| |
Product SKUs |
| MBD-X7SLA-H -O | X7SLA-H (Standard Retail Pack) |
| MBD-X7SLA-H -B | X7SLA-H (Bulk Pack) |
| |
Physical Stats |
| Form Factor | FlexATX |
| Dimensions | 9" x 7.5" (22.86cm x 19.05cm) |
| |
Processor/Cache |
| CPU | Intel® Atom? 330 Dual-Core 1.6GHz processor |
| System Bus | 533 MHz system bus |
| |
System Memory |
| Memory Capacity | - Two 240-pin DIMM sockets
- Supports up to 2 GB of unbuffered, non-ECC DDR2 667*/533/400 MHz memory (Single / Dual Channel)
|
| Memory Type | DDR2 667*/533/400 MHz unbuffered, non-ECC SDRAM, 240-pin gold-plated DIMMs |
| DIMM Sizes | 256 MB, 512 MB, 1 GB, 2 GB |
| Memory Voltage | 1.8 V only |
| |
On-Board Devices |
| Chipset | - Intel 945GC + ICH7R
- Realtek RTL8111C-GR
|
| SATA | - Intel ICH7R SATA 3.0 Gb/s controller
- RAID 0, 1, 5, 10 support (Windows Only)
|
| Network Controllers | - 2x Realtek RTL8111C-GR Gigabit Ethernet
- Supports 10BASE-T, 100/1000BASE-TX, RJ45 output
|
| Graphics | On-board GMA950 video |
| Super I/O | Winbond 83627DHG-P chip |
| Clock Generator | CK505 |
| |
Input / Output |
| Serial ATA | - Four SATA ports ( 3 Gb/s )
- Four SATA hard drives supported
|
| IDE | - One EIDE channel supports up to two UDMA/IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
| LAN | 2x RJ45 LAN ports |
| USB | - 8x USB 2.0 / 1.1 compatible
- 2x rear + 3 headers (5 ports) + 1 Type A connector
|
| VGA | Intel GMA950 |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Ports | - 1x Fast UART 16550 serial port
- 1x Serial Header
|
| |
System BIOS |
| BIOS Type | 8Mb Flash EEPROM with AMI BIOS |
| BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0 / 3.0
- USB Keyboard support
- SMBIOS 2.3
|
| |
OS compatibility |
| Please see our OS Compatibility Chart |
| |
Chassis ( Optimized for X7SLA-H ) |
| 1U Chassis | CSE-502L-200B |
| |
Expansion Slots |
| PCI-Express | - 1x (x8) PCI-Express Slot
- 1x (x4) PCI-Express (in x8 slot)
|
| PCI | 1x 32-bit 33MHz PCI (5V) slots |
| |
Management |
| Software | - SuperDoctor® III
- Watch Dog
|
| Power Configurations | - ACPI/APM Power Management
- Main Switch Override Mechanism
- Suspend to RAM (STR)
- Power-on mode control for AC power recovery
- Internal / External modem remote ring-on
|
| |
PC Health Monitoring |
| Voltage | - Monitors for CPU cores, +3.3 V, +5 V, +12 V, +3.3 V Standby, VBAT, Memory, chipset
- CPU core 1-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
|
| FAN | - Total of four 4-pin fan headers
- 4x fans with tachometer monitoring
- Status monitor for speed control
- Status Monitor for on / off control
- Supports 3-pin fans (without speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan conn.
|
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 4 x Fan Connectors
- I²C temperature sensing logic
- Thermal Monitor 2 (TM2) Support
|
| LED | CPU / System Overheat LED |
| Other Features | - Chassis intrusion Detection
- Chassis intrusion Header
- SDDC Support
|
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant 6/6, Pb Free |
| Environmental Specifications | - Operating Temperature: 0° to 50 °C
- Non-operating temperature: -40° to 70 °C
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5 to 95% (non-condensing)
|
| |
Regulatory |
| FCC | Class B |
0 Articoli
