| |
Product SKUs |
| MBD-X7SBi-LN4
-O | - X7SBi-LN4
- (Standard Retail Pack)
|
| MBD-X7SBi-LN4
-B | |
| |
Physical Stats |
| Form Factor | ATX |
| Dimensions | 12" x 9.6 ", (30.48cm x 24.38 cm) |
| |
Processor/Cache |
| CPU | - Single LGA775 ZIF Socket
- Supports Quad-Core Intel Xeon X3300/X3200 series
- Supports Dual-Core Intel Xeon E3100/3000 series
- Supports Intel Xeon processor L3360 and L3110 series
- Supports Intel® Core?2 Quad Q9000/Q8000/Q6000 series
- Supports Intel® Core?2 Duo E8000/E7000/E6000/E4000 series
- Supports Intel Pentium E5000/E2000 series
- Supports Intel Celeron E1000 and 400 series
- NOTE: Intel Xeon processor L3014 requires an LGA771 socket and is not supported.
|
| System Bus | 1333 / 1066 / 800 MHz system bus |
| |
System Memory |
| Memory Capacity | - Four 240-pin DIMM sockets
- Supports up to 8 GB of unbuffered ECC / non-ECC DDR2 800/667MHz memory (Dual Channel)
|
| Memory Type | DDR2 800/667 MHz unbuffered ECC / non-ECC SDRAM, 240-pin gold-plated DIMMs |
| DIMM Sizes | 256 MB, 512 MB, 1 GB, 2 GB |
| Memory Voltage | 1.8 V only |
| |
On-Board Devices |
| Chipset | - Intel® 3200 chipset
- ICH9R chipset
|
| Serial ATA | - Intel® ICH9R SATA2 (3 Gbps) controller built-in
- RAID 0, 1, 5, 10 support (Windows Only)
- RAID 0, 1, 10 support (Linux)
|
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN & optional KVM over LAN support
- SIMSO Slot - Supermicro Intelligement Management
- (Optional: AOC-SIMSO-HTC, AOC-SIMSO+)
- NOTE: AOC-SIMSO+ must use Dedicated LAN for KVM-over-LAN function
|
| Network Controllers | - 4x Single-port Intel® 82573V/L Gigabit PCI-Express Ethernet Controllers
- Supports 10BASE-T, 100BASE-T, 1000BASE-T, RJ45 output
|
| VGA | On-board ATI ES1000 (32MB) graphics |
| Super I/O | Winbond 83627HF chip |
| Clock Generator | IC59LPRS511 |
| |
Input / Output |
| Serial ATA | - Six Serial ATA ports (3 Gb/s performance)
- Six SATA hard drives supported
|
| IDE | - One EIDE channel supports up to two UDMA/IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
| Floppy | 1x Floppy controller; 1.44 MB |
| LAN | 4x RJ45 LAN ports |
| USB | - 8x USB 2.0 / 1.1 compatible
- 2 rear ports + 2 headers + 2 on-board connectors
|
| VGA | 1x VGA port |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Ports | - 1x Fast UART 16550 serial port
- 1x internal header
|
| Parallel Port | 1x ECP / EEP Parallel Header |
| |
OS compatibility |
| Please see our OS Compatibility Chart |
| |
Chassis ( Optimized for X7SBi-LN4
) |
| 1U Chassis | - CSE-512-200B
- CSE-512F-260
- CSE-512L-260B
- CSE-513F-260
- CSE-513L-260
- CSE-811T-260
- CSE-813MT-300C
|
| Mid-Tower | - CSE-733E-465B
- CSE-733i-465B
- CSE-733T-465B
- CSE-733TQ-465B
|
| Tower / 4 U Rackmount | CSE-743TQ-865B |
| Important Note | For a general system, a 420W (minimum) ATX12V power supply [8-pin +12V AND 24-pin is recommended to assure system stability]. |
| |
Expansion Slots |
| PCI-X | 1x 64 bit PCI-X 133 Mhz slot |
| PCI | 1 32 bit PCI slot |
| |
System BIOS |
| BIOS Type | 16Mb Flash EEPROM with Phoenix BIOS |
| BIOS Features | - Plug and Play (PnP)
- DMI 2.3 support
- PCI 2.2
- ACPI 1.0/2.0
- USB Keyboard support
- SMBIOS 2.3
|
| |
Management |
| Software | - Optional IPMI (Intelligent Platform Management Interface) 2.0
- SuperDoctor® III
- Watch Dog
- NMI
- W83793 H/W Monitor
|
| Power Configurations | - ACPI Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Keyboard wakeup from soft-off
- Power-on mode control for AC power loss recovery
- Internal/External modem remote ring-on
- Suspend to RAM(STR)
|
| |
PC Health Monitoring |
| Voltage | - Monitors for CPU Cores +1.8V, +3.3V, +5V, ±12V, 3.3V Standby, 5V Standby, VBAT
- CPU 4-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
- Adjustable CPU clock frequency ratio (Only available if CPU is supported)
|
| FAN | - Total of six 4-pin fan headers
- 6x fans with tachometer monitoring
- Status Monitor with firmware / software speed control
- Status monitor for on/off control
- Supports 3-pin fans (without speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connector
|
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Monitor 2 (TM2) Support
- PECI
|
| LED | - CPU / System Overheat LED
- Suspend state indicator LED
- +5 V Standby alert LED
|
| Other Features | - Chassis intrusion detection
- Chassis intrusion header
|
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant 6/6, Pb Free |
| Environmental Specifications | - Operating Temperature: 10° to 35 °C (50° to 95 °F)
- Non-operating temperature: -40° to 70 °C (-40° to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5 to 95% (non-condensing)
|
0 Articoli
