2x Netzwerk Aktivitäts LEDs
- System-Überhitzung / Lüfter-Ausfall LED
- Power Fail LED
|
| Ports | 2x USB Ports |
| |
Laufwerkschächte |
| Hot-Swap | 5 x 3.5" Hot-swap SATA Drive Trays |
| Periphäre Laufwerkschächte | 3x 5.25" Periphere Laufwerk-Schächte |
| |
Preiphere Laufwerke |
| Floppy | 3.5" 1.44 MB Floppy Laufwerk |
| |
Erweiterungsslots |
| PCI-Express | - 1 x16 PCI-e / HTX Slot*
- 1x (x8) PCI-e Slot
|
| PCI-X | - 2 64-bit 133/100MHz PCI-X (3.3V) slots
- 2 64-bit 100MHz PCI-X (3.3V) slot
|
| |
SATA Backplane |
| SATA Festplatten Backplane |
| |
Systemkühlung |
| Lüfter | - 3x 5.000 UPM Hot-Swap Kühlungslüfter
- 3x 5.000 UPM Hot-Swap rückseitige Abzugslüfter
|
| Hüllen | 1x Luftkanal |
| |
Netzteil |
| 1000 W AC-DC Hocheffizienz Netzteil mit PFC und PDB |
| AC Spannung | 100 - 240 V, 50 - 60 Hz, 15 - 7 A |
| +5 V Standby | 4 A |
| +12 V | 83 A |
| Mit Power Distributor | - +5 V: 20 A
- +3.3 V: 20 A
- -12V: 0.6 A
|
| |
PC Health Überwachung |
| CPU | - Monitors CPU Core Voltages, +3.3V, +5V, +12V, 5V Standby, VBAT
- CPU 4-Phase-switching voltage reulator
|
| LÜFTER | - Total up to 9-fan status tachometer monitoring
- Up to nine 3-pin fan headers
- Status Monitor für Geschwindigkeitskontrolle
- Support 3-pin fans with fan-speed control
|
| Temperatur | - Überwachung für CPU und Gehäuse Umgebung
- CPU Themal-Trip Unterstützung
- PC Temperature Sensing Logic
|
| LED | - CPU / System Overheat LED
- Suspend-State Indicator LED
- +5 V Standby Alarm LED
|
| Andere Features | - Gehäuse Zugriff Erkennung
- Gehäuse Zugriff Header
|
| |
System BIOS |
| BIOS Typ | - 8 Mb Flash EEPROM mit AMI BIOS
- SST 49LF080A BIOS Chip
|
| BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- USB Keyboard Unterstützung
- SMBIOS 2.3
|