|
Product SKUs |
SYS-F627R3-R72B+ | SuperServer F627R3-R72B+ (Black) |
|
Motherboard |
Super X9DRFR |
|
Processor/Cache |
CPU | - Intel Xeon processor E5-2600 and E5-2600 v2 family
- (up to 135W TDP; 130W TDP up to 47°C *)
- Dual Socket R (LGA 2011)
- * For details, refer to the user manual
|
Note | BIOS version 3.0 or above is required |
Cache | Up to 30 MB |
System Bus | QPI up to 8 GT/s |
|
System Memory (per node) |
Memory Capacity | - 16x 240-pin DDR3 DIMM sockets
- Up to 1 TB DDR3 ECC LRDIMM
- Up to 512 GB DDR3 ECC registered memory (RDIMM)
- Up to 128 GB DDR3 ECC unbuffered memory (UDIMM)
|
Memory Type | 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes | 32 GB, 16 GB, 8 GB, 4 GB, 2 GB, 1 GB |
Memory Voltage | 1.5 V, 1.35 V |
Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
|
On-Board Devices |
Chipset | Intel C602 chipset |
AHCI SATA | - SATA 2.0 3 Gb/s with RAID 0, 1, 5, 10
- SATA 3.0 6 Gb/s with RAID 0, 1
|
SCU SATA | SATA 2.0 3 Gb/s with RAID 0, 1, 10 |
IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Nuvoton WPCM450 BMC
|
SAS | - SAS-2 via LSI 2208
- HW RAID 0, 1, 5, 6, 10, 50, 60 support
|
Network Controllers | - Intel i350 Dual port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
Graphics | Matrox G200eW |
|
Input / Output (per Node) |
AHCI SATA | - 2x SATA 3.0 ports (6 Gb/s)
- 4x SATA 2.0 ports (3 Gb/s)
|
SCU SATA | 2x SATA 2.0 ports (3 Gb/s) |
SAS | 8x SAS 2.0 ports (6 Gb/s) |
LAN | - 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
USB | 2x USB 2.0 ports |
VGA | 1x VGA port |
Serial Port / Header | 1x Fast UART 16550 port |
|
Chassis |
Form Factor | 4U Rackmount |
Model | CSE-F424AS-R1K28B |
|
Dimensions |
Width | 17.63" (448mm) |
Height | 6.96" (177mm) |
Depth | 29" (737 mm) |
Package | 28.3" (W) x 15.0" (H) x 42.4" (D) |
Weight | - Net Weight: 105 lbs (47.63 kg)
- Gross Weight: 150 lbs (68.04 kg)
|
Available Colors | Black |
|
Front Panel |
Buttons | - Power On/Off button
- System Reset button
|
LEDs | - Power status LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- Power fail LED
|
|
Expansion Slots (per node) |
PCI-Express | - 1x PCI-E 3.0 x16 (LP) + 1x Micro LP
- MicroLP Adapter Matrix (Networking options)
|
|
Drive Bays (per node) |
Hot-Swap | (6+2) 3.5" Hot-swap SAS-2/SATA HDD trays |
|
Backplane |
1x SAS-2 / SATA backplane |
|
System Cooling (per node) |
Fans | 2x 8cm 11k RPM middle fans |
|
Power Supply |
1280 W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2 |
AC Input | - 1000 W Output @ 100-140 V, 12-8 A, 50-60 Hz
- 1280 W Output @ 180-240 V, 8-6 A, 50-60 Hz
|
DC Output | - 1000 W: +12 V / 83 A; +5 V sb / 4 A
- 1280 W: +12 V / 106.7 A, +5V sb / 4 A
|
Certification | Platinum Certified |
|
System BIOS |
BIOS Type | 128 Mb SPI Flash EEPROM with AMI BIOS |
BIOS Features | - Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
|
Operating Environment / Compliance |
RoHS | RoHS Compliant |
Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|