|
Product SKUs |
SuperWorkstation | SYS-7047AX-72RF (Black) |
|
Motherboard |
Super X9DAX-7F |
|
Processor/Cache |
CPU | - Intel Xeon processor E5-2600 and E5-2600 v2 family
- (up to 150 W TDP)
- Dual Socket R (LGA 2011)
|
Note | BIOS version 3.0 or above is required |
Cache | Up to 20 MB |
System Bus | QPI up to 8 GT/s |
|
System Memory |
Memory Capacity | - 16x 240-pin DDR3 DIMM sockets
- Up to 1 TB DDR3 ECC LRDIMM
- Up to 512 GB DDR3 ECC registered memory (RDIMM)
|
Memory Type | 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes | 32 GB, 16 GB, 8 GB, 4 GB, 2 GB, 1 GB |
Memory Voltage | 1.5 V, 1.35 V |
Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
|
On-Board Devices |
Chipset | Intel C602 chipset |
SATA | - SATA 2.0 3 Gb/s with RAID 0, 1, 5, 10
- SATA 3.0 6 Gb/s with RAID 0, 1
|
SAS | - SAS-2 from LSI 2208
- RAID 0,1,5,6,10,50,60 support
|
IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Nuvoton WPCM450 BMC
|
Network Controllers | - Intel i350 Dual port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
Audio | RealTek ALC889 7.1 High Definition Audio with S/PDIF header |
Graphics | Matrox G200eW |
|
Input / Output |
SATA | - 2x SATA 3.0 ports (6 Gb/s)
- 8x SATA 2.0 ports (3 Gb/s)
|
SAS | 8x SAS-2 ports (6 Gb/s) |
LAN | - 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
USB | - 2x USB 3.0 (2 rear)
- 6x USB 2.0 (2 front + 4 rear)
|
Audio | Line-in / Line-out / Microphone ports |
Video | 1x VGA port |
Serial Port / Header | 2x Fast UART 16550 ports |
IEEE 1394a | 2x Headers |
|
Expansion Slots |
PCI-Express | - 2x PCI-E 3.0 x16 slots
- 3 PCI-E 3.0 x8 slots
- 1x UIO PCI-E 3.0 x8 (for SMC UIO) or
- 1x PCI-E 2.0 x4 (in x8) slot
|
|
System BIOS |
BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS |
BIOS Features | - Plug and Play (PnP)
- APM 1.2
- DMI 2.3
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
|
Chassis |
Form Factor | - 4U Rackmountable / Tower
- Optional Rackmount Kit
|
Model | CSE-747TG-R1K28B-SQ |
|
Dimensions |
Height | 18.2" (462mm) |
Width | 7.0" (178 mm) |
Depth | 26.5" (673mm) |
Gross Weight | 71 lbs (32.2 kg) |
Available Colors | Black |
|
Front Panel |
Buttons | - Power On/Off button
- System Reset button
|
LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat / Fan Failure LED
|
Ports | 2x front USB 2.0 Ports |
|
Drive Bays |
Hot-Swap | 8x Hot-swap 3.5" SATA Drive Trays |
Peripheral Bay(s) | - 2x 5.25" Peripheral Drive Bay
- 1x 5.25" Bay for Floppy Drive
|
|
SAS / SATA Backplane |
SAS / SATA Hard Drive Backplane w/ AMI MG9072 |
|
System Cooling |
Fans | 2x Exhaust Fans and 4x Internal Fans |
Heatsink | 2x Optional Active heatsink with optimal fan speed control (SNK-P2050AP4) |
|
Power Supply |
1280 W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2 |
AC Input | - 1000 W Output @ 100-140 V, 12-8 A, 50-60 Hz
- 1280 W Output @ 180-240 V, 8-6 A, 50-60 Hz
|
DC Output | - 1000 W: +12 V / 83 A; +5 V sb / 4 A
- 1280 W: +12 V / 106.7 A, +5V sb / 4 A
|
Certification | Platinum Certified |
|
PC Health Monitoring |
CPU | - Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
- 6-Phase-switching voltage regulator
|
FAN | - Total of three fan headers supporting up to 8 fans
- Three 4-pin fan headers
- 3x fans with tachometer status monitoring
- Supports 3-pin fans (w/o speed control)
- Low noise fan speed control (4-pin fan only)
|
Temperature | - Monitoring for CPU and chassis environment
- Thermal Control for 8x fan connectors
- PECI
|
Other Features | - Chassis intrusion detection
- Chassis intrusion header
|
|
Operating Environment / Compliance |
RoHS | RoHS Compliant |
Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|