|
Product SKUs |
SYS-4047R-7JRFT | SuperServer 4047R-7JRFT (Black) |
|
Motherboard |
Super X9QR7-TF-JBOD |
|
Processor/Cache |
CPU | - Intel Xeon processor E5-4600 v2 (12-Core)** or E5-4600 (8-Core) family
- Quad Socket R (LGA 2011)
- ** BIOS rev. 3.0 or above is needed to support Ivy Bridge-EP 4S.
|
Cache | Up to 30 MB |
System Bus | QPI up to 8 GT/s |
|
System Memory |
Memory Capacity | - 24x 240-pin DDR3 DIMM sockets
- Supports up to 768 GB DDR3 ECC registered memory (RDIMM)
|
Memory Type | 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes | 32 GB, 16 GB, 8 GB, 4 GB, 2 GB, 1 GB |
Memory Voltage | 1.5 V, 1.35 V |
Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
|
On-Board Devices |
Chipset | Intel C602 chipset |
AHCI SATA | - SATA 2.0 3 Gb/s with RAID 0, 1, 5, 10
- SATA 3.0 6 Gb/s with RAID 0, 1
|
SCU SATA | SATA 2.0 3 Gb/s with RAID 0, 1, 10 |
SAS | - SAS-2 via Dual LSI 2308
- (IT mode)
|
IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Nuvoton WPCM450 BMC
|
Network Controllers | - Intel X540 Dual port 10GBase-T
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBase-T
- , 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
Graphics | Matrox G200 (Nuvoton WPCM450 BMC) |
Super I/O | Nuvoton W83527HG |
|
Input / Output |
SAS | SAS-2 ports (6 Gb/s) (IT mode) |
LAN | - 2x RJ45 10GBase-T ports
- 1x dedicated LAN port for IPMI
|
USB | 10x USB 2.0 ports total(4x rear + 4x via header + 2x Type A) |
Serial Port / Header | 2x Fast UART 16550 ports: 1 rear and 1 header |
|
System BIOS |
BIOS Type | 16Mb SPI Flash EEPROM with AMI BIOS |
BIOS Features | - Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
|
|
Chassis |
Form Factor | - Tower / 4U Rackmountable
- Rackmount Kit (MCP-290-00057-0N)
|
Model | CSE-418E16-R1K62B2 |
|
Dimensions |
Height | 7.0" (178 mm) |
Width | 17.2" (437mm) |
Depth | 29" (737 mm) |
Weight | - Net Weight: 60 lbs (27.2 kg)
- Gross Weight: 100 lbs (45.4 kg)
|
Available Colors | Black |
|
Drive Bays |
Hot-Swap | 48x 2.5" Hard drive bays |
|
Expansion Slots |
PCI-Express | 8x PCI-E 3.0 x16 slots(1x PCI-E 3.0 x8 in x16 slot) |
|
Backplane |
SAS/SATA HDD Backplane |
|
System Cooling |
Fans | - 4x 92mm RPM Hot-Swap Cooling Fans
- 2x 80mm RPM Hot-Swap Rear Exhaust Fan
|
Shrouds | 1x Air Shroud (MCP-310-84805-0B) |
|
Power Supply |
1620 W high-efficiency redundant power supply w/ PMBus |
AC Input | - 1000 W Output @ 100-120 V, 12-10 A, 50-60 Hz
- 1200 W Output @ 120-140 V, 12-10 A, 50-60 Hz
- 1620 W Output @ 180-240 V, 10.5-8 A, 50-60 Hz
|
DC Output | - 1000 W: +12 V / 84 A; +5 V sb / 4 A
- 1200 W: +12 V / 100 A; +5V sb / 4 A
- 1620 W: +12 V / 150 A; +5 V sb / 4 A
|
Certification | Platinum Certified |
|
PC Health Monitoring |
CPU | - Monitors for CPU cores, +1.2 V, 1.5 V, +3.3 V, +12 V, (+3 V, 1.0 V, 1.2 V, 1.8 V, 1.1 V) Standby, VBAT, Memory, chipset voltages.
- 4-Phase-switching voltage regulator with auto-sense from 0.6 V-1.35 V
|
FAN | - 4-pin fan headers with tachometer status monitoring
- Low noise fan speed control mode
|
Temperature | - Monitoring for CPU and system environment
- Thermal Control for 8x fan connectors
|
Other Features | Chassis intrusion detection |
|
Operating Environment / Compliance |
RoHS | RoHS Compliant |
Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|