| |
Produkt-Artikelnummern |
| AS-1021M-T2RV | A+ Server 1021M-T2RV (Silver) |
| AS-1021M-T2RB | A+ Server 1021M-T2RB (Black) |
| |
Mainboard |
| Super H8DMR-i2 |
| |
Processor/Chipset |
| CPU | - Dual 1207-pin Socket F
- Supports up to two Six-Core AMD Opteron™ 2000 Series (Socket F) processors
- Single CPU configurations are not recommended
- HT3.0 Link support
|
| Chipsatz | - nVidia nForce MCP55 Pro
- NEC uPD720400
|
| |
Arbeitsspeicher |
| Speicherkapazität | - 8x 240-pin DIMM sockets support up to
- 64GB DDR2 800/667/533/400 MHz SDRAM
- Single or Dual (recommended) channel memory support
- For Single CPU: Memory must be populated in CPU1 DIMMs only
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
|
| Speicher Typ | DDR2 800/667/533/400MHz Reg. ECC SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Größen | 256 MB, 512 MB, 1GB, 2GB, 4GB, 8GB |
| Speicherspannung | 1.8 V ausschließlich |
| Fehlererkennung | - Korrigiert Einzel-Bit Fehler
- Entdeckt Zwei-Bit Fehler (mit ECC Speicher)
|
| |
On-Board Geräte |
| SATA | - nVidia MCP55 Pro SATA2 3.0Gbps Controller
- 6 SATA Ports
- nVidia RAID 2.0
- SATA RAID 0, 1, 0+1, 5, JBOD Support
|
| IPMI | - 1U support: Intelligent Platform Management Interface v.2.0+ (Optional: AOC-SIM1U-3B(+) R 3.00)
- For Dedicated 3rd DATA LAN, use both AOC-SIM1U-3B(+) + AOC-SIM1U-3D
- Remote Management Module
- (Add-on Cards not included)
|
| Netzwerk Controller | - nVidia MCP55 Pro Chipset Dual-port LAN / Ethernet Controller
- Supports 10Base-T, 100Base-TX, and 1000Base-T, RJ45 output
|
| Grafik | ATI ES1000 graphics controller |
| Super I/O | Winbond 83627HF |
| |
Input / Output |
| Serial ATA | - Six SATA2 Ports
- Four SATA2 hard drives supported
|
| IDE | - Single EIDE channel support up to two UDMA IDE devices
- Supports UDMA Mode 5
- Supports PIO Mode 4
- Supports ATA 100/133
|
| Floppy | 1 Floppy port, 1.44 MB |
| LAN | 2 RJ45 LAN Ports |
| USB | - FUCI
- Up to 4 USB Ports 2.0 Compliant, 1.1 Compatible
- 2 Rear Ports
- 2 Internal Headers
|
| VGA | 1x VGA Port |
| Tastatur / Maus | PS/2 Keyboard und Maus Ports |
| Serial Ports | - 1x Fast UART 16550 Serial Port
- 1x Header
|
| |
System BIOS |
| BIOS Typ | - 8 Mb Flash EEPROM mit AMI BIOS
- SST49LF080A BIOS Chip
|
| BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- USB Keyboard Unterstützung
|
| |
Gehäuse |
| Form Faktor | 1 HE Rackmount |
| Model | SC815TQ-R650 |
| |
Dimensionen |
| Höhe | 1.7" (43 mm) |
| Breite | 17.2" (437mm) |
| Tiefe | 25.6" (650mm) |
| Bruttogewicht | 44 lbs (19.9kg) |
| Verfügbare Farben | Silber, Schwarz |
| |
Frontabdeckung |
| Knöpfe | - Stromschalter
- System-Reset Schalter
|
| LEDs | - Strom LED
- Festplatten-Aktivitäts LED
- 2x Netzwerk Aktivitäts LEDs
- System-Überhitzungs LED
|
| |
Erweiterungsslots |
| Linker Universal-Slot | - 1 PCI-express x8 Slot OR
- 1 64-bit 133MHz PCI-X slot
|
| rechter Universal-Slot | - 1 PCI-express x8 Slot OR
- 1 64-bit 133MHz PCI-X slot
|
| |
Laufwerkschächte |
| Hot-Swap | 4 x 3.5" Hot-swap SATA drive bays |
| |
SATA Backplane |
| 1U SATA / SAS Backplane w/ AMI 9071 chip |
| |
Preiphere Laufwerke |
| DVD-ROM | Slim 8x DVD, 24x CD, DVD-ROM Laufwerk |
| |
Systemkühlung |
| Lüfter | 4x Kühlungs-Lüfter |
| |
Netzteil |
| 650W AC power supply w/ PFC |
| AC Spannung | 100 - 240 V, 60-50 Hz, 8-4 A |
| +5 V Standby | 3 A |
| +12 V | 54 A |
| Mit Power Distributor | - +5 V: 25 A
- +3.3 V: 12 A
- -12V: 0.6 A
|
| +5 V | 25 A |
| +3.3 V | 12 A |
| -12 V | 0.5 A |
| |
PC Health Überwachung |
| CPU | - Monitors CPU Core Voltages, +1.5V, +3.3V, +5V, ±12V, 5V Standby, HyperTransport Link voltage 1.2V, memory voltage 1.8V, VBAT, Chipset
- CPU 4-Phase-switching voltage reulator
|
| LÜFTER | - Total up to 5-fan status tachometer monitoring
- Up to five 3-pin fan headers
- Status Monitor für Geschwindigkeitskontrolle
- Stauts monitor for on/off control
- Support 3-pin fans with fan-speed control
- Lüfter Geschwindigkeitskontrolle für geringe Lautstärke
- Overheat backup fan connector
|
| Temperatur | - Überwachung für CPU und Gehäuse Umgebung
- CPU Themal-Trip Unterstützung
- I²C Temperatur-Messungs Logik
|
| LED | - CPU / System Overheat LED
- Suspend-State Indicator LED
- +5 V Standby Alarm LED
|
| Andere Features | - Gehäuse Zugriff Header
- Gehäuse Zugriff Erkennung
|
| |
Betriebs-Umgebung / Compliance |
| RoHS | RoHS konform |
| Umgebungsbedingungen | - Betriebstemperatur: 10° bis 35 °C (50° bis 95 °F)
- Temperatur ohne Betrieb: -40° bis 70°C (-40° bis 158°F)
- Relative Luftfeuchtigkeit für Betrieb: 8% bis 90% (nicht kondensierend)
- Relative Luftfeuchtigkeit ohne Betrieb: 5% bis 95% (nicht kondensierend)
|
0 Artikel
