| |
Product SKUs |
| SYS-5015P-8R | SuperServer 5015P-8R (Beige) |
| SYS-5015P-8RB | SuperServer 5015P-8RB (Black) |
| |
Motherboard |
| Super PDSMP-8 |
| |
Processor/Cache |
| CPU | - Single LGA775 ZIF Socket
- Supports an Intel Pentium D (Smithfield Dual Core) processor
- Supports an Intel Pentium Extreme Edition processor
- Supports an Intel Pentium 4 processor
- Supports an Intel Pentium 4 Extreme Edition processor
- Supports an Intel Celeron D processor
- Hyper-Threading (HT) capable
|
| System Bus | 1066 / 800 / 533 MHz system bus |
| |
System Memory |
| Memory Capacity | - Four 240-pin DIMM sockets
- Supports up to 8 GB of unbuffered, ECC DDR2 667/533/400 MHz memory (Single / Dual Channel)
|
| Memory Type | DDR2 667/533/400 MHz unbuffered, ECC SDRAM, 240-pin gold-plated DIMMs |
| DIMM Sizes | 256 MB, 512 MB, 1 GB, 2 GB |
| Memory Voltage | 1.8 V only |
| |
On-Board Devices |
| Chipset | - Intel E7230 (Mukilteo) Smithfield chipset
- ICH7R + PXH + Intel 82573V
|
| SCSI | - Adaptec AIC-7902
- Host RAID (0, 1, 10)
|
| SCSI ZCR | - Support for Zero-Channel RAID
- (Card NOT included)
|
| IPMI | - 1U support for Intelligent Platform Management Interface v.2.0 (Optional: 1UIPMI-B)
- 3rd LAN (Optional: AOC-1UIPMI-LANG)
|
| Network Controllers | - Dual-port Intel 82573V Gigabit PCI-Express Ethernet (Tekoa)
- Supports 1000BASE-TX, RJ45 output
|
| VGA | On-board ATI RageXL graphics, 8MB |
| Super I/O | Winbond 83627HF chip |
| |
Expansion Slots |
| PCI-Express / PCI-X | - 1x Universal (SXB-E) slot for [1x (x4) PCI-E Slot] OR[1x 64-bit PCI-X 133 MHz slot]
- 1x 64-bit PCI-X 100 MHz slot (ZCR Support)
- 1x 1U IPMI Slot
|
| |
Input / Output |
| SCSI | 2x Ultra320 Single Channel SCSI Connectors |
| IDE | - One EIDE channel supports up to two UDMA/IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
| Floppy | 1x Floppy controller; 1.44 MB, 2.88 MB, 3-mode support |
| LAN | 2x RJ45 LAN ports |
| USB | 2x USB 2.0 compliant / 1.1 compatible rear ports |
| VGA | 1x VGA port |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Ports | - 1x Fast UART 16550 serial port
- 1x serial header
|
| |
Chassis |
| Form Factor | 1U Rackmount |
| Model | SC816S-R400 |
| |
Dimensions |
| Height | 1.7" (43 mm) |
| Width | 17.2" (437mm) |
| Depth | 27" (685.8mm) |
| Gross Weight | 46 lbs (20.9 kg) |
| Available Colors | Beige, Black |
| |
Front Panel |
| Buttons | - Power On/Off button
- UID button
|
| LEDs | - Power / Power Fail LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat / Fan Failure LED
- UID LED
|
| Ports | N/A |
| |
Drive Bays |
| Hot-Swap | 4x 3.5" Hot-swap Ultra320/160 SCSI drive bays |
| |
Peripheral Drives |
| Floppy | TEAC 3.5" 1.44 MB Slim Floppy Drive |
| DVD-ROM | Panasonic Slim 8x DVD-ROM drive |
| |
SCSI Backplane |
| 1x SCA814S 1U SCSI Backplane w/ SAF-TE |
| |
System Cooling |
| Fans | 3x 4cm 12.000 RPM Nidec dual blade fans |
| |
Power Supply |
| 400W (1 + 1) Redundant AC power supply with PFC |
| AC Voltage | 100 - 240V, 50-60Hz, 6A-3A A |
| +5 V | 24 A |
| +5 V standby | 4 A |
| +12 V | 32 A |
| -12 V | 0.6 A |
| +3.3 V | 21 A |
| |
PC Health Monitoring |
| CPU | - Monitors for CPU Cores (+3.3V, +5, 12V, +5V Standby)
- CPU core 4-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
|
| FAN | - Fan Speed Control
- Total of four proprietary fan headers
- 4 fans with tachometer monitoring
- Status Monitor with firmware / software speed control
|
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Monitor 2 (TM2) Support
|
| LED | - CPU / System Overheat LED
- +5 V standby alert LED
- Supsend-State Indicator LED
|
| Other Features | - Chassis Intrusion Detection
- Chassis Intrusion Header
|
| |
System BIOS |
| BIOS Type | 8Mb Flash EEPROM with Phoenix BIOS |
| BIOS Features | - Plug and Play (PnP)
- DMI 2.3 support
- PCI 2.2
- ACPI 1.0
- Hardware BIOS Virus protection
- USB Keyboard support
|
0 Articoli
