| |
Product SKUs |
| MBD-X8DA6
-O | - X8DA6
- (Standard Retail Pack)
|
| MBD-X8DA6
-B | |
| |
Physical Stats |
| Form Factor | Extended ATX |
| Dimensions | 12" x 13" (30.5cm x 33cm) |
| |
Processor/Cache |
| CPU | - Dual 1366-pin LGA Sockets
- Supports up to two Intel 64-Bit Xeon processor(s) of the same type below:
- Intel Xeonprocessor 5600 Series (Westmere)
- Intel Xeonprocessor 5500 Series (Nehalem-EP)
|
| QPI | Up to 6.4 GT/s |
| |
System Memory |
| Memory Capacity | - 12x 240-pin DIMM sockets
- Supports up to 192 GB 1333 / 1066 / 800 MHz DDR3 ECC registered memory
- Supports up to 48 GB 1333 / 1066 / 800 MHz DDR3 ECC / Non ECC unbuffered memory
- Memory Mirroring supported
|
| Memory Type | 1333 / 1066 / 800MHz ECC registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | - 1GB, 2GB, 4GB
- , 8 GB
- , 16 GB
|
| Memory Voltage | 1.5 V / 1.35 V |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel x4 and x8 Single Device Data Correction (SDDC)
|
| |
On-Board Devices |
| Chipset | - Intel 5520 (Tylersburg) chipset
- ICH10R + IOH-36D
|
| SAS | - LSI 6 Gb/s SAS 2008
- RAID 0, 1, 10 support
- (Optional: AOC-SAS-2-RAID5-KEY) RAID 5 support
|
| SATA | - Intel ICH10R SATA 3.0 Gb/s controller
- RAID 0, 1, 5, 10 support (Windows)
- RAID 0, 1, 10 support (Linux)
|
| Audio | Realtek ALC888 7.1 HD audio |
| Super I/O | Winbond 83627DHG chip |
| |
Input / Output |
| SAS | 8x 6 Gb/s SAS / SATA ports |
| Serial ATA | - Six Serial ATA ports
- Six SATA hard drives supported
|
| LAN | 2x RJ45 LAN ports |
| USB | - 4x USB rear ports
- 4x USB internal headers
- Total 9x USB 2.0 Compliant
|
| Audio | Realtek ALC888 7.1 HD audio |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Port | 2x Fast UART 16550 serial ports |
| Firewire | 2x IEEE 1394a headers |
| |
OS compatibility |
| Please see our OS Compatibility Chart |
| |
Chassis ( Optimized for X8DA6
) |
| 2U Chassis | - CSE-826E26-R1200LPB
- CSE-826TQ-R800LPB
|
| 3U Chassis | - CSE-836E16-R1200B
- CSE-836E26-R1200B
- CSE-933T-R760B
- CSE-936A-R1200B
|
| Tower / 4 U Rackmount | - CSE-747TG-R1400B-SQ
- CSE-846A-R1200B
- CSE-846TQ-R900B
- CSE-847E26-R1400LPB
|
| Important Chassis Notes | To support the new generation Intel® Xeon® processor-based motherboards, a Revision K chassis is recommended for most models. Please talk to your sales representative or follow the link for details. |
| |
Expansion Slots |
| PCI-Express | - 1x (x16) PCI-E 2.0 slots
- 2 (x4) PCI-E 2.0 (in x8 slot)
- 1x (x4) PCI-E (in x8 slot)
|
| PCI-X | 3x 133/100MHz PCI-X slots |
| |
System BIOS |
| BIOS Type | 32Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | - Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
|
| |
Management |
| Software | SuperDoctor® III |
| Power Configurations | ACPI / ACPM Power Management |
| |
PC Health Monitoring |
| Voltage | - Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
- 6-Phase-switching voltage regulator
|
| FAN | - Total of eight fan headers supporting up to 8 fans
- Eight 4-pin fan headers
- 8x fans with tachometer status monitoring
- Supports 3-pin fans (w/o speed control)
- Low noise fan speed control (4-pin fan only)
|
| Temperature | - Monitoring for CPU and chassis environment
- Thermal Control for 8x fan connectors
- PECI
|
| Other Features | - Chassis intrusion detection
- Chassis intrusion header
|
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant 6/6, Pb Free |
| Environmental Specifications | - Operating Temperature: 10° to 35 °C (50° to 95 °F)
- Non-operating temperature: -40° to 70 °C (-40° to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5 to 95% (non-condensing)
|
0 Articoli
