| |
Product SKUs |
| MBD-X7DVL-3-O | X7DVL-3 (Standard Retail Pack) |
| MBD-X7DVL-3-B | X7DVL-3 (Bulk Pack) |
| |
Physical Stats |
| Form Factor | ATX |
| Dimensions | 12" x 10" (30.5cm x 25.4cm) |
| |
Processor/Cache |
| CPU | - Dual 771-pin LGA Sockets
- Supports up to two Intel 64-Bit Xeon processor(s) of the same type below:
- Quad-Core Intel XeonProcessor 5400/5300 sequence
- (Harpertown/Clovertown processor) up to 3.16 GHz
- Dual-Core Intel Xeon processor 5200/5100/5000 sequence (Wolfdale)
- (Woodcrest/Dempsey processor) up to 3.40 GHz
|
| System Bus | 1333 / 1066 / 667 MHz system bus |
| Operating System Software | - Supports 64-Bit Operating Systems
- Supports 32-Bit Operating Systems
|
| |
System Memory |
| Memory Capacity | - Six 240-pin DIMM sockets
- Supports up to 24 GB 667 / 533MHz DDR2 ECC FB-DIMM memory
- Dual branch memory bus
- Memory must be populated in pairs
- No Memory Mirroring support
|
| Memory Type | 667 / 533 MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 256 MB, 512 MB, 1 GB, 2 GB, 4 GB |
| Memory Voltage | |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel x4 and x8 Single Device Data Correction (SDDC)
|
| |
On-Board Devices |
| Chipset | - Intel 5000V (Blackford VS) chipset
- MCH + ESB2
|
| SAS | - LSI 1068E PCI-E SAS controller
- 8x SAS ports supporting up to 8x SAS HDD
- RAID 0, 1, 10 support
- (Optional: AOC-IButton68) RAID 5 support
|
| SATA | - Intel ESB2 SATA 3.0 Gb/s controller
- RAID 0, 1, 5, 10 support (Windows Only)
|
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- 200-pin IPMI slot
- (Optional: AOC-SIMLC)
|
| Network Controllers | - Two Intel (ESB2/Gilgal) 82563EB Single-Port Gigabit Ethernet Controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
|
| Graphics | XGI Volari? Z7 PCI-E Graphics Processor |
| Clock Generator | ICS932S401EGLF |
| Super I/O | Winbond 83627HF chip |
| |
Input / Output |
| SAS | - Eight SAS ports
- Eight SAS hard drives supported
|
| Serial ATA | - Six Serial ATA ports
- Six SATA hard drives supported
|
| IDE | - Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S)
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
| Floppy | 1x Floppy controller; 1.44 MB Support |
| LAN | 2x RJ45 LAN ports |
| USB | - 2x USB rear ports
- 2x USB internal headers for up to 4-ports
- Total 6x USB 2.0 Compliant / 1.1 Compliant
|
| VGA | 1x VGA Port |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Port / Header | - 1x Fast UART 16550 serial port
- 1x Fast UART 16550 serial header
|
| Parallel Port | 1x Header for ECP / EEP parallel port |
| |
Chassis ( Optimized for X7DVL-3 ) |
| 1U Chassis | - CSE-512F-520B
- CSE-512F-520LB
- CSE-811i-410
- CSE-811T-520
- CSE-811TQ-520B
|
| 2U Chassis | - CSE-825MTQ-R700LPB
- CSE-825TQ-560LPB
- CSE-825TQ-700LP
|
| Mid-Tower | - CSE-733i-645
- CSE-733T-645
- CSE-733TQ-645
|
| Tower / 4 U Rackmount | - CSE-743i-645
- CSE-743T-645
- CSE-743T-650
- CSE-743T-R760
- CSE-743TQ-865B
- CSE-743TQ-R760
|
| Important Chassis Notes | To ensure system stability, a 500W (minimum) ATX power supply[8-pin (+12V) and 24-pin are required] |
| |
Expansion Slots |
| Universal Slot | - 1x (x8) PCI-e slot OR
- 1x 64-bit 133MHz PCI-X Slot
|
| PCI-X | 1x 64-bit 133MHz PCI-X slot |
| PCI | 1x 32-bit 33MHz PCI (5V) slots |
| |
System BIOS |
| BIOS Type | 8Mb Flash EEPROM with Phoenix BIOS |
| BIOS Features | - Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.3
- PCI 2.2
- ACPI 1.0
- BIOS rescue hot keys
- USB Keyboard support
- Hardware BIOS Virus protection
|
| |
Management |
| Software | - Optional IPMI (Intelligent Platform Management Interface) 2.0
- SuperDoctor® III
- Watch Dog
- NMI
|
| Power Configurations | - ACPI Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Power-on mode for AC power recovery
- Internal / External modem remote ring-on
|
| |
PC Health Monitoring |
| Voltage | - Monitors for CPU cores, +3.3 V, +5 V, ±12 V
- 4-Phase-switching voltage regulator with auto-sense from 0.8375 V-1.60 V
- Adjustable CPU Clock Frequency Ratio
|
| FAN | - Total of six proprietary 4-pin fan headers supporting up to 6 fans
- 6x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- 3-pin fan support
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 6x fan connectors
- PSU I²C temperature sensing logic
- Thermal Monitor 2 (TM2) support
|
| LED | - CPU / System Overheat LED
- Supsend-State Indicator LED
- +5 V Standby Alert LED
|
| Other Features | - Chassis intrusion detection
- Chassis intrusion header
- SDDC Support
|
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant 5/6, Server Exemption |
| Environmental Specifications | - Operating Temperature: 10° to 35 °C (50° to 95 °F)
- Non-operating temperature: -40° to 70 °C (-40° to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5 to 95% (non-condensing)
|
| |
OS compatibility |
| Please see our OS Compatibility Chart |
| |
Regulatory |
| FCC | Passed to meet FCC standard requirement |
0 Articoli
