|
Product SKUs |
MBD-X7SB3
-O | - X7SB3
- (Standard Retail Pack)
|
MBD-X7SB3
-B | |
|
Physical Stats |
Form Factor | ATX |
Dimensions | 12" x 9.6 ", (30.48cm x 24.38 cm) |
|
Processor/Cache |
CPU | - Single LGA775 ZIF Socket
- Supports Quad-Core Intel Xeon X3300/X3200 series
- Supports Dual-Core Intel Xeon E3100/3000 series
- Supports Intel Xeon processor L3360 and L3110 series
- Supports Intel® Core?2 Quad Q9000/Q8000/Q6000 series
- Supports Intel® Core?2 Duo E8000/E7000/E6000/E4000 series
- Supports Intel Pentium E5000/E2000 series
- Supports Intel Celeron E1000 and 400 series
- NOTE: Intel Xeon processor L3014 requires an LGA771 socket and is not supported.
|
System Bus | 1333 / 1066 / 800 MHz system bus |
|
System Memory |
Memory Capacity | - Four 240-pin DIMM sockets
- Supports up to 8 GB of memory (Dual Channel)
|
Memory Type | DDR2 800/667 MHz unbuffered ECC / non-ECC SDRAM, 240-pin gold-plated DIMMs |
DIMM Sizes | 256 MB, 512 MB, 1 GB, 2 GB |
Memory Voltage | 1.8 V only |
|
On-Board Devices |
Chipset | - Intel 3210 chipset
- ICH9 +2x Intel 82574L + LSI 1068E
|
SAS | - LSI SAS1068E
- RAID 0, 1, 10 support
- (Optional: AOC-IButton68) RAID 5 support
|
Serial ATA | Intel® ICH9 SATA2 (3 Gbps) controller built-in |
Network Controllers | - 2x Single-port Gigabit PCI-Express Ethernet Controllers
- Intel 82574L
- Supports 10BASE-T, 100BASE-T, 1000BASE-T, RJ45 output
|
VGA | Matrox G200eW 8 MB DDR2 |
Super I/O | Winbond 83627DHG chip |
Clock Generator | CK505 |
|
Input / Output |
SAS | 8x SAS / SATA ports |
Serial ATA | - Two Serial ATA ports (3 Gb/s performance)
- Two SATA hard drives supported
|
Floppy | 1x Floppy controller; 1.44 MB |
LAN | 2x RJ45 LAN ports |
USB | - Up to 8x USB 2.0 / 1.1 compliant ports
- 2x rear ports
- 2x internal headers + 2x on-board
|
VGA | 1x VGA port |
Keyboard / Mouse | PS/2 keyboard and mouse ports |
Serial Ports | - 1x Fast UART 16550 serial port
- 1x internal header
|
|
OS compatibility |
Please see our OS Compatibility Chart |
|
Chassis ( Optimized for X7SB3
) |
1U Chassis | - CSE-811T-260
- CSE-811TQ-280
- CSE-813MT-300C
- CSE-813MTQ-280C
|
|
Expansion Slots |
PCI-Express | 1x (x8) PCI-e slot |
PCI | 1 32 bit PCI slot |
|
System BIOS |
BIOS Type | 16Mb Flash EEPROM with Phoenix BIOS |
BIOS Features | - Plug and Play (PnP)
- DMI 2.3 support
- PCI 2.2
- ACPI 1.0/2.0
- SMBIOS 2.3
- USB Keyboard support
|
|
Management |
Software | - SuperDoctor® III
- Watch Dog
- NMI
- W83627DHG(PECI support)
|
Power Configurations | - ACPI Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Keyboard wakeup from soft-off
- Power-on mode control for AC power loss recovery
- Internal/External modem remote ring-on
- Suspend to RAM(STR)
|
|
PC Health Monitoring |
Voltage | - Monitors for CPU cores ( +1.8 V, +3.3 V, +5, ±12 V, +3.3 V Standby, +5 V Standby, VBAT, HT, Memory, chipset)
- CPU core 4-Phase-switching voltage regulator with auto-sense from 0.3750V-1.6000V
- Adjustable CPU clock frequency ratio (only available when CPU is supported)
|
FAN | - Total of five 4-pin fan headers
- 5x fans with tachometer monitoring
- Status Monitor with firmware / software speed control
- Status monitor for on/off control
- Support 3-pin and 4-pin Fan speed control
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connector
|
Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Monitor 2 (TM2) Support
- PECI
|
LED | - CPU / System Overheat LED
- +5 V Standby alert LED
|
Other Features | - Chassis intrusion detection
- Chassis intrusion header
|
|
Operating Environment / Compliance |
RoHS | RoHS Compliant 6/6, Pb Free |
Environmental Specifications | - Operating Temperature: 10° to 35 °C (50° to 95 °F)
- Non-operating temperature: -40° to 70 °C (-40° to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5 to 95% (non-condensing)
|